shopping

Westcott Designs Tundra 2007-2021 SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra SR5 with black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After installing you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-'21 Tundra SR5: 3” (front lift)

Check-Out the 2022-2026 Toyota Tundra Full-Length Modular Roof Rack This roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Includes (8) aluminum extruded cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails and complete hardware. *Lights sold separately. Please Note: This is a “Drill To Mount” roof rack and we suggest that you have professionally installed. We will not be held responsible for any damage to your vehicle.

• (6) light 6” cut out
• (10) light 4” cut out
• Single row 40-inch light bar cut out
• No cut out visor
• Signature bottle openers

The Westcott Designs Billet Switch Pros Keypad Bracket is the perfect interior mounting solution for your 3rd Gen or 2022-2026 Toyota Tundra.  The bracket provides a secure and convenient way to access your Switch Pros keypad.  Designed specifically for a clean and seamless installation, this bracket ensures quick access to the buttons and controls for all your accessories wired to the Switch Pros module. Milled from Billet Aluminum with precision craftsmanship, this bracket is designed to fit perfectly within the Toyota Tundra interior, offering a professional, factory-like appearance.  Whether controlling lights, winches or other auxiliary systems, the ergonomic positioning of the keypad allows for easy, distraction-free operation while driving. Upgrade your truck with the Westcott Designs Billet Switch Pros Keypad Bracket for reliable functionality, enhanced convenience, and a polished look.

Westcott Designs Tundra TRD Off-Road FRONT ONLY preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After installing you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-2021 Tundra TRD Off-Road: 3” (front lift)

Westcott Designs™ Pre-Runner Front Bumper & Skid Plate Package for 3rd Gen (2022–2026) Toyota Tundra

Upgrade your 2022–2026 Toyota Tundra with the Westcott Designs Pre-Runner Front Bumper and Skid Plate Combo—engineered for aggressive off-road performance, trail protection, and a race-inspired pre-runner look.

Designed specifically for the 3rd Generation Toyota Tundra, this bumper and skid plate system delivers the strength, clearance, and durability serious off-roaders demand—without sacrificing daily drivability or factory fitment or sacrificing the front and rear parking sensors.

Westcott Designs™ Bed Rack the 2022-2026 Toyota Tundra. Compatible with both 5.5’ and 6.6’ length beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36", 40" and 42" lengths to accommodate all configurations of accessories and bed lengths. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately

Westcott Designs Tundra TRD Sport FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire*  The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-2021 Tundra TRD Sport: 3” (front lift)

ALL-NEW Westcott Designs Billet Rear Upper Trailing Arms for your 2023+ Toyota Tundra (3rd Gen). These Upper Trailing Arms combine with the Lower Trailing Arms to provide greater strength, stability, control and dynamics off-road!