- Optional floor inserts available
- Signature bottle openers
- Made in the U.S.A.
- All aluminum construction
- Choice of visor
- Lo-Pro model also available, see separate listing
- Currently 4-6 week production lead time
-
Full Length Modular Roof Rack Westcott Designs full length modular roof rack for the all-new 2023-'24 Toyota Sequoia. Designed to accommodate models with the *panoramic sunroof and for users that desire the optional floor inserts to increase your cargo space. The modular rack measures 4.5” tall to allow for full function of the standard and panoramic sunroof. Features aluminum construction for light weight (49.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 4.5” T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.
-
Out of stockThis Hitch Mount Rack comes equipped with a driver side cooler tray and work table arm and our standard passenger side tire rack. Included is a Hi-Lift jack mount (Designed with the Hi-Lift X-Treme 48" Jack), light tabs, 2" Y tire strap, auxiliary hitch receiver, and two stainless steel CNC bottle openers. The rack fits any standard 2” receiver and provides an auxiliary hitch receiver into the rack for towing. Both arms swing away from the vehicle allowing full function of the tailgate on both pickup trucks and SUV’s. Made in USA. *NO cooler included *6-8 week production lead time on all new orders*
-
CURRENT LEAD TIMES: 4-5 Weeks
2024 Toyota Land Cruiser Full Length Modular Roof Rack by Westcott Designs
Westcott Designs full length modular roof rack for the all-new 2024 Toyota Land Cruiser . This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile Visor
- Signature bottle openers
- Accepting Pre-Orders. Be the first in line!
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs FRONT ONLY preload collar lift kit for the all-new 2022-'24 Toyota Tundra TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tundra PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 2.5” front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with purchase This kit provides the following lifts:
- 2022-'24 Tundra Fox PRO suspension equipped trucks: 2.5” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Full Length Modular Roof Rack
Westcott Designs 2nd & 3rd Gen Tacoma modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”.All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Signature bottle openers
- Currently 4-6 week production lead time
-
Westcott Designs Toyota TRD PRO Grill Upper Light Bar Bracket Kit. This bracket kit allows you to mount a 20" light bar of your choice with your TRD PRO grill conversion in your new 2022-'24 Tundra or 2023-'24 Sequoia. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and comes with complete hardware for an easy installation. We have test fit and verified fitment of Rigid Industries SR series, Baja Designs S8 and Heretic brand light bars, may fit other brands as well but not verified at this time. Be sure to check out our front camera relocation bracket as well that will complete your grill conversion as needed. *Light bar not included
-
CURRENT LEAD TIMES: 6-8 WEEKS Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:
- 4Runner: 3” (FRONT ONLY)
- Tacoma: 3” (FRONT ONLY)
- Tundra: 3” (FRONT ONLY)
-
Full Length Modular Roof Rack
Westcott Designs FJ Cruiser modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations by following the contour of the roof line. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Currently 4-6 week production lead time
-
CURRENT LEAD TIMES: 6-8 Weeks Westcott Designs preload collar lift kit for the all-new 2024 Toyota Tacoma TRD PRO! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tacoma PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 1.75” of lift in the front and .75" in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with the proper offset wheel.
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs 4Runner SR5, TRD Off-Road, Trail, Venture & Premium Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2010-2024 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift)
-
Out of stockWestcott Designs rear hatch ladder for the all new 2023-'24 Toyota Sequoia! Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! SEQUOIA LADDER MOUNT TEMPLATE How strong is our ladder? Click to see!
- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 3-4 weeks of date of order placed.
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-23’ Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2016-23' Tacoma TRD Off-Road: 3” (front lift)
-
*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs NEW TRD PRO 4Runner 2” (FRONT ONLY) lift kit for the 2021-'24 model years. This kit is designed to give you an additional 2” front only lift rather than our standard 1.5” lift. The intention of this kit is to enable you to either run a larger tire (Up to a 285/75R17) or to help correct the ride height of your TRD PRO if you add additional front-end weight with a bumper and/or winch. *If you are looking to use this kit to lift your 4Runner to run the larger tire options, you will need to run a 2” rear spring so the vehicle will sit correctly front to rear. We use and have had a lot of luck with either Icon (#52700) or OME (#2895) springs. All Westcott Designs products are proudly manufactured in-house to the highest specifications. All our preload collar lift kits are CNC machined out of billet aluminum and are hard anodized black or are available in raw aluminum finish as well. This kit provides the following lifts:
- 2021-'24 4Runner: 2” (front lift only)
- Lead times for new orders vary from 2-3 weeks for black anodize finish kits
-
Installation Instructions Westcott Designs light bar brackets for the 2022-'24 Tundra & Sequoia. These brackets install behind your front grill and allow you to mount a 20" light bar of your choice. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and uses OEM hardware for a strong and solid mounting platform. We have test fit them with both the Rigid Industries SR series and Baja Designs S8 series light bars, should also accept other popular brands as well. *Light bar not included
-
Westcott Designs Tacoma SR5/SR preload collar lift kit. This kit is designed for the 2004-'23 Tacoma SR5/SR with the black body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2004-'23 Tacoma SR5/SR: 3” (front lift) and 1" (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Westcott Designs 200 Series Land Cruiser basket style modular roof rack insert. The low-profile design mounts to your existing roof rack rails and enables you to expand your cargo space for wherever your next adventure takes you. It features extrude honed cross bars, aluminum construction for light weight and steel mounting inserts for strength and to maximize load capacity. We offer the rack in standard black powder coat finish with a plain visor or in our special Heritage Edition which features bronze powder coat finish and our signature Heritage Edition engraved visor. Optional floor panel inserts sold separately. • Optional Heritage Edition Custom Color & Visor ($100 Additional) • Optional floor inserts Standard Black ($455 Additional) • Black or Bronze powder coat finish available • Currently 4-6 week production lead time
-
Westcott Designs Bed Stiffeners for 3rd Gen Tacoma. Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware for easy and clean installation.
-
Westcott Designs Modular Carrier Rack. Universal fit works in any 2” standard receiver. Features a dual side design to allow the user the ability to add on or remove equipment as needed on the go. Tire arm is available with either center mount or right side offset. Carrier arm is built out of 3"x2" box .120" wall tubing and the tire arm is built out of 1.75" diameter .120" wall DOM tubing. Tire carrier features a wheel mounted attachment system with multiple different lug patterns available to accommodate most popular patterns. Multiple options for arms that include additional left spare tire rack, optional cooler rack with worktable, grill mount and more!* Pass through receiver tow hitch, rated to tow up to 10,000lbs. and feature secure CNC cut dove tail attachment points for arm(s). All carrier racks feature our Westcott anti wobble wedge (US patent #10,661,722) receiver hitch that ensures your equipment stays put no matter what kind of abuse you put it through. *Coming soon Please confirm your lug pattern before placing your order by using this quick tool here - https://tiresize.com/bolt-pattern-finder/ If you don't see your lug pattern listed in the drop down selection please select the "custom" option and be sure to put a good phone number for your order so we can contact you for lug pattern specs needed.
- Modular Design
- Accessory mount plate
- Fits up to a 37” tall tire
- Black powder coat finish
- Made in the U.S.A.
- Lifetime Warranty
- Current lead times are 8-12 weeks on all new orders
-
Full Length Modular Roof Rack
Westcott Designs full length modular roof rack for the Lexus GX 470. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. We carefully design our racks to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile
- Aluminum Construction
- Signature bottle openers
- Currently 4-6 week production lead time
-
CURRENT LEAD TIIMES: 4-5 Weeks
Westcott Designs full length modular roof rack for the Lexus GX550. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile Visor
- PRE-ORDER the 10-Light Visor TODAY!
- Signature bottle openers
-
Full Length Lo-Pro Roof Rack
Westcott Designs full length lo-pro roof rack for the all new 2023-'24 Toyota Sequoia. This lo-profile roof rack has a sleek design that hugs your existing roof line and minimizes additional vehicle height. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 2.5"T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Not compatible with Panoramic sunroof equipped vehicles- Signature bottle openers
- Made in the U.S.A
- All aluminum construction
- Choice of visor height
- Modular model also available, see separate listing
- Currently 4-6 week production lead time
-
Westcott Designs Front Only preload collar lift kit for the 200 series Toyota Land Cruiser (2008-'21). The kit features CNC machined lower preload collars with top spacer plates that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: • 2008-'21 LC200: 3.0” (front lift)
- Raw aluminum kits ship within 4-5-weeks of date of order. Black anodized kits ship within 5-6-weeks of date of order
-
Westcott Designs Tundra TRD Off-Road preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:
- 2007-2021 Tundra TRD Off-Road: 3” (front lift) and 1" (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
CURRENT LEAD TIMES: 6-8 WEEKS --- Westcott Designs Front Only preload collar lift kit for the all-new 2023-'24 Toyota Sequoia! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 3” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA!
-
CURRENT LEAD TIMES: 4-5 WEEKS --- Westcott Designs roof rack for the all new 2024 Tacoma! New features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels.
- No cut out visor
- Single row 40-inch light bar cut out
- Rigid Adapt light bar cut out
- (10) light 4” cut out
- Signature bottle openers with or without the truck logo
- Currently 4 week production lead time
-
Westcott Designs Tundra SR5 preload collar lift kit. This kit is designed for the 2007-21’ Tundra sR5 with the standard black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:
- 2007-'21 Tundra SR5: 3” (front lift) and 1" (rear lift)
-
Westcott Designs Bed Stiffeners for the all new 2024 Tacoma! Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware including the stainless steel badging to add a little "bling" to your bed!
-
CURRENT LEAD TIMES: 6-8 WEEKS Westcott Designs 4Runner Limited with XREAS preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2010-'24 4runner Limited : 3” (front lift) and 1.25” (rear lift)
- Lead times for new orders vary from 2-3 weeks for black anodize finish kits