×
-
NEW
LEAD TIMES: 3-4 Weeks Westcott Designs rear hatch ladder for the 2024-2026 (1st Gen) INEOS Grenadier. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! -
NEW
2024+ Lexus GX550 3/4 Roof Rack by Westcott Designs
Check-out Westcott Designs 3/4 roof rack for the 2024+ Lexus GX550. Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- No cut out visor
- Signature bottle openers
- Add-on option with floor panels
-
NEW
2024+ Toyota Land Cruiser 3/4 Roof Rack by Westcott Designs
Check-out Westcott Designs 3/4 roof rack for the 2024+ Toyota Land Cruiser (LC250). Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- No cut out visor
- Signature bottle openers
- Add-on option with floor panels
-
Westcott Designs has put together an upgraded top hat made from Billet Aluminum for your 2024+ Lexus GX550. This takes your OE design to an OE+ form and function providing you with either a full billet replacement or a lift of 1" for higher clearance or leveling - your choice. -
Westcott Designs proudly introduces our upgraded Billet Aluminum Top Hat for the 2024+ Toyota Land Cruiser LC250. Designed to enhance both form and function, this OE+ upgrade takes your factory top hat to the next level—offering you superior strength, style, and performance. -
Westcott Designs has put together an upgraded top hat made from Billet Aluminum for your 2024+ 4th Gen Toyota Tacoma. This takes your OE design to an OE+ form and function providing you with either a full billet replacement or a lift of 1/2" for higher clearance or leveling - your choice. -
2025-2026 Toyota 4Runner (6th Gen) 3/4 Roof Rack by Westcott Designs
Check-out Westcott Designs 3/4 roof rack for the ALL-NEW 2025-2026 Toyota 4Runner (6th Gen). Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- No cut out visor
- Signature bottle openers
- Add-on option with floor panels
-
IN STOCK & READY TO SHIP!! - - Westcott Designs rear hatch ladder for the All-New 2025 Toyota 4Runner (6th Gen). Construction is all aluminum to keep it light weight. The uprights are double layered 3/16 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market!Westcott Designs Ladder Features
- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Westcott Designs full length rear hatch ladder for the 2021-2025 GMC Yukon. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Check-Out the ALL New 2024 Chevy 3500 Bison Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The Chevy 3500 Bison Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
2025-2026 Toyota 4Runner Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
Check-Out the ALL New 2024-2025 GMC 2500 & 3500 AT4X Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The GMC 2500 AT4X Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. This Light Bar works on the following GM trucks:
-
Check-Out the ALL New 2024 Chevy 3500 Bison AEV Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The Chevy 3500 Bison AEV Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
Westcott Designs Bed Rack for the 4th Generation Toyota Tacoma. Compatible with both short and long beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. You'll also have your choice of the new Cab Height, where you can purchase the Roof Rack Extension to create a seamless roof rack from the Tacoma Roof Rack to the Bed Rack. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in short bed and long bed configurations. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately*- Molle Panels (Short Bed or Long Bed)
- Roof Rack Extension - which pairs with the 4th Gen Tacoma Roof Rack for a seamless rack from the roof to the end of the bed. Maximizing your space for long GFC tents and other accessories.
-
Check out the 2024-2025 Lexus GX 550 REAR HATCH LADDER by Westcott Designs Westcott Designs rear hatch ladder for the All-New 2024-2025 Lexus GX 550. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Check out the 2024 TOYOTA LAND CRUISER REAR HATCH LADDER by Westcott Designs Westcott Designs rear hatch ladder for the All-New 2024 Toyota Land Cruiser. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
*Images are from a 2021-2025 GMC Yukon. The Westcott Designs Full-Length Rear Hatch Ladder works on both the 2021-2025 Chevy Tahoe & GMC Yukon Westcott Designs full length rear hatch ladder for the 2021-2025 Chevy Tahoe. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Out of stock
Check-Out the ALL New 2024 Chevy 2500 Bison AEV Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The Chevy 2500 Bison AEV Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength.
-
Check-Out the ALL New 2024-2025 GMC 2500 AT4X Bumper Light Bar (AEV Edition) from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The GMC 2500 AT4x (AEV Edition) Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
2024-2026 Toyota Land Cruiser Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
Check out the 2024-2026 Lexus GX 550 Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
Westcott Designs full length rear hatch ladder for the 2007-'21 Toyota 200 Series Land Cruiser. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 3-4 weeks of date of order placed.
-
Westcott Designs rock sliders for the 2010-'24 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. -
Westcott Designs NO KICKOUT rock sliders for the 2010-'24 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. -
2024-2026 Toyota Tacoma Preload Collar Lift Kit - TRD Off-Road, TRD Sport & SR5
Westcott Designs preload collar lift kit for the all-new 2024-2026 Toyota Tacoma! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with the proper offset wheel. -
2024-2026 Toyota Tacoma TRD PRO Preload Collar Lift Kit by Westcott Designs Westcott Designs preload collar lift kit for the all-new 2024-2026 Toyota Tacoma TRD PRO! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tacoma PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 1.75” of lift in the front and .75" in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with the proper offset wheel. -
Westcott Designs 4Runner Limited with XREAS preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-'24 4runner Limited : 3” (front lift) and 1.25” (rear lift)
-
Westcott Designs TRD preload collar lift kit for the 2022-2026 Toyota Tundra! This conversion kit will fit ALL standard rear coil suspension model Tundra's (SR, SR5, Limited, Platinum & TRD Off-Road). This kit is designed to be used with the optional TRD shocks (#PTR13-34330) and struts (#PTR13-34310) that are available directly from Toyota. There is no need to spend thousands of dollars on this kit from your dealer when you can purchase it here for a fraction of the cost. We offer this kit in (2) different configurations, you can purchase it as a complete kit with shocks or you can purchase just our preload collar kit and source the shocks on your own from your local dealer. This kit features CNC machined lower preload collars, top shim plates, rear billet lift pucks and a brake like relocation bracket. These kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. These kits give you a true 3" of front lift and 1.5" of rear lift and ride better than factory! All kits come with complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory if not better ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset and our Westcott Designs Tundra Tire Clearance Kit) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Please note, you will need the Toyota TRD red axles in order to make this kit work, those part numbers are 43420-0C020 (Left) and 43410-0C020 (Right) which are available from your local Toyota dealer. *Patent Pending This kit provides the following lift:- 2022-'24 Tundra TRD suspension equipped trucks: 3.0” (front lift) and 1.50” (rear lift)
- This kit fits ALL standard rear coil suspension model Tundra's (SR, SR5, Limited, Platinum, & TRD Off-Road)
-
Westcott Designs 4th Gen (2003-'09) 4Runner rear hatch ladder. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! *Please note this ladder does NOT fit rear hatches with the optional factory spoiler* Installation Instructions How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 2-3-weeks of date of order placed.
-
Westcott Designs roof rack floor inserts for 2021-2025 GMC Yukon modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. -
Westcott Designs preload collar lift kit for the all-new 2023-2026 Toyota Sequoia! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks and hard anodized black for a strong, durable finish. This kit gives you 2.5” of lift in the front and 1” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! Note: These new Sequoia's share a lot of the same suspension components as the new platform Tundra. If you need help figuring out what kit fits your specific model, please watch the link below to learn how to identify what kit you need. WHAT KIT DO I BUY? *Watch This Video* *Patent Pending *No shocks are included with any preload collar lift kits This kit provides the following lifts:- 2023-2026 Sequoia static suspension equipped trucks: 2.5” (front lift) and 1.00” (rear lift)
- 2023-2026 Sequoia AVS/Air Ride equipped trucks: 2.0" (front lift) and 7/8" (rear lift)
- WHAT KIT DO I BUY? *Watch This Video*
-
Westcott Designs roof rack floor inserts for 2023-2026 Toyota Sequoia modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. *Not compatible with the Lo-Pro model roof rack -
2023-2025 Toyota Sequoia Rear Hatch Ladder by Westcott Designs Westcott Designs rear hatch ladder for the all new 2023-2025 Toyota Sequoia! Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! SEQUOIA LADDER MOUNT TEMPLATE How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 3-4 weeks of date of order placed.
-
Westcott Designs preload collar lift kit for the all-new 2023-2026 Toyota Sequoia TRD PRO! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. Our Westcott kit gives you additional 3” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset along with our clearance kit and BMC) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! -
Westcott Designs preload collar lift kit for the all-new 2022-2026 Toyota Tundra TRD PRO & 1794 Limited equipped with Fox shocks! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tundra PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 2.5” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! -
Westcott Designs preload collar lift kit for the all-new 2022-2025 Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks and hard anodized black for a strong, durable finish. This kit gives you 2.5” of lift in the front and 1” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) *Now available for AVS/Air Ride and TRD Sport models, see drop down menu for options!* -
Westcott Designs NO KICK OUT rock sliders for 2010-2024 5th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. These No Kick Out sliders have a sleeker design that follow the body line of the vehicle more and give it a nice smooth look. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) -
Westcott Designs Bed Rack for 2nd and 3rd Generation Toyota Tacoma. Compatible with both 5.5’ and 6.5’ length beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36", 40" and 42" lengths depending on your particular needs. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately *4-6 week lead time on all new orders currently *Short bed trucks only accept a 36" Molle Panel* -
Westcott Designs roof rack floor inserts for 200 Series Land Cruiser basket style roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs basket roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA -
2008-2021 Westcott Designs preload collar lift kit for the 200 series Toyota Land Cruiser. The kit features CNC machined lower preload collars, top spacer plates, and rear billet lift pucks that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: • 2008-2021 LC200: 3.0” (front lift) and 1.25” (rear lift) -
Westcott Designs rock sliders for the 2003-09 4th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. Options:- Raw HREW, MIG Welded - $725 a set.
- Raw DOM, MIG Welded - $849 a set.
- Raw DOM, TIG Welded - $1049 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Due to high volume of orders expect a 4-5-week lead time on all new orders.
-
Westcott Designs rock sliders for the 2010-'24 5th generation 4runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) -
Westcott Designs rock sliders for FJ Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. Options:- Raw HREW, MIG Welded - $725 a set.
- Raw DOM, MIG Welded - $849 a set.
- Raw DOM, TIG Welded - $1049 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around)
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Currently experiencing around an 4-5-week lead time on all new slider orders.
-
Westcott Designs roof rack floor inserts for 5th gen 4Runner modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. *Not compatible with the lo-pro model -
Westcott Designs 5th Gen (2010-'24) 4Runner rear hatch ladder. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 2-3-weeks of date of order placed.
-
This is for a Factory Fox TRD PRO, exclusively for the 2020-2022 Toyota Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop. This kit provides the following lifts:- 2020-2022 Toyota Sequoia: 1.5” (front lift) and 1” (rear lift)
-
Our high quality Wheel Stands allow you to adjust the suspension with ease. With these stands you can string, square, check angles and make all the necessary adjustments. This listing is for a pair of stands. -
Rigid Industries Chase Brake Light, Turn Signal And Back Up W/Harness