• Westcott Designs Tacoma SR5/SR preload collar lift kit. This kit is designed for the 2004-’22 Tacoma SR5/SR with the black body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2004-’22 Tacoma SR5/SR: 3” (front lift) and 1″ (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View
  • Westcott Designs Tundra TRD Sport preload collar lift kit. This kit is designed for the 2008-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35″ tall tire*  It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    *Front bumper relocation kit and additional clearancing required to run a 35″ tire. Suggested tire is a 295/70R18.

    This kit provides the following lift:

    • 2008-2021 Tundra TRD Sport: 3” (front lift) and 1″ (rear lift)
    Select options
    Details Quick View
  • Westcott Designs Tundra TRD Off-Road preload collar lift kit. This kit is designed for the 2008-21’ Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35″ tall tire*  It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    *Front bumper relocation kit and additional clearancing required to run a 35″ tire. Suggested tire is a 295/70R18.

    This kit provides the following lift:

    • 2008-2021 Tundra TRD Off-Road: 3” (front lift) and 1″ (rear lift)
    Select options
    Details Quick View
  • Westcott Designs Tacoma TRD Sport preload collar lift kit. This kit is designed for the 2004-’22 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2004-’22 Tacoma TRD Sport: 3” (front lift) and 1″ (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View
  • Westcott Designs Tacoma TRD Off-Road preload collar lift kit. This kit is designed for the 2016-22’ Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2016-22′ Tacoma TRD Off-Road: 3” (front lift) and 1.00” (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View
  • *Verified to fit 2022 model year*

    This is for a Factory Fox TRD PRO, exclusively for the 2020-22′ Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 2020-22′ Tacoma: 1.5” (front lift) and 1” (rear lift)
    • Lead times for new orders vary from 3-4 weeks for raw finish kits and up to 6-7 weeks for black anodize finish kits
    Select options
    Details Quick View
  • Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing.  This is not your typical spacer lift that you hear horror stories about.  Our kit will not limit your suspension or bottom out prematurely.  It works the same way a coil over works just without being adjustable.  You will still retain the factory suspension geometry.  Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible.  We then hard anodized them to make them look better than factory.  With our kit you don’t have to max out your 5100 and can retain a great ride.  We make everything in house to make sure our quality is at the level our customers deserve.

    This kit provides the following lifts:

    • 4Runner: 3” (front lift) and 1.25” (rear lift)
    • Tacoma: 3” (front lift) and 1” (rear lift)
    • Tundra: 3” (front lift) and 1” (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    Note: This listing is for our preload collar lift kit only, this kit does NOT include shocks.

    Select options
    Details Quick View
  • This is for a Bilstein TRD PRO (2015 – 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 4Runner (2015 – 2018): 1.5” (front lift) and 1.25” (rear lift)
    • Tacoma (2015 – 2016): 1.5” (front lift) and 1” (rear lift)
    • Tundra (2015 – 2017): 1.5” (front lift) and 1” (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View
  • Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear.

    This kit provides the following lifts:

    • 4Runner (2019-2020*): 1.5” (front lift) 1.25″ (rear lift)
    • Tacoma (2017-2019): 1.5” (front lift) 1.0″ (rear lift)
    • Tundra (2018-2021): 1.5” (front lift) 1.0″ (rear lift)
    • Lead times for new orders vary from 3-4 weeks for raw finish kits and up to 6-7 weeks for black anodize finish kits

    *Please note this kit comes with “flat” style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with “stepped” front lower collars.

    Installation video provided in the full description below.

    Select options
    Details Quick View
  • Westcott Designs Tacoma SR5/SR Front Only preload collar lift kit. This kit is designed for the 2004-’22 Tacoma SR5/SR with the black body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2004-’22 Tacoma SR5/SR: 3” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View
  • Westcott Designs Tundra TRD Sport FRONT ONLY preload collar lift kit. This kit is designed for the 2008-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35″ tall tire*  The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    *Front bumper relocation kit and additional clearancing required to run a 35″ tire. Suggested tire is a 295/70R18.

    This kit provides the following lift:

    • 2008-2021 Tundra TRD Sport: 3” (front lift)
    Select options
    Details Quick View
  • Westcott Designs Tundra TRD Off-Road FRONT ONLY preload collar lift kit. This kit is designed for the 2008-21’ Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35″ tall tire*  The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    *Front bumper relocation kit and additional clearancing required to run a 35″ tire. Suggested tire is a 295/70R18.

    This kit provides the following lift:

    • 2008-2021 Tundra TRD Off-Road: 3” (front lift)
    Select options
    Details Quick View
  • Westcott Designs Tacoma TRD Sport Front Only preload collar lift kit. This kit is designed for the 2004-’22Tacoma TRD Sport with the blue body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2004-’22 Tacoma TRD Sport: 3” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View
  • Westcott Designs Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-22’ Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2016-22′ Tacoma TRD Off-Road: 3” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View
  • *Verified to fit 2022 model year*

    This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-22′ Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 2020-22′ Tacoma: 1.5” (front lift)
    • Lead times for new orders vary from 3-4 weeks for raw finish kits and up to 6-7 weeks for black anodize finish kits
    Select options
    Details Quick View
  • Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing.  This is not your typical spacer lift that you hear horror stories about.  Our kit will not limit your suspension or bottom out prematurely.  It works the same way a coil over works just without being adjustable.  You will still retain the factory suspension geometry.  Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible.  We then hard anodized them to make them look better than factory.  With our kit you don’t have to max out your 5100 and can retain a great ride.  We make everything in house to make sure our quality is at the level our customers deserve.

    This kit provides the following lifts:

    • 4Runner: 3” (FRONT ONLY)
    • Tacoma: 3” (FRONT ONLY)
    • Tundra: 3” (FRONT ONLY)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    Note: This listing is for our preload collar lift kit only, this kit does NOT include shocks.

    Select options
    Details Quick View
  • This is for a Bilstein TRD PRO (FRONT ONLY) (2015 – 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 4Runner (2015 – 2018): 1.5” (front lift) and 1.25” (rear lift)
    • Tacoma (2015 – 2016): 1.5” (front lift) and 1” (rear lift)
    • Tundra (2015 – 2017): 1.5” (front lift) and 1” (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View
  • Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences.

    This kit provides the following lifts:

    • 4Runner (2019-2020*): 1.5” (front lift)
    • Tacoma (2017-2019): 1.5” (front lift)
    • Tundra (2018-2021): 1.5” (front lift)
    • Lead times for new orders vary from 3-4 weeks for raw finish kits and up to 6-7 weeks for black anodize finish kits

    *Please note this kit comes with “flat” style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with “stepped” front lower collars.

    Installation video provided in the full description below.

    Select options
    Details Quick View

Title

Go to Top