shopping

--- Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing.  This is not your typical spacer lift that you hear horror stories about.  Our kit will not limit your suspension or bottom out prematurely.  It works the same way a coil over works just without being adjustable.  You will still retain the factory suspension geometry.  Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible.  We then hard anodized them to make them look better than factory.  With our kit you don’t have to max out your 5100 and can retain a great ride.  We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:

• 4Runner: 3” (front lift) and 1.25” (rear lift)
• Tacoma: 3” (front lift) and 1” (rear lift)
• Tundra: 3” (front lift) and 1” (rear lift)

Note: This listing is for our preload collar lift kit only, this kit does NOT include shocks.

*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs NEW TRD PRO 4Runner 2” (FRONT ONLY) lift kit for the 2021-'24 model years. This kit is designed to give you an additional 2” front only lift rather than our standard 1.5” lift. The intention of this kit is to enable you to either run a larger tire (Up to a 285/75R17) or to help correct the ride height of your TRD PRO if you add additional front-end weight with a bumper and/or winch. *If you are looking to use this kit to lift your 4Runner to run the larger tire options, you will need to run a 2” rear spring so the vehicle will sit correctly front to rear. We use and have had a lot of luck with either Icon (#52700) or OME (#2895) springs. All Westcott Designs products are proudly manufactured in-house to the highest specifications. All our preload collar lift kits are CNC machined out of billet aluminum and are hard anodized black or are available in raw aluminum finish as well. This kit provides the following lifts:

• 2021-'24 4Runner: 2” (front lift only)

LEARN MORE HERE  https://www.youtube.com/watch?v=yJn91bQHE2c

2024-2026 Toyota Land Cruiser Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the  2024-2026 Toyota Land Cruiser.  You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up.  Laser cut and powder coated for a strong durable finish attached at both the All-New 2024-2026 Toyota Land Cruiser Full-Modular Roof Rack  and two 4.5” Industrial Vacuum Pump Suction Mounts included. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser.  Available in Driver-Side, Passenger-Side or get the Set!

Westcott Designs Modular Carrier Rack. Universal fit works in any 2” standard receiver. Features a dual side design to allow the user the ability to add on or remove equipment as needed on the go. Tire arm is available with either center mount or right side offset. Carrier arm is built out of 3"x2" box .120" wall tubing and the tire arm is built out of 1.75" diameter .120" wall DOM tubing. Tire carrier features a wheel mounted attachment system with multiple different lug patterns available to accommodate most popular patterns. Multiple options for arms that include additional left spare tire rack, optional cooler rack with worktable, grill mount and more!* Pass through receiver tow hitch, rated to tow up to 10,000lbs. and feature secure CNC cut dove tail attachment points for arm(s).  All carrier racks feature our Westcott anti wobble wedge (US patent #10,661,722) receiver hitch that ensures your equipment stays put no matter what kind of abuse you put it through. *Coming soon Please confirm your lug pattern before placing your order by using this quick tool here - https://tiresize.com/bolt-pattern-finder/  If you don't see your lug pattern listed in the drop down selection please select the "custom" option and be sure to put a good phone number for your order so we can contact you for lug pattern specs needed.

• Modular Design
• Accessory mount plate
• Fits up to a 37” tall tire
• Black powder coat finish
• Made in the U.S.A.
• Lifetime Warranty

Check-Out the Westcott Designs Rock Sliders for the 2024-2026 Lexus GX 550. **IMPORTANT: Toyota has 2 different frames that come with ¹PRE-TAPPED HOLES and some that are NOT pre-tapped.  Please check your frame and choose which Hardware Pack is going to work for your install:

• Hardware Kit 1: Frame has pre-tapped holes (meaning they have threads or grooves cut into it allowing for a bolt or screw).
• Hardware Kit 2: Frame DOES NOT have pre-tapped holes.  There may be holes but there are no threads/grooves to allow for a bolt to screw into the frame.  In this case, you'll need Hardware Kit 2 which includes Blind Bolts. (if you have questions, please reach out to our team at 1-888-574-5270)

Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through.   *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable.  

Westcott Designs rock sliders for 2007-'21 Toyota Tundra CrewMax, standard bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 15 degree), with or without top plates and a durable BK08 black powder coat finish. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable.

2023-2026 Toyota Sequoia Rear Hatch Ladder by Westcott Designs Westcott Designs rear hatch ladder for the all new 2023-2026 Toyota Sequoia! Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! SEQUOIA LADDER MOUNT TEMPLATE How strong is our ladder? Click to see!

• Signature bottle opener
• Precision laser cut and welded top plate
• All extrude honed step system
• All black stainless hardware
• Fully Assembled
• Due to high volume of orders, new orders ship within 3-4 weeks of date of order placed. 

https://www.youtube.com/watch?v=vV8yYj4zXGo

Full Length Roof Rack

Westcott Designs 2nd & 3rd Gen Tacoma roof rack. Features extruded aluminum cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”.All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.

• (6) light 6” cut out
• (10) light 4” cut out
• Single row 40-inch light bar cut out
• No cut out visor
• Signature bottle openers

All-New 6th Gen 2025-2026 Toyota 4Runner Molle Panels by Westcott Designs™ - Attaches to the 4Runner Modular Roof Rack Or 4Runner Lo-Profile Roof Rack Check out the Westcott Designs™ molle panels for the ALL-NEW 6th Gen 2025 Toyota 4Runner.  You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland and Off-Road Set-up.  Laser cut and powder coated for a strong durable finish attached to the 4Runner Lo-Profile Roof Rack or Modular Roof Rack.   Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your 4Runner.  Available in Driver-Side, Passenger-Side or get the Set! *Disclaimer: MUST HAVE either the Lo-Profile Roof Rack OR Modular Roof Rack for the 4Runner by Westcott Designs™ to attach the molle panels to the 6th Gen 4Runner.