shopping

Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2024-2026 Toyota Tacoma (4th Gen). Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for.

Westcott Designs Tundra TRD Off-Road FRONT ONLY preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After installing you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-2021 Tundra TRD Off-Road: 3” (front lift)

2024-2026 Lexus GX550 Westcott Designs 1/2 inch FRONT Top Spacer

Dial in the perfect stance for your Lexus GX550 with the Westcott Designs 1/2” Top Spacer. Designed to provide an additional 1/2 inch of front-end lift, this precision-machined aluminum spacer helps reduce factory rake for a more leveled and aggressive look. Ideal for those looking to fine-tune their suspension setup without compromising ride quality, each spacer is CNC-machined from high-grade aluminum and offered in your choice of a sleek black anodized finish or classic raw aluminum. Whether you’re compensating for added front-end weight or just want a more balanced stance, the Westcott 1/2” Spacer is the clean, simple solution. Be sure to check-out our YouTube Channel to learn more about Westcott Designs products and all the new products we'll be releasing for the 6th Gen 2025-2026 Toyota 4Runner! Westcott Designs YouTube Channel

Westcott Designs™ Pre-Runner Front Bumper & Skid Plate Package for 3rd Gen (2022–2026) Toyota Tundra

Upgrade your 2022–2026 Toyota Tundra with the Westcott Designs Pre-Runner Front Bumper and Skid Plate Combo—engineered for aggressive off-road performance, trail protection, and a race-inspired pre-runner look.

Designed specifically for the 3rd Generation Toyota Tundra, this bumper and skid plate system delivers the strength, clearance, and durability serious off-roaders demand—without sacrificing daily drivability or factory fitment or sacrificing the front and rear parking sensors.

This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-2022 Toyota Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop. This kit provides the following lifts:

• 2020-2022 Toyota Sequoia: 1.5” (front lift)

LEAD TIME: 3-4 Weeks Westcott Designs has put together an upgraded top hat made from Billet Aluminum for your 2024+ 4th Gen Toyota Tacoma. This takes your OE design to an OE+ form and function providing you with either a full billet replacement or a lift of 1/2" for higher clearance or leveling - your choice.

Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:

• 4Runner (2019-2020*): 1.5” (front lift)
• Tacoma (2017-2019): 1.5” (front lift)
• Tundra (2018-2021): 1.5” (front lift)

*Please note this kit comes with "flat" style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with "stepped" front lower collars. Installation video provided in the full description below.