shopping

2010-2025 Toyota 4Runner (5th Gen) - Westcott Designs ARB Compressor Mount

Elevate your off-road setup with the Westcott Designs ARB Compressor Mount, designed to deliver unparalleled durability and functionality. Crafted with precision using the highest quality materials, this mount ensures a secure and reliable fit for your ARB compressor.  

Checkout the 2010-2024 (5th Gen) Toyota 4Runner Molle Panels by Westcott Designs  - Attaches to the4Runner Modular Roof Rack Or 4Runner Lo-Profile Roof Rack Check out the Westcott Designs molle panels for the 2010-2024 (5th Gen) Toyota 4Runner.  You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland Set-up.  Laser cut and powder coated for a strong durable finish attached to the 4Runner Lo-Profile Roof Rack or Modular Roof Rack.   Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your 4Runner.  Available in Driver-Side, Passenger-Side or get the Set! *Disclaimer: MUST HAVE either the Lo-Profile Roof Rack OR Modular Roof Rack for the 4Runner by Westcott Designs to attach the molle panels to the 5th Gen 4Runner.

2010-2024 Toyota 4Runner (5th Gen) Switch Pros Module Engine Bay Mount

The Westcott Designs Switch Pros Engine Bay Module Mount offers a sleek and efficient solution for mounting your Switch Pros module securely inside the engine bay of your 5th Gen Toyota 4Runner (Model Years: 2010-2024).  Designed with precision and durability in mind, this custom-fit bracket simplifies installation, saving you time and effort while keeping your module organized and protected. Constructed from high-quality materials, this mount ensures a clean, factory-like appearance and provides easy access for wiring and maintenance.  Its tailored design allows it to integrate seamlessly into the engine bay, offering a secure attachment point without compromising the vehicle's aesthetics or performance. Upgrade your Tacoma with this practical and stylish mounting solution, perfect for off-road enthusiasts and anyone looking to streamline their Switch Pros Installation. Upgrade your Tacoma with this practical and stylish mounting solution, perfect for off-road enthusiasts and anyone looking to streamline their Switch Pros Installation.

2019-2020 Toyota 4Runner (5th Gen) Fox TRD PRO Lift Kit by Westcott Designs --- Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:

• 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
• Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
• Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)

*Please note this kit comes with "flat" style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with "stepped" front lower collars. Installation video provided in the full description below.

Check-out the 2010-2024 4Runner (5th Gen) Limited with XREAS Preload Collar Lift Kit (FRONT ONLY) Westcott Designs 4Runner Limited with XREAS Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2010-2024 4Runner Limited : 3” (front lift)
• Lead times for new orders vary from 2-3 weeks for black anodize finish kits

Westcott Designs 4Runner Limited with XREAS preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2010-'24 4runner Limited : 3” (front lift) and 1.25” (rear lift)

*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs NEW TRD PRO 4Runner 2” (FRONT ONLY) lift kit for the 2021-'24 model years. This kit is designed to give you an additional 2” front only lift rather than our standard 1.5” lift. The intention of this kit is to enable you to either run a larger tire (Up to a 285/75R17) or to help correct the ride height of your TRD PRO if you add additional front-end weight with a bumper and/or winch. *If you are looking to use this kit to lift your 4Runner to run the larger tire options, you will need to run a 2” rear spring so the vehicle will sit correctly front to rear. We use and have had a lot of luck with either Icon (#52700) or OME (#2895) springs. All Westcott Designs products are proudly manufactured in-house to the highest specifications. All our preload collar lift kits are CNC machined out of billet aluminum and are hard anodized black or are available in raw aluminum finish as well. This kit provides the following lifts:

• 2021-'24 4Runner: 2” (front lift only)

LEARN MORE HERE  https://www.youtube.com/watch?v=yJn91bQHE2c

Westcott Designs Awning Brackets, designed to allow you to mount your awning to your Westcott Designs roof rack. The bracket mounting holes measure 2" center to center and fit all the popular standard awnings from companies such as: ARB, CVT, Ironman, Darche and more. All brackets are made out of mild steel, laser cut, hand welded and powder coated black for a strong, durable and long lasting finish. Sold in pairs and include complete hardware. Made In U.S.A. *They do not fit 180 or 270 degree awnings nor do they fit with our optional floor inserts.

Westcott Designs 4th Gen (2003-'09) 4Runner rear hatch ladder. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! *Please note this ladder does NOT fit rear hatches with the optional factory spoiler* Installation Instructions How strong is our ladder? Click to see!

• Signature bottle opener
• Precision laser cut and welded top plate
• All extrude honed step system
• All black stainless hardware
• Fully Assembled
• FREE Shipping (Within the continental United States)
• Due to high volume of orders, new orders ship within 2-3-weeks of date of order placed. 

*Note; with the additional weight of our ladder and depending on both how old your rear factory struts are and the climate you are in, we recommend upgrading your rear hatch struts to a pair of heavy duty ones. We have had good luck with these ones here in addition to other offerings out on the market.*

Full Length Lo-Pro Roof Rack

Westcott Designs full length lo-pro roof rack for the popular 2003-2009 4^th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately.

• No cut out visor (plain)
• Single row 40" (Standard) light bar cut out
• Single row 42" (Rigid Adapt or similar) light bar cut out
• Single row 44" (Cali-Raised or similar) light bar cut out
• (10) light 4” cut out (Baja Designs Squadron, Rigid 360 Series or similar)
• (6) light 6” cut out (Baja Designs LP6, Rigid 6" or similar)
• Signature bottle openers
• Currently 4-6 week production lead time