Toll Free: (888) 574-5270 | Local: (480) 750-8747
Back to dashboard

Search Results for:

  • 2022-’23 Toyota Tundra TRD PRO Preload Collar Lift Kit – FRONT ONLY

    $349.95 – $399.95

    Westcott Designs FRONT ONLY preload collar lift kit for the all-new 2022-’23 Toyota Tundra TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true “like factory” look. From the factory the new Tundra PRO comes with 1.1″ of front lift. Our Westcott kit gives you additional 2.5” front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming)

    These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA!

    *Patent Pending

    *No shocks are included with purchase

    This kit provides the following lifts:

    • 2022-’23 Tundra Fox PRO suspension equipped trucks: 2.5” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    Select options
    Details Quick View

  • 2023 Toyota Sequoia FRONT ONLY Preload Collar Lift Kit – SR5, Limited, Platinum, TRD Off-Road

    $325.95 – $375.95

    Westcott Designs Front Only preload collar lift kit for the all-new 2023 Toyota Sequoia! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 3” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop.

    These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA!

    Note: These new Sequoia’s share a lot of the same suspension components as the new platform Tundra. If you need help figuring out what kit fits your specific model, please watch the link below to learn how to identify what kit you need.

    WHAT KIT DO I BUY? *Watch This Video*

    *Patent Pending

    *No shocks are included with any preload collar lift kits

    *Not compatible with AVS equipped rear trucks, see complete kit listing for purchase

    This kit provides the following lifts:

    • 2023 Sequoia static suspension equipped trucks: 3.0” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View

  • 2022-’23 Toyota Tundra FRONT ONLY Preload Collar Lift Kit – SR5, Limited, Platinum, 1794, Hybrid, TRD Sport, TRD Off-Road

    $325.95 – $375.95

    Westcott Designs Front Only preload collar lift kit for the all-new 2022-’23 Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 3” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming)

    These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA!

    *Patent Pending

    *No shocks are included with any preload collar lift kits

    *Not compatible with AVS equipped rear trucks, see complete kit listing for purchase

    This kit provides the following lifts:

    • 2022-’23 Tundra static suspension equipped trucks: 3.0” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    WHAT KIT DO I BUY? *Watch This Video*

    Select options
    Details Quick View

  • Land Cruiser (200 Series) Preload Collar Lift Kit – Front Only

    $325.95 – $375.95

    Westcott Designs Front Only preload collar lift kit for the 200 series Toyota Land Cruiser (2008-’21). The kit features CNC machined lower preload collars with top spacer plates that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming.

    *1.25″ wheel spacers required

    This kit provides the following lifts:

    • 2008-’21 LC200: 3.0” (front lift)

    • Raw aluminum kits ship within 1-2-weeks of date of order. Black anodized kits ship within 2-3-weeks of date of order
    Select options
    Details Quick View

  • 07-21′ Toyota Tundra SR5 FRONT ONLY Preload Collar Lift Kit

    $299.95 – $349.95

    Westcott Designs Tundra SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra SR5 with black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35″ tall tire*  The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    *Front bumper relocation kit and additional clearancing required to run a 35″ tire. Suggested tire is a 295/70R18.

    This kit provides the following lift:

    • 2007-’21 Tundra SR5: 3” (front lift)
    Select options
    Details Quick View

  • Toyota Tacoma SR5/SR Preload Collar Lift Kit (FRONT ONLY)

    $299.95 – $349.95

    Westcott Designs Tacoma SR5/SR Front Only preload collar lift kit. This kit is designed for the 2004-’23 Tacoma SR5/SR with the black body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2004-’23 Tacoma SR5/SR: 3” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View

  • 07-21′ Toyota Tundra TRD Sport FRONT ONLY Preload Collar Lift Kit

    $299.95 – $349.95

    Westcott Designs Tundra TRD Sport FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35″ tall tire*  The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    *Front bumper relocation kit and additional clearancing required to run a 35″ tire. Suggested tire is a 295/70R18.

    This kit provides the following lift:

    • 2007-’21 Tundra TRD Sport: 3” (front lift)
    Select options
    Details Quick View

  • 07-21′ Toyota Tundra TRD Off-Road FRONT ONLY Preload Collar Lift Kit

    $299.95 – $349.95

    Westcott Designs Tundra TRD Off-Road FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35″ tall tire*  The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    *Front bumper relocation kit and additional clearancing required to run a 35″ tire. Suggested tire is a 295/70R18.

    This kit provides the following lift:

    • 2007-’21 Tundra TRD Off-Road: 3” (front lift)
    Select options
    Details Quick View

  • Toyota Tacoma TRD Sport Preload Collar Lift Kit (FRONT ONLY)

    $299.95 – $349.95

    Westcott Designs Tacoma TRD Sport Front Only preload collar lift kit. This kit is designed for the 2004-’23 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2004-’23 Tacoma TRD Sport: 3” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View

  • Toyota Tacoma TRD Off-Road Preload Collar Lift Kit (FRONT ONLY)

    $299.95 – $349.95

    Westcott Designs Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-23’ Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2016-23′ Tacoma TRD Off-Road: 3” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View

  • 2021-’23 4Runner Fox TRD PRO Lift Kit (FRONT ONLY)

    $299.95 – $349.95

    *VERIFIED TO FIT 2023 MODEL YEAR*

    Westcott Designs 4Runner TRD PRO FOX (FRONT ONLY) lift kit for the 2021-’23 model years. The suspension has been redesigned and re-valved for 2021-’23 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load.

    This kit provides the following lifts:

    • 2021-’23 4runner: 1.6-1.7” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View

  • 2020-23′ Tacoma Fox TRD PRO Lift Kit (FRONT ONLY)

    $299.95 – $349.95

    This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-23′ Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 2020-23′ Tacoma: 1.5” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and up to 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View

  • 2020-22′ Sequoia Fox TRD PRO Lift Kit (FRONT ONLY)

    $349.95

    This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-22′ Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop.

    This kit provides the following lifts:

    • 2020-22′ Sequoia: 1.5” (front lift)
    • Lead times for new orders vary from 1-2 weeks
    Add to cart
    Details Quick View

  • Bilstein 5100 Preload Collar Lift Kit (FRONT ONLY)

    $279.95 – $329.95

    Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing.  This is not your typical spacer lift that you hear horror stories about.  Our kit will not limit your suspension or bottom out prematurely.  It works the same way a coil over works just without being adjustable.  You will still retain the factory suspension geometry.  Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible.  We then hard anodized them to make them look better than factory.  With our kit you don’t have to max out your 5100 and can retain a great ride.  We make everything in house to make sure our quality is at the level our customers deserve.

    This kit provides the following lifts:

    • 4Runner: 3” (FRONT ONLY)
    • Tacoma: 3” (FRONT ONLY)
    • Tundra: 3” (FRONT ONLY)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits

    Note: This listing is for our preload collar lift kit only, this kit does NOT include shocks.

    Select options
    Details Quick View

  • Bilstein TRD PRO Lift Kit (FRONT ONLY) – Tacoma, 4Runner & Tundra

    $279.95 – $329.95

    This is for a Bilstein TRD PRO (FRONT ONLY) (2015 – 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 4Runner (2015 – 2018): 1.5” (front lift) and 1.25” (rear lift)
    • Tacoma (2015 – 2016): 1.5” (front lift) and 1” (rear lift)
    • Tundra (2015 – 2017): 1.5” (front lift) and 1” (rear lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
    Select options
    Details Quick View

  • Fox TRD PRO Lift Kit (FRONT ONLY) – ’17-’19 Tacoma, ’19-’20 4Runner & ’18-’21 Tundra

    $279.95 – $329.95

    Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences.

    This kit provides the following lifts:

    • 4Runner (2019-2020*): 1.5” (front lift)
    • Tacoma (2017-2019): 1.5” (front lift)
    • Tundra (2018-2021): 1.5” (front lift)
    • Lead times for new orders vary from 1-2 weeks for raw finish kits and around 2-3 weeks for black anodize finish kits

    *Please note this kit comes with “flat” style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with “stepped” front lower collars.

    Installation video provided in the full description below.

    Select options
    Details Quick View

Title

Close Sliding Bar Area

Featured Products

Recent Posts

View All Blogs
Go to Top