shopping

Westcott Designs rock sliders for the 2010-'24 5^th generation 4runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas)  

Westcott Designs 2010-2024 4Runner SR5, TRD Off-Road, Trail, Venture & Premium Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2010-2024 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift)

Westcott Designs roof rack floor inserts for 5^th gen 4Runner modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. *Not compatible with the lo-pro model

Westcott Designs 4Runner TRD PRO FOX (FRONT ONLY) lift kit for the 2021-2024 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load. This kit provides the following lifts:

• 2021-2024 4runner: 1.6-1.7” (front lift)

[fusion_youtube id="Q3gAqzoZ4Hs" alignment="" width="" height="" autoplay="false" api_params="" hide_on_mobile="small-visibility,medium-visibility,large-visibility" class="" css_id=""][/fusion_youtube]

CURRENT LEAD TIMES: 6-8 WEEKS --- --- *Verified to fit '24 model year* Westcott Designs 4Runner SR5, TRD Off-Road, Trail, Venture & Premium preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2010-'24 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift) and 1.25” (rear lift)

Toyota 4Runner 2010-2024 (5th Gen) Full-Length Modular Roof Rack by Westcott Designs

Westcott Designs full length modular roof rack for the (2010-'24) 5^th generation 4Runner. Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately. **TRD PRO models require new factory OEM bolts to attach the rack to the roof of the vehicle (Part #63230-42010) available separately below.

The Classic Westcott Designs 5th Gen 4Runner Ladder & What's New for Version 2.0? We love our classic 5th Gen 4Runner Ladder Version 1.0, and so do so many customers.  It's a solid design and still a huge contender on the market for anyone looking for a solid mounting ladder to access your 4Runner roof.  This ladder has everything you need and more, so how do you improve on it?  Dropping Weight.  Even though the ladder is made from Aluminum, it's still is around 18 lbs.  And, we found as the 4Runner aged, the OEM rear hatch struts sometimes struggled to open. There are aftermarket rear hatch strut upgrades (linked here) that we install in our own shop here in AZ that have worked well for us.  But, as you know, Jeff Westcott is all about his customers and providing the best products.  He's never satisfied. So, we made some slight design changes for Version 2.0.  This new ladder (5th Gen 4Runner Ladder Version 2.0) follows our updated design language you'll see on our newest ladders for the GX550, LC250 or 6th Gen 4Runner.  The new design is clean and a simple evolution from Version 1.0, but most importantly, it drops weight and gives our customers a lighter ladder without compromising on style, strength or function.   Why keep version 1.0? Because, again, you the customer!  We released Version 2.0 and we had calls that people liked the Version 1.0's design.  They didn't care that it weighed more, they just liked the look.  That's it!  You got it!  We get it ourselves.  For being a company that's as much about function as it is design, we get it when you fall in love with a style or a look.  So here it is. In all it's glory. Version 1.0 still available for order.  Or, you can check out our All-New Version 2.0 HERE.