shopping

Westcott Designs Tundra 2007-2021 SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra SR5 with black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After installing you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-'21 Tundra SR5: 3” (front lift)

Westcott Designs™ Tundra SR5 preload collar lift kit is designed for the 2007-2021 Toyota Tundra sR5 with the standard black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire*  It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-2021 Tundra SR5: 3” (front lift) and 1" (rear lift)

Westcott Designs™ Bed Rack the 2022-2026 Toyota Tundra. Compatible with both 5.5’ and 6.6’ length beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36", 40" and 42" lengths to accommodate all configurations of accessories and bed lengths. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately

2022-2026 Toyota Tundra No Kickout Rock Sliders Westcott Designs no kickout rock sliders for the 2022-2026 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable.

2023-2026 Toyota Sequoia Full Length Lo-Pro Roof Rack

Westcott Designs™ full length lo-pro roof rack for the all new 2023-2026 Toyota Sequoia. This lo-profile roof rack has a sleek design that hugs your existing roof line and minimizes additional vehicle height. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 2.5"T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Not compatible with Panoramic sunroof equipped vehicles  

2023-2026 Toyota Sequoia Rear Hatch Ladder by Westcott Designs Westcott Designs rear hatch ladder for the all new 2023-2026 Toyota Sequoia! Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! SEQUOIA LADDER MOUNT TEMPLATE How strong is our ladder? Click to see!

• Signature bottle opener
• Precision laser cut and welded top plate
• All extrude honed step system
• All black stainless hardware
• Fully Assembled
• FREE Shipping (Within the continental United States)
• Due to high volume of orders, new orders ship within 3-4 weeks of date of order placed. 

https://www.youtube.com/watch?v=vV8yYj4zXGo

Westcott Designs rock sliders for the all new 2023-2026 Toyota Sequoia. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable.

Westcott Designs FRONT ONLY preload collar lift kit for the 2023-2026 Toyota Sequoia TRD Off-Road! This kit features CNC machined lower preload collars. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look.  Our Westcott kit gives you additional 2” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This lift kit is designed to level the stance of your ride front to rear and allows you run up to a 295/70R18 (34" tall) tire with minor trimming. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with any preload collar lift kits This kit provides the following lifts:

• 2023+ Sequoia TRD Off-Road: 2” (front lift)

Westcott Designs Front Leveling preload collar lift kit for the all-new 2023-2026 Toyota Sequoia TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look.  Our Westcott kit gives you additional 2” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This lift kit is designed to level the stance of your ride front to rear and allows you run up to a 35" tire with minor trimming. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! https://www.youtube.com/watch?v=r3qOlRBxZDg