• Westcott Designs preload collar lift kit for the all-new 2022 Toyota Tundra TRD PRO! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true “like factory” look. From the factory the new Tundra PRO comes with 1.1″ of front lift. Our Westcott kit gives you additional 2.5” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming)

    These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA!

    Please note – we have seen some new PRO model Tundra’s come from the factory with a .500″ (1/2″) lean from side to side in the rear. Please measure both sides of the rear of your truck to see if your truck leans or not before ordering your kit. We are offering the rear setup with either (2) 1.00″ rear pucks or (1) 1.00″ rear puck and (1) 1.50″ rear puck.

    Please watch this short video for more information – https://www.youtube.com/watch?v=va11ZCZKAyk

    *Patent Pending

    *No shocks are included with purchase

    This kit provides the following lifts:

    • 2022 Tundra Fox PRO suspension equipped trucks: 2.5” (front lift) and 1.00” (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    Select options
    Details Quick View
  • Westcott Designs preload collar lift kit for the all-new 2022 Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks and hard anodized black for a strong, durable finish. This kit gives you a full 3” of lift in the front and 1” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) *Now available for AVS/Air Ride and TRD Sport models, see drop down menu for options!*

    These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA!

    *Patent Pending

    *No shocks are included with any preload collar lift kits

    *Now verified to fit Hybrid models

    Note: Product photos are of prototype unit, finished product will be hard anodized black as advertised.

    This kit provides the following lifts:

    • 2022 Tundra static suspension equipped trucks: 3.0” (front lift) and 1.00” (rear lift)
    • 2022 Tundra AVS/Air Ride equipped trucks: 2.0″ (front lift) and 7/8″ (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    Select options
    Details Quick View
  • Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing.  This is not your typical spacer lift that you hear horror stories about.  Our kit will not limit your suspension or bottom out prematurely.  It works the same way a coil over works just without being adjustable.  You will still retain the factory suspension geometry.  Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible.  We then hard anodized them to make them look better than factory.  With our kit you don’t have to max out your 5100 and can retain a great ride.  We make everything in house to make sure our quality is at the level our customers deserve.

    This kit provides the following lifts:

    • 4Runner: 3” (front lift) and 1.25” (rear lift)
    • Tacoma: 3” (front lift) and 1” (rear lift)
    • Tundra: 3” (front lift) and 1” (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    Note: This listing is for our preload collar lift kit only, this kit does NOT include shocks.

    Select options
    Details Quick View
  • This is for a Bilstein TRD PRO (2015 – 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 4Runner (2015 – 2018): 1.5” (front lift) and 1.25” (rear lift)
    • Tacoma (2015 – 2016): 1.5” (front lift) and 1” (rear lift)
    • Tundra (2015 – 2017): 1.5” (front lift) and 1” (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View
  • Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear.

    This kit provides the following lifts:

    • 4Runner (2019-2020*): 1.5” (front lift) 1.25″ (rear lift)
    • Tacoma (2017-2019): 1.5” (front lift) 1.0″ (rear lift)
    • Tundra (2018-2021): 1.5” (front lift) 1.0″ (rear lift)
    • Lead times for new orders vary from 3-4 weeks for raw finish kits and up to 6-7 weeks for black anodize finish kits

    *Please note this kit comes with “flat” style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with “stepped” front lower collars.

    Installation video provided in the full description below.

    Select options
    Details Quick View
  • Westcott Designs FRONT ONLY preload collar lift kit for the all-new 2022 Toyota Tundra TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true “like factory” look. From the factory the new Tundra PRO comes with 1.1″ of front lift. Our Westcott kit gives you additional 2.5” front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming)

    These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA!

    *Patent Pending

    *No shocks are included with purchase

    This kit provides the following lifts:

    • 2022 Tundra Fox PRO suspension equipped trucks: 2.5” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    Select options
    Details Quick View
  • Westcott Designs Front Only preload collar lift kit for the all-new 2022 Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 3” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) *Now available for AVS/Air Ride and TRD Sport models, see drop down menu for options!*

    These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA!

    *Patent Pending

    *No shocks are included with any preload collar lift kits

    *Now verified to fit Hybrid models

    Note: Product photos are of prototype unit, finished product will be hard anodized black as advertised.

    This kit provides the following lifts:

    • 2022 Tundra static suspension equipped trucks: 3.0” (front lift)
    • 2022 Tundra AVS/Air Ride equipped trucks: 2.0″ (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    Select options
    Details Quick View
  • Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing.  This is not your typical spacer lift that you hear horror stories about.  Our kit will not limit your suspension or bottom out prematurely.  It works the same way a coil over works just without being adjustable.  You will still retain the factory suspension geometry.  Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible.  We then hard anodized them to make them look better than factory.  With our kit you don’t have to max out your 5100 and can retain a great ride.  We make everything in house to make sure our quality is at the level our customers deserve.

    This kit provides the following lifts:

    • 4Runner: 3” (FRONT ONLY)
    • Tacoma: 3” (FRONT ONLY)
    • Tundra: 3” (FRONT ONLY)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    Note: This listing is for our preload collar lift kit only, this kit does NOT include shocks.

    Select options
    Details Quick View
  • This is for a Bilstein TRD PRO (FRONT ONLY) (2015 – 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 4Runner (2015 – 2018): 1.5” (front lift) and 1.25” (rear lift)
    • Tacoma (2015 – 2016): 1.5” (front lift) and 1” (rear lift)
    • Tundra (2015 – 2017): 1.5” (front lift) and 1” (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View
  • Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences.

    This kit provides the following lifts:

    • 4Runner (2019-2020*): 1.5” (front lift)
    • Tacoma (2017-2019): 1.5” (front lift)
    • Tundra (2018-2021): 1.5” (front lift)
    • Lead times for new orders vary from 3-4 weeks for raw finish kits and up to 6-7 weeks for black anodize finish kits

    *Please note this kit comes with “flat” style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with “stepped” front lower collars.

    Installation video provided in the full description below.

    Select options
    Details Quick View

Title

Go to Top