shopping

PRE-ORDER the 2025-2026 Toyota 4Runner (6th Gen) Full-Length Modular Roof Rack by Westcott Designs

Check-out Westcott Designs full length modular roof rack for the 2025-2026 Toyota 4Runner (6th Gen). Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.

Check-Out the ALL New 2024+ Chevy 2500 Bison Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders.  The Chevy 2500 Bison Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength.

Check-Out the ALL New 2024+ Chevy 3500 Bison Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders.  The Chevy 3500 Bison Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength.

All-New 6th Gen 2025-2026 Toyota 4Runner Molle Panels by Westcott Designs™ - Attaches to the 4Runner Modular Roof Rack Or 4Runner Lo-Profile Roof Rack Check out the Westcott Designs™ molle panels for the ALL-NEW 6th Gen 2025 Toyota 4Runner.  You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland and Off-Road Set-up.  Laser cut and powder coated for a strong durable finish attached to the 4Runner Lo-Profile Roof Rack or Modular Roof Rack.   Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your 4Runner.  Available in Driver-Side, Passenger-Side or get the Set! *Disclaimer: MUST HAVE either the Lo-Profile Roof Rack OR Modular Roof Rack for the 4Runner by Westcott Designs™ to attach the molle panels to the 6th Gen 4Runner.

2025-2026 Toyota 4Runner Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset.

--- Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:

• 4Runner (2019-2020*): 1.5” (front lift)
• Tacoma (2017-2019): 1.5” (front lift)
• Tundra (2018-2021): 1.5” (front lift)

*Please note this kit comes with "flat" style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with "stepped" front lower collars. Installation video provided in the full description below.

Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:

• 4Runner (2019-2020*): 1.5” (front lift)
• Tacoma (2017-2019): 1.5” (front lift)
• Tundra (2018-2021): 1.5” (front lift)

*Please note this kit comes with "flat" style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with "stepped" front lower collars.

Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:

• 4Runner (2019-2020*): 1.5” (front lift)
• Tacoma (2017-2019): 1.5” (front lift)
• Tundra (2018-2021): 1.5” (front lift)

*Please note this kit comes with "flat" style lower front collars and they do NOT work on 4Runners that have had the updated TSB shocks replaced by Toyota. If you have the updated front shocks you will want to order the 2021-22 kit that comes with "stepped" front lower collars. Installation video provided in the full description below.

SINGLE REAR ONLY Lift Puck - 1" or 1-5/8" - 2023-2026 Toyota Sequoia   Westcott Designs REAR ONLY  lift puck for the 2022-2026 Tundra & 2023-2026 Sequoia. Your choice of 1" or 1-5/8" of rear lift only on standard rear coil suspension equipped Tundra's & Sequoia's. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. Price for individual units, for a pair you need to order quantity of (2). *Do NOT attempt to stack pucks for more lift, you will damage other rear suspension components and it is extremely unsafe*