shopping

Westcott Designs Bed Rack for 2^nd and 3^rd Generation Toyota Tacoma. Compatible with both 5.5’ and 6.5’ length beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36" and 42" lengths depending on your particular needs. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately *Short bed trucks only accept a 36" Molle Panel*

Westcott Designs universal shock reservoir brackets. Enables to re-locate your remote shock reservoir as needed for clearance and/or ease of access to the adjusters. Made out of mild steel, laser cut and precisely bent. Powder coated in a durable textured black finish. Made in the U.S.A. and come with a Lifetime Warranty.

• Compatible with most remote reservoirs (Fox, King, Bilstein)
• Durable Powder Coat Finish
• Made in the U.S.A
• Lifetime Warranty

Westcott Designs Tundra 2007-2021 SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra SR5 with black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After installing you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-'21 Tundra SR5: 3” (front lift)

Mild Steel Light Mounting tab. Weld on, 0.125 inch, 11 gauge, 3.175mm.

Westcott Designs 200 Series Land Cruiser full length roof rack. The low-profile design enables you to expand your cargo space for wherever your next adventure takes you. We carefully designed our roof rack to minimize wind noise at all speeds. The rack features extrude honed cross bars, aluminum construction for light weight and steel mounting inserts for strength and to maximize load capacity. Includes full hardware for an easy, no-drill install, comes powder coated black for a long lasting, durable finish, and of course a pair of our signature, Westcott Designs stainless steel bottle openers! Proudly made in the U.S.A.

• • Low profile design
  • No-drill install
  • Lightweight
  • Durable finish
  • Made in the U.S.A.

Westcott Designs NO KICKOUT rock sliders for the 2010-2024 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable.

2024+ Lexus GX550 3/4 Roof Rack by Westcott Designs

Check-out Westcott Designs 3/4 roof rack for the 2024+ Lexus GX550. Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.

• No cut out visor
• Signature bottle openers
• Add-on option with floor panels

Tubing End Cap with Integrated Bottle Opener. Made out of stainless steel, CNC machined to exacting tolerances for a perfect fit every time. Designed for 1.75" x .120" round tubing. The outside diameter of the insert is 1.505". This is designed to be plug welded in.

Westcott Designs Tacoma TRD Sport Front Only preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2016-2023 Tacoma TRD Sport: 3” (front lift)