shopping

2019-2020 Toyota 4Runner (5th Gen) Fox TRD PRO Lift Kit by Westcott Designs --- Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:

• 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
• Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
• Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)

*Please note this kit comes with "flat" style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with "stepped" front lower collars. Installation video provided in the full description below.

Check-out the 2010-2024 4Runner (5th Gen) Limited with XREAS Preload Collar Lift Kit (FRONT ONLY) Westcott Designs 4Runner Limited with XREAS Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2010-2024 4Runner Limited : 3” (front lift)
• Lead times for new orders vary from 2-3 weeks for black anodize finish kits

Westcott Designs 4Runner Limited with XREAS preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2010-'24 4runner Limited : 3” (front lift) and 1.25” (rear lift)

*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs NEW TRD PRO 4Runner 2” (FRONT ONLY) lift kit for the 2021-'24 model years. This kit is designed to give you an additional 2” front only lift rather than our standard 1.5” lift. The intention of this kit is to enable you to either run a larger tire (Up to a 285/75R17) or to help correct the ride height of your TRD PRO if you add additional front-end weight with a bumper and/or winch. *If you are looking to use this kit to lift your 4Runner to run the larger tire options, you will need to run a 2” rear spring so the vehicle will sit correctly front to rear. We use and have had a lot of luck with either Icon (#52700) or OME (#2895) springs. All Westcott Designs products are proudly manufactured in-house to the highest specifications. All our preload collar lift kits are CNC machined out of billet aluminum and are hard anodized black or are available in raw aluminum finish as well. This kit provides the following lifts:

• 2021-'24 4Runner: 2” (front lift only)

LEARN MORE HERE  https://www.youtube.com/watch?v=yJn91bQHE2c

Westcott Designs Awning Brackets for Westcott Designs Roof Racks - Will also fit ARB, CVT, Ironman, Darche and other roof racks as well. IMPORTANT INFORMATION BELOW: 4th Gen Tacoma Westcott Designs Roof Racks have slightly thicker side rails. Please select the 4th Gen Tacoma in the drop down above to ensure you get the correct bracket. Please Choose from the Following Bracket Options:

1. 90 Degree Awning Brackets
2. 180–270 Degree Awning Brackets
3. 4th Gen Tacoma Westcott Designs Roof Rack 90 Degree Awning Brackets
4. 4th Gen Tacoma Westcott Designs Roof Rack 180/270 Degree Awning Brackets

The bracket mounting holes measure 2" center to center and fit all the popular standard awnings from companies such as: ARB, CVT, Ironman, Darche and more. All brackets are made out of mild steel, laser cut, hand welded and powder coated black for a strong, durable and long lasting finish. Sold in pairs and include complete hardware. Made in U.S.A.

Westcott Designs 4th Gen (2003-'09) 4Runner rear hatch ladder. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! *Please note this ladder does NOT fit rear hatches with the optional factory spoiler* Installation Instructions How strong is our ladder? Click to see!

• Signature bottle opener
• Precision laser cut and welded top plate
• All extrude honed step system
• All black stainless hardware
• Fully Assembled
• FREE Shipping (Within the continental United States)
• Due to high volume of orders, new orders ship within 2-3-weeks of date of order placed. 

*Note; with the additional weight of our ladder and depending on both how old your rear factory struts are and the climate you are in, we recommend upgrading your rear hatch struts to a pair of heavy duty ones. We have had good luck with these ones here in addition to other offerings out on the market.*

Westcott Designs rear lift pucks for 4th & 5th Generation Toyota 4Runner. Gives you 1.25" of rear lift only on standard rear coil suspension equipped 4Runner. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty.

Westcott Designs NO KICK OUT rock sliders for 2010-2024 5^th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. These No Kick Out sliders have a sleeker design that follow the body line of the vehicle more and give it a nice smooth look. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas)    

Westcott Designs rock sliders for the 2003-09 4^th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. Options:

• Raw HREW, MIG Welded - $725 a set.
• Raw DOM, MIG Welded - $849 a set.
• Raw DOM, TIG Welded - $1049 a set.
• Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
• Traditional black powder coat (BK08) for an additional $250.00 per set.
• Due to high volume of orders expect a 4-5-week lead time on all new orders. 

Westcott Designs rock sliders are some of the nicest and highest quality rock sliders on the market. Our rock sliders are some of the lightest on the market by nearly 5lbs. per side. We build everything in house in Phoenix, AZ by some of the best welders in the country to make sure our quality is nothing but the best!  We laser cut all of our tubing and plates, CNC bend all of our tubing and fixture weld everything to make sure tolerances are the same every time. *HREW (Hot Rolled Electrically Welded) *DOM (Drawn Over Mandrel) *HRPO (Hot Rolled Pickled and Oiled)