PRODUCT #N/A

By Westcott Designs

2022-’24 Toyota Tundra TRD PRO & 1794 Limited Fox Preload Collar Lift Kit

$449.95$499.95

-

CURRENT LEAD TIMES: 6-8 WEEKS —

— Westcott Designs preload collar lift kit for the all-new 2022-’24 Toyota Tundra TRD PRO & 1794 Limited equipped with Fox shocks! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true “like factory” look. From the factory the new Tundra PRO comes with 1.1″ of front lift. Our Westcott kit gives you additional 2.5” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming)

These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA!

 

 

Lead Time: 6-8 WEEKS

Due to the increase in demand and our relentless pursuit of quality, lead times of many of our products may take more time than previously expected. Thank you for your understanding and we promise it will be worth the wait!

Compare
SKU: 35210 Category: Tags: , , , , ,

Description

CURRENT LEAD TIMES: 6-8 WEEKS

Westcott Designs preload collar lift kit for the all-new 2022-’24 Toyota Tundra TRD PRO & 1794 Limited equipped with Fox shocks! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true “like factory” look. From the factory the new Tundra PRO comes with 1.1″ of front lift. Our Westcott kit gives you additional 2.5” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming)

These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA!

*Please note – we have seen some new PRO model Tundra’s come from the factory with a .500″ (1/2″) lean from side to side in the rear. Please measure both sides of the rear of your truck to see if your truck leans or not before ordering your kit. We are offering the rear setup with either (2) 1.00″ rear pucks or (1) 1.00″ rear puck and (1) 1.50″ rear puck.

Please watch this short video for more information – https://www.youtube.com/watch?v=va11ZCZKAyk

*Patent Pending

*No shocks are included with purchase

This kit provides the following lifts:

  • 2022-’24 Tundra Fox suspension equipped trucks: 2.5” (front lift) and 1.00” (rear lift)

Additional information

Weight 15 lbs
Dimensions 12 × 10 × 8 in
Rear Puck Setup

1.00" Rear Pucks, 1.00"/1.50" Rear Pucks

Finish

Raw Aluminum, Black Anodize

Return Policy

Refund eligibility for returns is as follows:

  • Within 30 days of invoice date: Refund and/or store credit on parts only, less any restocking fees
  • After 30 days of invoice date: No returns or refunds after 30 days

Refunds will be given on parts only and excludes shipping, or any other charges. All parts must be returned in the original package, with all supplied parts, cannot be damaged or installed, and must be in original condition. All returned parts must be sent freight prepaid and fully insured and are subject to a re-boxing fee. We recommend using Fedex/UPS ground services with the insured value at the retail price of what’s being returned. Returned parts that are damaged during transit to us are non-returnable. Certain parts are not returnable, including but not limited to wheels and tires that have been mounted and/or installed, fiberglass parts, special and custom orders, electrical items, and closeouts.

Note that all returns are subject to a 15-25% restocking fee. Please include all original packaging, manuals, and ancillary materials in order to avoid being penalized.

Instructional Videos

Title

cross leads icon
Go to Top