• Location: Phoenix, AZ
• Hours: Monday – Friday, 7:30 AM – 4:30 PM
• Pay Range: $18 – $24/hr (depending on experience)
• Benefits: Health & Dental Insurance, PTO, PST

About Westcott Designs

Westcott Designs is proud to design and manufacture high-quality, American-made off-road and automotive parts. From roof racks and ladders to rock sliders and accessories, our products are engineered to perform and built to last. Our mission is to deliver innovation, craftsmanship, and exceptional service to customers nationwide.

We’ve built a culture around teamwork, integrity, and growth. At Westcott Designs, you’ll be part of a supportive and fast-paced environment where hard work is valued and new ideas are encouraged.

Position Overview

We are looking for a reliable Shipping & Warehouse Staff Member to join our team. This role is essential in ensuring that products are accurately prepared, packaged, and shipped to our customers. The Shipping & Warehouse staff will also help maintain an organized warehouse, assist with inventory management, and support the production team as needed.

Responsibilities

• Prepare and package products for shipment with care and accuracy.
• Process shipping labels and coordinate with carriers (UPS, FedEx, Freight, etc.).
• Receive, inspect, and stock incoming materials and supplies.
• Maintain accurate inventory records and assist with cycle counts.
• Organize and keep warehouse areas clean, safe, and efficient.
• Assist in loading and unloading deliveries as required.
• Collaborate with the production team to ensure orders are completed and shipped on time.
• Operate forklifts, pallet jacks, and other warehouse equipment safely (training provided if needed).

Qualifications

• Previous warehouse, shipping/receiving, or logistics experience preferred.
• Knowledge of shipping software and carrier systems (UPS, FedEx, Freight) is a plus.
• Strong attention to detail and accuracy in handling orders.
• Ability to lift 50 lbs and stand for extended periods.
• Reliable, punctual, and team-oriented.
• Strong organizational and multitasking skills.
• Forklift certification a plus, but not required.

Why Work at Westcott Designs?

• Competitive pay based on experience ($18–24/hr).
• Health & dental benefits.
• Paid Time Off (PTO) & Paid Sick Time (PST).
• A fast-paced, team-oriented environment with opportunities for growth.
• Be part of a company committed to quality, innovation, and American-made craftsmanship.

• Location: Phoenix, AZ
• Hours: Monday - Friday, 7:30 AM - 4:30 PM
• Pay Range: Up to $30/HR (Depending on Experience)
• Benefits: Health & Dental Insurance, PTO, PST

At Westcott Designs, we take pride in manufacturing high-quality, American-made parts that stand up to the toughest conditions. From precision machining to custom powder coating, we are passionate about delivering products that elevate performance and style. Our mission is to engineer innovative solutions, deliver superior craftsmanship, and provide the highest level of service for off-road enthusiasts and automotive communities across the country.

About Westcott Designs

We foster a team-oriented culture built on integrity, collaboration, and a drive for excellence. When you join Westcott Designs, you’re not just taking a job—you’re becoming part of a family that values hard work, creativity, and continuous growth in a supportive and fast-paced environment.

Position Overview

We are seeking an experienced Laser Operator to join our Manufacturing Department. This role involves working with high-precision, expensive laser cutting equipment to cut, prep, and shape steel tubing and flat aluminum sheets. The Laser Operator will be instrumental in creating the foundational components used in Westcott Designs products, including roof racks, rock sliders, ladders, and more.

Responsibilities

• Operate and maintain laser cutting machines for steel tubing and flat aluminum sheet materials.
• Read and interpret blueprints, drawings, and specifications to ensure accurate cuts.
• Monitor machine performance, make adjustments as needed, and perform routine maintenance.
• Ensure materials are properly loaded, aligned, and processed according to job requirements.
• Inspect finished components for accuracy, quality, and adherence to specifications.
• Work closely with the fabrication team to support bending, welding, and assembly processes.
• Follow safety protocols and maintain a clean, organized work area.
• Assist in identifying process improvements and support overall production efficiency.

Qualifications

• Prior experience operating laser cutting machines in a manufacturing shop environment required.
• Knowledge of steel and aluminum material handling, cutting, and preparation.
• Ability to read and interpret technical drawings, blueprints, and specifications.
• Strong attention to detail and quality standards.
• Mechanical aptitude with troubleshooting and problem-solving skills.
• Comfortable working in a fast-paced, production-driven environment.
• Ability to lift 50 lbs and stand for extended periods.
• Team player with a strong work ethic and a desire to grow within the company.

Why Work at Westcott Designs?

• Competitive pay based on experience.
• Health & dental benefits.
• Paid Time Off (PTO) & Paid Sick Time (PST).
• Opportunity to work with cutting-edge manufacturing technology.
• A supportive, fast-paced, and innovative work environment.
• Be part of a company that takes pride in American-made products and craftsmanship.

• Location: Phoenix, AZ
• Hours: Monday - Friday, 7:30 AM - 4:30 PM
• Pay Range: $18-$25/HR (Depending on Experience)
• Benefits: Health & Dental Insurance, PTO, PST

At Westcott Designs, we take pride in manufacturing high-quality, American-made parts that stand up to the toughest conditions. From precision machining to custom powder coating, we are passionate about delivering products that elevate performance and style. Our mission is to engineer innovative solutions, deliver superior craftsmanship, and provide the highest level of service for off-road enthusiasts and automotive communities across the country.

About Westcott Designs

We foster a team-oriented culture built on integrity, collaboration, and a drive for excellence. When you join Westcott Designs, you’re not just taking a job—you’re becoming part of a family that values hard work, creativity, and continuous growth in a supportive and fast-paced environment.

Position Overview

We are seeking a Sand Blaster to join our Powder Coat Department. This role is critical to ensuring that all Westcott Designs products are properly prepared before receiving their powder coat finish. The Sand Blaster will be responsible for using blasting equipment to clean, smooth, and prepare surfaces, ensuring the highest quality results that meet our production and quality standards.

Responsibilities

• Prepare and clean parts prior to powder coating using sand blasting equipment.
• Inspect products before and after blasting to ensure surfaces are properly prepped.
• Maintain and operate blasting equipment safely and efficiently.
• Work closely with the powder coat team to meet production deadlines.
• Follow quality control procedures to ensure consistency in product finishes.
• Keep the work area clean, organized, and safe.
• Assist in other areas of the Powder Coat Department as needed.

Qualifications

• Previous sand blasting or surface preparation experience preferred (but willing to train the right candidate).
• Ability to operate sand blasting equipment safely and effectively.
• Strong attention to detail and commitment to quality.
• Reliable, punctual, and able to work in a fast-paced environment.
• Ability to lift 50 lbs and stand for extended periods.
• Team-oriented mindset with a positive, can-do attitude.

Why Work at Westcott Designs?

Be part of a mission-driven company that values quality, craftsmanship, and American-made products.

• Location: Phoenix, AZ
• Hours: Monday – Friday, 7:30 AM – 4:30 PM
• Pay Range: $18 – $24/hr (depending on experience)
• Benefits: Health & Dental Insurance, PTO, PST

Westcott Designs is a premier American manufacturer of high-quality off-road parts and accessories, built proudly in Phoenix, Arizona. Known for innovation, craftsmanship, and performance, we build products that adventure seekers trust - lift kits, roof racks, ladders, and more. We're growing fast, and we're looking for hard working, detail-driven individuals to join our Manufacturing Team.

Read more about the company HERE.

Key Responsibilities (Depending on Role):

• Handle raw materials and perform parts prep for finishing and assembly
• Ensure accurate and high-quality production with attention to detail
• Maintain clean and organized workstations and areas
• Perform inspections and basic quality control
• Different machine operation capabilities and competency - Laser Tube Cutter, Tube bending, parts bending, etc.

Preferred Skills:

• Experience in Manufacturing, machining, or fabrication
• Ability to read and follow technical instructions
• Strong work ethic and positive attitude
• Mechanical aptitude and attention to detail
• Willingness to learn and grow with the company
• Forklift or shop equipment experience a plus

Schedule and Compensation:

• Full-time position with competitive pay based on experience.
• Benefits include health insurance, paid time off, and opportunities for advancement.

Join our team and contribute to crafting industry-leading automotive components that drive performance and innovation!

Westcott Designs is looking for experienced CNC Operators for our EXPANDING CNC Machine Shop. $18-35 Per Hour, depending on experience. Great place to work! Work Monday - Friday 7:30 AM-4 PM, Paid Time Off & Benefits!

The company has been growing each year and we are always looking for good people to join our team. This is a great opportunity to join a team and company that is growing rapidly. Please submit your application and resume below. You can also learn more about our company HERE.

Job Title: Automotive CNC Operator

Job Summary:

We are seeking a skilled and detail-oriented CNC Operator to join our team in producing high-quality aluminum lift kits and other automotive parts. The ideal candidate will operate CNC machines with precision to create components that meet tight specifications, ensuring quality, efficiency, and safety in every step of the process.

Key Responsibilities:

• Set up, operate, and maintain CNC machines to produce aluminum lift kits and other automotive components.
• Interpret and analyze technical blueprints, CAD designs, and specifications to ensure accurate production.
• Load raw materials (e.g., aluminum stock) and oversee the machining process to maintain optimal efficiency.
• Perform quality checks using calipers, micrometers, and other measuring tools to ensure parts meet precise tolerances and specifications.
• Adjust machine settings, offsets, and tooling as necessary to maintain accuracy and quality.
• Troubleshoot and resolve issues with machines, tooling, and processes to minimize downtime.
• Perform routine maintenance on CNC equipment and keep the work area clean and organized.
• Collaborate with the engineering and production teams to improve machining processes and product designs.
• Adhere to all company safety procedures, protocols, and quality standards.

Qualifications:

• High school diploma or equivalent; technical training or certification in CNC machining preferred.
• Proven experience as a CNC Operator, preferably in an automotive or manufacturing environment.
• Proficiency in reading and interpreting blueprints, CAD drawings, and machining instructions.
• Strong knowledge of CNC programming (G-code) and machine operations.
• Familiarity with aluminum machining processes, including cutting, drilling, and milling.
• Ability to use precision measuring tools to verify part dimensions.
• Strong attention to detail and a commitment to producing high-quality products.
• Ability to work independently and as part of a team in a fast-paced manufacturing environment.
• Physical ability to lift up to 50 pounds, stand for extended periods, and perform repetitive tasks.

Preferred Skills:

• Experience with 5-axis CNC machines.
• Knowledge of automotive parts manufacturing, particularly lift kits.
• Familiarity with CAM software (e.g., Mastercam, Fusion 360).
• Welding or fabrication experience is a plus.

Schedule and Compensation:

• Full-time position with competitive pay based on experience.
• Benefits include health insurance, retirement plans, paid time off, and opportunities for advancement.

Join our team and contribute to crafting industry-leading automotive components that drive performance and innovation!

Westcott Designs is looking for Experienced MIG & TIG Welders for our Manufacturing Operations. Apply HERE.