×
-
2025-2026 Toyota 4Runner Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
*IMPORTANT NOTICE: Toyota has 2 different frames, some come with THREADED HOLES and other frames are NOT THREADED. Please check your frame and choose which Hardware Pack is going to work for your install. Any hardware change request post product being shipped will cost upwards of $160 + shipping to exchange. We want to be sure you get the right hardware and save you additional time and costs. Please be sure to check your frame prior to ordering. See the diagram below for guidance on how and where to check. If you have questions, please reach out to our Customer Service team at 1-888-574-5270. Westcott Designs rock sliders for the ALL-NEW 2025+ Toyota 4runner 6th generation. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2025-2026 Toyota 4Runner (6th Gen) Full Length Lo-Pro Roof Rack by Westcott Designs
Westcott Designs full length lo-pro roof rack for the 2025-2026 Toyota 4Runner 6th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include aluminum extruded cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately. -
Check out the ALL-NEW 6th Gen 2025+ Toyota 4Runner FRONT ONLY Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
Check out the ALL-NEW 6th Gen 2025-2026 Toyota 4Runner Preload REAR-ONLY Lift Pucks from Westcott Designs! *SOLD IN PAIRS This puck features all new CNC machined components and is available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This puck gives you .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. These are NOT your traditional spacer lift pucks, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2025-2026 Toyota 4Runner (6th Gen). Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for. -
2024-2026 Toyota Tacoma (4th Gen) Westcott Designs 1/2 inch FRONT Top Spacer
Dial in the perfect stance for your 4th Gen Toyota Tacoma with the Westcott Designs 1/2” Top Spacer. Designed to provide an additional 1/2 inch of front-end lift, this precision-machined aluminum spacer helps reduce factory rake for a more leveled and aggressive look. Ideal for those looking to fine-tune their suspension setup without compromising ride quality, each spacer is CNC-machined from high-grade aluminum and offered in your choice of a sleek black anodized finish or classic raw aluminum. Whether you’re compensating for added front-end weight or just want a more balanced stance, the Westcott 1/2” Spacer is the clean, simple solution. Be sure to check-out our YouTube Channel to learn more about Westcott Designs products and all the new products we'll be releasing for the 6th Gen 2025-2026 Toyota 4Runner! Westcott Designs YouTube Channel -
2024-2026 Lexus GX550 Westcott Designs 1/2 inch FRONT Top Spacer
Dial in the perfect stance for your Lexus GX550 with the Westcott Designs 1/2” Top Spacer. Designed to provide an additional 1/2 inch of front-end lift, this precision-machined aluminum spacer helps reduce factory rake for a more leveled and aggressive look. Ideal for those looking to fine-tune their suspension setup without compromising ride quality, each spacer is CNC-machined from high-grade aluminum and offered in your choice of a sleek black anodized finish or classic raw aluminum. Whether you’re compensating for added front-end weight or just want a more balanced stance, the Westcott 1/2” Spacer is the clean, simple solution. Be sure to check-out our YouTube Channel to learn more about Westcott Designs products and all the new products we'll be releasing for the 6th Gen 2025-2026 Toyota 4Runner! Westcott Designs YouTube Channel -
2025-2026 Toyota 4Runner (6th Gen) Front-End 1/2" Top Spacer
Looking for a little extra lift on the front end of your 6th Gen 4Runner? We have just the solution. It's a 1/2" Top Spacer made here in the USA at Westcott Designs manufacturing facility in Phoenix, AZ. Be sure to check-out our YouTube Channel to learn more about Westcott Designs products and all the new products we'll be releasing for the 6th Gen 2025-2026 Toyota 4Runner! Westcott Designs YouTube Channel