×
-
Westcott Designs AVS rear link arms for the 2022-'24 Tundra and 2023-'24 Sequoia. Gives you 7/8" of rear lift only on a rear air suspension equipped Tundra & Sequoia. Laser cut stainless steel, made in the U.S.A and come with a lifetime warranty. -
Westcott Designs Front Bumper Relocation Brackets for 2007 & Up Toyota Tundra. Enables you to run a 35” tall tire without trimming the bumper flange or inner fender liner. Laser cut out of .250” mild steel for a precise fit and powder coated black for durability that will last for years to come. Comes as a pack of four, (2) units required for each side to shim your bumper out a total of .500”. Duplicated to the factory OEM design to transfer the energy into the crumple zones in case of a frontal collision. Made in the U.S.A. and come with a Lifetime Warranty.- Compatible with both factory and most bolt-on accessory type bumpers
- Easy installation using existing OEM hardware
- Made in the U.S.A
- Lifetime Warranty
-
TRD Pro Truck Bed Vinyl Inserts compatible with Toyota Tundra 2015-22'- SET OF TWO - For both sides of the bed.
- FLUSH/FLAT LETTERS - Made of high quality vinyl.
- WEATHER AND CAR WASH SAFE - Excellent resistance to long-term exposure to sunlight and weathering.
- SIMPLE INSTALLATION - Made easy with die cut backing that keeps spacing exact every time.
- MADE IN THE USA
-
Westcott Designs universal shock reservoir brackets. Enables to re-locate your remote shock reservoir as needed for clearance and/or ease of access to the adjusters. Made out of mild steel, laser cut and precisely bent. Powder coated in a durable textured black finish. Made in the U.S.A. and come with a Lifetime Warranty.- Compatible with most remote reservoirs (Fox, King, Bilstein)
- Durable Powder Coat Finish
- Made in the U.S.A
- Lifetime Warranty
-
Westcott Designs Billet Bottle Openers, enhance the appearance of your Westcott Designs roof rack or ladder with a pair of our Billet Aluminum bottle openers. CNC machined out of 5160 aluminum, engraved with our signature WD logo and ready to be anodized* color of your choice or leave them as is for a clean raw machined finish. These bottle openers were such a hit with our SEMA build last year that we decided to make a small run of them to offer to the public, sold in pairs. *These only come in raw aluminum finish, anodized finishes would be done by the end consumer. No anodizing services available or offered by Westcott Designs. Fitment as follows: Roof Racks:- 5th Gen 4Runner (Modular Only)
- FJ Cruiser
- Sequoia (Modular & LoPro)
- Yukon
- 4th Gen 4Runner
- 5th Gen 4Runner
- Sequoia
- Yukon
-
We are a full fab shop and a full production shop. Please give use a call on your small or large projects. You won't be disappointed you did. -
Westcott Designs C4 Bumper Universal Light Bar Brackets, designed to allow you to mount your favorite light bar properly inside your C4 front bumper. We found that the standard brackets supplied with most lightbars don't allow you to mount the light flush inside the bumper. Our Westcott Designs brackets allow you infinite adjustability to suite your likeness and include different shims to accommodate all of the popular light bar brands out on the market today. Brackets are made out of stainless steel, and laser bent on our fully automated press brake. Sold in pairs. Check It Out -
Westcott Designs Light Bar Brackets, designed to allow you to mount your favorite light bar to not only our roof rack but any roof rack that uses standard Series 10 extruded honed cross bars. Available in different lengths to fit many different light bars and come with hardware as needed. All brackets are made out of mild steel, laser bent on our fully automated press brake and powder coated black for a strong, durable and long lasting finish. Sold in pairs.- Short 1-3/8th" (Used for single row light bars like Rigid SR series, Baja Designs S8 series and similar)
- Long 1-7/8th" (Used for dual row light bars like Rigid E series, Baja Designs OnX6 series and similar)
- Compatible with all Series 10 extrude honed cross bars
- Made in the U.S.A
- Lifetime Warranty
-
Front Camera Relocation Bracket
Westcott Designs front camera bracket allows you to transfer your factory OEM front camera from a standard Tundra or Sequoia grill to the OEM TRD PRO grill (Part# 53101-0C220). Why pay over $500 from the dealer as its only sold as a complete unit when you can spend just $19.95 here for the same result! Bracket is made of 100% stainless steel and comes in a durable black powder coat finish. *T6 torx driver required, not included. -
Front Camera Relocation Bracket
Westcott Designs front camera relocation bracket allows you to transfer your factory camera into an OEM TRD PRO grill. Why pay over $500 from the dealer as its only sold as a complete unit when you can spend just $19.95 here for the same result! *This mount ONLY works on an OEM TRD PRO grill. -
Westcott Designs License Plate Mount for Westcott Designs Hitch Mount Racks with the following part numbers: 10001BK 10002BK-R 10002BK-T 10003BK-R 10003BK-T 10004BK **Does NOT fit the Single Tire Carrier rack, only fits the original dual arm hitch mount racks** Product Dimensions (in): 12 x 9.5 -
Tubing End Cap with Integrated Bottle Opener. Made out of stainless steel, CNC machined to exacting tolerances for a perfect fit every time. Designed for 1.75" x .120" round tubing. The outside diameter of the insert is 1.505". This is designed to be plug welded in.