- Compatible with both factory and most bolt-on accessory type bumpers
- Easy installation using existing OEM hardware
- Made in the U.S.A
- Lifetime Warranty
×
-
Westcott Designs Front Bumper Relocation Brackets for 2007 & Up Toyota Tundra. Enables you to run a 35” tall tire without trimming the bumper flange or inner fender liner. Laser cut out of .250” mild steel for a precise fit and powder coated black for durability that will last for years to come. Comes as a pack of four, (2) units required for each side to shim your bumper out a total of .500”. Duplicated to the factory OEM design to transfer the energy into the crumple zones in case of a frontal collision. Made in the U.S.A. and come with a Lifetime Warranty. -
Check-Out the ALL New 2024-2026 GMC 2500 AT4X Bumper Light Bar (AEV Edition) from Westcott Designs™! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The GMC 2500 AT4x (AEV Edition) Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
Check-Out the ALL New 2024+ GMC 2500 & 3500 AT4X Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The GMC 2500 AT4X Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
Westcott Designs C4 Bumper Universal Light Bar Brackets, designed to allow you to mount your favorite light bar properly inside your C4 front bumper. We found that the standard brackets supplied with most lightbars don't allow you to mount the light flush inside the bumper. Our Westcott Designs brackets allow you infinite adjustability to suite your likeness and include different shims to accommodate all of the popular light bar brands out on the market today. Brackets are made out of stainless steel, and laser bent on our fully automated press brake. Sold in pairs. Check It Out -
Out of stock
Check-Out the 2024-2026 Chevy 2500 Bison AEV Bumper Light Bar from Westcott Designs™! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The Chevy 2500 Bison AEV Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength.
-
Westcott Designs™ Pre-Runner Front Bumper & Skid Plate Package for 3rd Gen (2022–2026) Toyota Tundra
Upgrade your 2022–2026 Toyota Tundra with the Westcott Designs Pre-Runner Front Bumper and Skid Plate Combo—engineered for aggressive off-road performance, trail protection, and a race-inspired pre-runner look.
Designed specifically for the 3rd Generation Toyota Tundra, this bumper and skid plate system delivers the strength, clearance, and durability serious off-roaders demand—without sacrificing daily drivability or factory fitment or sacrificing the front and rear parking sensors.
-
**NEW PRODUCT ALERT - CURRENT LEAD TIME: 6-8 WEEKS** The Westcott Designs™ Pre-Runner Front Bumper for the 2021–2026 Ford F-150 Raptor is a high-clearance, frame-cut bumper engineered for maximum approach angle and true desert performance. Available in two configurations — factory intercooler compatible or high-mount intercooler version — this system delivers a clean, factory-inspired fit with aggressive pre-runner styling and uncompromised functionality. -
Check-Out the ALL New Bumper Light Bar from Westcott Designs™ for HD F-Series Ford Trucks! That's right! This fits the 5th Gen 2023-2026 Ford F-250, F-350, F-450 & F-550! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The Bumper Light Bar was hand crafted and engineered here in-house at Westcott Designs™ in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength.