Shop Quality Truck Accessories and Merchandise Online

2025-2026 Toyota 4Runner (6th Gen) Full Length Lo-Pro Roof Rack by Westcott Designs

Full Length Lo-Pro Roof Rack

• No cut out visor (plain)
• Single row 40" (Standard) light bar cut out
• Single row 42" (Rigid Adapt or similar) light bar cut out
• Single row 44" (Cali-Raised or similar) light bar cut out
• (10) light 4” cut out (Baja Designs Squadron, Rigid 360 Series or similar)
• (6) light 6” cut out (Baja Designs LP6, Rigid 6" or similar)
• Signature bottle openers
• Currently 4-6 week production lead time

2010-2024 Toyota 4Runner 5th Gen Full Length Lo-Pro Roof Rack by Westcott Designs

Westcott Designs 4Runner TRD PRO FOX lift kit for the 2021-2024 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer than OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. As for the rear, we CNC machine all of the parts and hard anodize them to have a great look and to maximize the life of them to make sure they outlast the vehicle. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you, but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load. This kit provides the following lifts:

• 2021-'24 4runner: 1.6-1.7” (front lift) and 1.25” (rear lift)

Version 2.0! Westcott Designs 5th Gen (2010-2024) 4Runner rear hatch ladder 2.0! Construction is all aluminum to keep it light weight. The uprights are double layered and updated from the 1/4" to 3/16" aluminum to make them super rigid and dropping some weight in the process.  We also enlarged the cutouts in the side rails and top plate to lose some weight without compromising rigidity and stability. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market!

2025-2026 Toyota 4Runner (6th Gen) Switch Pros Module Engine Bay Mount

2025-2026 Toyota 4Runner (6th Gen) Front-End 1/2" Top Spacer

ALL-NEW Westcott Designs Billet Rear Upper Trailing Arms for your 2025-2026 Toyota 4Runner (6th Gen). These Upper Trailing Arms combine with the Lower Trailing Arms to provide greater strength, stability, control and dynamics off-road!

ALL-NEW Westcott Designs Billet Rear Lower Trailing Arms for your 2025-2026 Toyota 4Runner (6th Gen). Like the upper-control arms, these are a Westcott First and adding to our lift and suspension line-up designed, engineered and built in-house here in Phoenix, AZ, right here in the US of A! That's right folks! This is machined down from a block of Billet Aluminum into this beautiful masterpiece that will not just LOOK amazing but perform above and beyond! This is TRUE OE+ upgrades that you'll want to be first in line to get your hands on these beauties. They are available for PRE-ORDER TODAY! Don't miss your spot in line and pre-order yours today.