shopping

2023-2026 Toyota Sequoia Full Length Lo-Pro Roof Rack

Westcott Designs™ full length lo-pro roof rack for the all new 2023-2026 Toyota Sequoia. This lo-profile roof rack has a sleek design that hugs your existing roof line and minimizes additional vehicle height. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 2.5"T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Not compatible with Panoramic sunroof equipped vehicles  

Westcott Designs™ Tundra SR5 preload collar lift kit is designed for the 2007-2021 Toyota Tundra sR5 with the standard black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire*  It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-2021 Tundra SR5: 3” (front lift) and 1" (rear lift)

Check Out the 2024-2026 Toyota Land Cruiser Ditch Light Brackets by Westcott Designs

Check-out Westcott Designs’ A-pillar ditch light brackets for the All-New 2024-2026 Toyota Land Cruiser!  CAD designed, laser cut & bent, and powder coated black for a durable finish. Easy install and uses OEM mounting hardware. This unique design placed the light right next to your side-view mirrors, making it seamlessly integrate into the design of your Land Cruiser and allow the light to be where you need it without obstructing your view in any way. *Lights not included, sold separately.  Designed for the Rigid Industries 4" 360 Series Light.   **IMPORTANT: Download the attached Install Template PDF below.  This will give you the exact drill locations to install your Westcott Designs 2024 Toyota Land Cruiser Ditch Light Brackets.

Westcott Designs License Plate Mount for Westcott Designs Hitch Mount Racks with the following part numbers: 10001BK 10002BK-R 10002BK-T 10003BK-R 10003BK-T 10004BK **Does NOT fit the Single Tire Carrier rack, only fits the original dual arm hitch mount racks** Product Dimensions (in): 12 x 9.5

Westcott Designs™ Rock Sliders for the 2010-2024 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable.

Westcott Designs 2007-2021 Tundra TRD Off-Road preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After installing your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-2021 Tundra TRD Off-Road: 3” (front lift) and 1" (rear lift)

2022-2026 Toyota Tundra Factory Air Bag Suspension Delete Kit - - Now you can upgrade your Toyota factory Air Ride suspension for the 2022-2026 Tundra or 2023-2026 Sequoia with Westcott Design’s Air Bag Delete kit!  

Check-Out the ALL New 2024-2026 GMC 2500 AT4X Bumper Light Bar (AEV Edition) from Westcott Designs™! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders.  The GMC 2500 AT4x (AEV Edition) Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength.

2024-2026 Toyota Tacoma (4th Gen) Rear Lift Pucks

Check-out the Westcott Designs rear lift pucks for the new 2024-2026 Tacoma that give you 3/4" of rear only lift. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. Price per pair. *Do NOT attempt to stack pucks for more lift, you will damage other rear suspension components and it is extremely unsafe*