Your Ultimate Shopping Destination for Custom Truck Accessories

Westcott Designs 4Runner Limited with XREAS preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2010-'24 4runner Limited : 3” (front lift) and 1.25” (rear lift)

Westcott Designs 2010-2024 4Runner SR5, TRD Off-Road, Trail, Venture & Premium Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2010-2024 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift)

2019-2020 Toyota 4Runner (5th Gen) Fox TRD PRO Lift Kit by Westcott Designs --- Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:

• 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
• Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
• Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)

*Please note this kit comes with "flat" style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with "stepped" front lower collars. Installation video provided in the full description below.

Check out the ALL-NEW 6th Gen 2025+ Toyota 4Runner FRONT ONLY Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset.

2025-2026 Toyota 4Runner (6th Gen) Full-Length Modular Roof Rack by Westcott Designs

Check-out Westcott Designs full length modular roof rack for the 2025-2026 Toyota 4Runner (6th Gen). Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.

Check out the Westcott Designs molle panels for the 2010-2024 (5th Gen) Toyota 4Runner.  You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland Set-up.

 2025-2026 Toyota 4Runner (6th Gen) 3/4 Roof Rack by Westcott Designs

Check-out Westcott Designs 3/4 roof rack for the ALL-NEW 2025-2026 Toyota 4Runner (6th Gen). Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.

• No cut out visor
• Signature bottle openers
• Add-on option with floor panels

Westcott Designs rear lift pucks for 4th & 5th Generation Toyota 4Runner. Gives you 1.25" of rear lift only on standard rear coil suspension equipped 4Runner. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty.

Full Length Lo-Pro Roof Rack

Westcott Designs™ full length lo-pro roof rack for the popular 2003-2009 4^th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately.