×
-
2025-2026 Toyota 4Runner Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
2025-2026 Toyota 4Runner (6th Gen) Full Length Lo-Pro Roof Rack by Westcott Designs
Westcott Designs full length lo-pro roof rack for the 2025-2026 Toyota 4Runner 6th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include aluminum extruded cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately. -
Westcott Designs FRONT ONLY preload collar lift kit for the all-new 2022-2026 Toyota Tundra TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tundra PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 2.5” front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with purchase This kit provides the following lifts:- 2022-2025 Tundra Fox PRO suspension equipped trucks: 2.5” (front lift)
-
Check-out the Westcott Designs rock sliders for the all-new 2024-2026 Toyota Land Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2024-2026 Toyota Tacoma 4WD Short Bed Rock Sliders by Westcott Designs
The Best Quality For Your New Truck!
Protect your 2024-2026 Tacoma Short Bed and elevate your off-road game with Westcott Designs premium rock sliders. Westcott Designs rock sliders for the 4th Gen Toyota Tacoma Short Bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2024-2026 Toyota Tacoma Roof Rack by Westcott Designs™
Westcott Designs roof rack for the 2024-2026 Tacoma (4th Gen). Features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels. Westcott Designs roof rack for the all new 2024 Tacoma! New features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels.- No cut out visor
- Single row 41-inch light bar cut out
- Single row 42.5-inchl ight bar cut out
- Rigid Adapt light bar cut out
- (10) light 4” cut out
- Signature bottle openers with or without the truck logo
-
IN STOCK & READY TO SHIP!! - - Westcott Designs rear hatch ladder for the 2025-2026 Toyota 4Runner (6th Gen). Construction is all aluminum to keep it light weight. The uprights are double layered 3/16 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market!Westcott Designs Ladder Features
- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
All-New 6th Gen 2025-2026 Toyota 4Runner Molle Panels by Westcott Designs™ - Attaches to the 4Runner Modular Roof Rack Or 4Runner Lo-Profile Roof Rack Check out the Westcott Designs™ molle panels for the ALL-NEW 6th Gen 2025 Toyota 4Runner. You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland and Off-Road Set-up. Laser cut and powder coated for a strong durable finish attached to the 4Runner Lo-Profile Roof Rack or Modular Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your 4Runner. Available in Driver-Side, Passenger-Side or get the Set! *Disclaimer: MUST HAVE either the Lo-Profile Roof Rack OR Modular Roof Rack for the 4Runner by Westcott Designs™ to attach the molle panels to the 6th Gen 4Runner. -
Check-Out the Westcott Designs Rock Sliders for the 2024-2026 Lexus GX 550. **IMPORTANT: Toyota has 2 different frames that come with ¹PRE-TAPPED HOLES and some that are NOT pre-tapped. Please check your frame and choose which Hardware Pack is going to work for your install:- Hardware Kit 1: Frame has pre-tapped holes (meaning they have threads or grooves cut into it allowing for a bolt or screw).
- Hardware Kit 2: Frame DOES NOT have pre-tapped holes. There may be holes but there are no threads/grooves to allow for a bolt to screw into the frame. In this case, you'll need Hardware Kit 2 which includes Blind Bolts. (if you have questions, please reach out to our team at 1-888-574-5270)
-
Check out the ALL-NEW 6th Gen 2025+ Toyota 4Runner FRONT ONLY Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
Westcott Designs rock sliders (With Kickout) for the 2022-2026 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Check out the 2024-2026 TOYOTA LAND CRUISER REAR HATCH LADDER by Westcott Designs Westcott Designs rear hatch ladder for the 2024-2026 Toyota Land Cruiser. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Westcott Designs Tacoma SR5/SR preload collar lift kit. This kit is designed for the 2005-2023 Tacoma SR5/SR with the black body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2005-2023 Tacoma SR5/SR: 3” (front lift) and 1" (rear lift)
-
Westcott Designs™ Bed Stiffeners for 2016-2023 Toyota Tacoma (3rd Gen). Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware for easy and clean installation. -
Check out the Westcott Designs molle panels for the 2010-2024 (5th Gen) Toyota 4Runner. You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland Set-up. -
2022-2026 Toyota Tundra Factory Air Bag Suspension Delete Kit - - Now you can upgrade your Toyota factory Air Ride suspension for the 2022-2026 Tundra or 2023-2026 Sequoia with Westcott Design’s Air Bag Delete kit! -
Check out the ALL-NEW 6th Gen 2025-2026 Toyota 4Runner Preload REAR-ONLY Lift Pucks from Westcott Designs! *SOLD IN PAIRS This puck features all new CNC machined components and is available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This puck gives you .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. These are NOT your traditional spacer lift pucks, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
2024-2026 Lexus GX 550 Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the All-New 2024-2026 Lexus GX 550. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached at both the All-New 2024 Lexus GX 550 Full-Modular Roof Rack and two 4.5” Industrial Vacuum Pump Suction Mounts included. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set! -
NEW
Checkout the 2024-2026 Lexus GX 550 3/4 Molle Panels by Westcott Designs™ - Attaches to the 2024-2026 Lexus GX 550 3/4 Roof Rack Check out the Westcott Designs™ molle panels for the 2024-2026 Lexus GX 550. You can choose Driver-Side, Passenger-Side or the full Pair to add to your GX 550 Overland set-up. Laser cut and powder coated for a strong durable finish attached to the All-New 2024-2025 Lexus GX 550 3/4 Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your All-New Lexus GX 550. -
Westcott Designs rock sliders for the all new 2024-2026 Toyota Tacoma Long Bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Check out the 2024-2026 Lexus GX 550 REAR HATCH LADDER by Westcott Designs Westcott Designs rear hatch ladder for the All-New 2024-2026 Lexus GX 550. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2025-2026 Toyota 4Runner (6th Gen). Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for. -
Westcott Designs rock sliders for the all new 2023-2026 Toyota Sequoia. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Full Length Modular Roof Rack by Westcott Designs™ - 20021-2026 Chevy Tahoe & GMC Yukon Westcott Designs full length modular roof rack for the 2021-2026 Chevrolet Tahoe & GMC Yukon. Designed to accommodate models with the *panoramic sunroof and for users that desire the optional floor inserts to increase your cargo space. The modular rack measures 4.5” tall to allow for full function of the standard and panoramic sunroof. Features aluminum construction for light weight (52lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 103"L x 52"W x 4.5” T, includes (11) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise at both city and freeway speeds. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite when out on the trails.- Optional floor inserts available
- Signature bottle openers
- Made in the U.S.A.
- All aluminum construction
-
2024-2026 Toyota Tacoma (4th Gen) Westcott Designs 1/2 inch FRONT Top Spacer
Dial in the perfect stance for your 4th Gen Toyota Tacoma with the Westcott Designs 1/2” Top Spacer. Designed to provide an additional 1/2 inch of front-end lift, this precision-machined aluminum spacer helps reduce factory rake for a more leveled and aggressive look. Ideal for those looking to fine-tune their suspension setup without compromising ride quality, each spacer is CNC-machined from high-grade aluminum and offered in your choice of a sleek black anodized finish or classic raw aluminum. Whether you’re compensating for added front-end weight or just want a more balanced stance, the Westcott 1/2” Spacer is the clean, simple solution. Be sure to check-out our YouTube Channel to learn more about Westcott Designs products and all the new products we'll be releasing for the 6th Gen 2025-2026 Toyota 4Runner! Westcott Designs YouTube Channel -
2024+ Lexus GX550 3/4 Roof Rack by Westcott Designs
Check-out Westcott Designs 3/4 roof rack for the 2024+ Lexus GX550. Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- No cut out visor
- Signature bottle openers
- Add-on option with floor panels
-
Check Out the 2024-2026 Lexus GX 550 Ditch Light Brackets by Westcott Designs
Check-out Westcott Designs’ A-pillar ditch light brackets for the New 2024-2026 Lexus GX 550! CAD designed, laser cut & bent, and powder coated black for a durable finish. Easy install and uses OEM mounting hardware. This unique design placed the light right next to your side-view mirrors, making it seamlessly integrate into the design of your Land Cruiser and allow the light to be where you need it without obstructing your view in any way. *Lights not included, sold separately. -
Check-Out the 2022-2026 Toyota Tundra Full-Length Modular Roof Rack This roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Includes (8) aluminum extruded cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails and complete hardware. *Lights sold separately. *Please Note: This is a “Drill To Mount” roof rack and we suggest that you have professionally installed. We will not be held responsible for any damage to your vehicle. **Panoramic Roof Fitment Note: The basket configuration is not compatible with the Panoramic Sunroof. -
NEW
Check-Out the 2022-2026 Toyota Tundra Full-Length Lo-Pro Roof Rack This roof rack has a sleek design that hugs your existing roof line. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Includes (8) aluminum extruded cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails and complete hardware. *Lights sold separately -
Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2024-2026 Toyota Tacoma (4th Gen). Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for.
-
Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2024+ Toyota Land Cruiser (LC250). Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for.
-
2010-2025 Toyota 4Runner (5th Gen) - Westcott Designs ARB Compressor Mount
Elevate your off-road setup with the Westcott Designs ARB Compressor Mount, designed to deliver unparalleled durability and functionality. Crafted with precision using the highest quality materials, this mount ensures a secure and reliable fit for your ARB compressor. -
2024-2026 Lexus GX550 Westcott Designs 1/2 inch FRONT Top Spacer
Dial in the perfect stance for your Lexus GX550 with the Westcott Designs 1/2” Top Spacer. Designed to provide an additional 1/2 inch of front-end lift, this precision-machined aluminum spacer helps reduce factory rake for a more leveled and aggressive look. Ideal for those looking to fine-tune their suspension setup without compromising ride quality, each spacer is CNC-machined from high-grade aluminum and offered in your choice of a sleek black anodized finish or classic raw aluminum. Whether you’re compensating for added front-end weight or just want a more balanced stance, the Westcott 1/2” Spacer is the clean, simple solution. Be sure to check-out our YouTube Channel to learn more about Westcott Designs products and all the new products we'll be releasing for the 6th Gen 2025-2026 Toyota 4Runner! Westcott Designs YouTube Channel -
2024-2026 Toyota Land Cruiser LC250 Westcott Designs 1/2 inch FRONT Top Spacer
Dial in the perfect stance for your Toyota Land Cruiser LC250 with the Westcott Designs 1/2” Top Spacer. Designed to provide an additional 1/2 inch of front-end lift, this precision-machined aluminum spacer helps reduce factory rake for a more leveled and aggressive look. Ideal for those looking to fine-tune their suspension setup without compromising ride quality, each spacer is CNC-machined from high-grade aluminum and offered in your choice of a sleek black anodized finish or classic raw aluminum. Whether you’re compensating for added front-end weight or just want a more balanced stance, the Westcott 1/2” Spacer is the clean, simple solution. Be sure to check-out our YouTube Channel to learn more about Westcott Designs products and all the new products we'll be releasing for the 6th Gen 2025-2026 Toyota 4Runner! Westcott Designs YouTube Channel -
Out of stock
Check-Out the 2024-2026 Chevy 2500 Bison AEV Bumper Light Bar from Westcott Designs™! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The Chevy 2500 Bison AEV Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2024+ Lexus GX550. Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for.
-
Mild Steel Corner Gusset. Weld on, Size: 2.75 x 2.5 inches, 69.85mm x 63.5mm Thickness: 0.125 inch, 11 gauge, 3.175mm. -
Westcott Designs rock sliders for the 2025-2026 Lexus LX 700h Models. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. e. -
2025-2026 Toyota 4Runner (6th Gen) Westcott Designs RotopaX™ Ladder Bracket
Enhance the functionality of your 6th Generation Toyota 4Runner with the Westcott Designs RotopaX™ Bracket, engineered exclusively for use with the Westcott Designs rear hatch ladder for the 6th Gen 4Runner. This sturdy and reliable bracket allows you to securely mount your RotopaX™ Fuel or storage packs, making it an essential addition for overland enthusiasts and adventurers alike. -
2010-2024 Toyota 4Runner (5th Gen) Westcott Designs RotopaX™ Ladder Bracket - Fits both the 5th Gen 4Runner Version 1.0 & 2.0 Ladders
Enhance the functionality of your 5th Generation Toyota 4Runner with the Westcott Designs RotopaX™ Bracket, engineered exclusively for use with the Westcott Designs rear hatch ladder for the 5th Gen 4Runner. This sturdy and reliable bracket allows you to securely mount your RotopaX™ Fuel or storage packs, making it an essential addition for overland enthusiasts and adventurers alike. -
2025-2026 Toyota 4Runner (6th Gen) Front-End 1/2" Top Spacer
Looking for a little extra lift on the front end of your 6th Gen 4Runner? We have just the solution. It's a 1/2" Top Spacer made here in the USA at Westcott Designs manufacturing facility in Phoenix, AZ. Be sure to check-out our YouTube Channel to learn more about Westcott Designs products and all the new products we'll be releasing for the 6th Gen 2025-2026 Toyota 4Runner! Westcott Designs YouTube Channel -
2024-2026 INEOS Grenadier Roof Rack by Westcott Designs
Westcott Designs roof rack for the 2024-2026 (1st generation) INEOS Grenadier. Rack includes cross bars and a front wind visor. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. -
Check out the Westcott Designs Molle Panels for the ALL-NEW 2025-2026 Lexus 700 & 600! You can choose Driver-Side, Passenger-Side or the full Pair to add to your Lexus 700 or 600 Overland and Off-Road Set-up. Laser cut and powder coated for a strong durable finish attached to the 4Runner Lo-Profile Roof Rack or Modular Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your 4Runner. Available in Driver-Side, Passenger-Side or get the Set! *Disclaimer: MUST HAVE either the Lo-Profile Roof Rack OR Modular Roof Rack for the 700 or 600 by Westcott Designs to attach the molle panels. -
Westcott Designs rear hatch ladder for the 2024-2026 (1st Gen) INEOS Grenadier. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! -
2024-2026 INEOS Grenadier Front Door Molle Panels By Westcott Designs Check out the Westcott Designs Front Door Molle Panels for the 2024-2026 (1st Generation) INEOS Grenadier! Laser cut and powder coated for a strong durable finish attached to the INEOS Grenadier, it looks like it is a perfect match for this utility vehicle. With the Westcott Designs molle panels, you'll be able to mount various accessories and attachments to the side of your Grenadier for all the many adventures ahead of you! -
2024-2026 INEOS Grenadier Rear Window Molle Panels By Westcott Designs Check out the Westcott Designs Molle Panels for the 2024-2026 (1st Generation) INEOS Grenadier! Choose from Laser cut and powder coated for a strong durable finish attached directly to the vehicle. Includes Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your Grenadier!
