×
-
We are a full fab shop and a full production shop. Please give use a call on your small or large projects. You won't be disappointed you did. -
This high-quality men's Westcott Designs t-shirt puts a refined twist on a well-loved style. This men's logo T-Shirt is made with super soft luxurious fabric, with the Westcott Designs Logo on the front and the US flag on the sleeve. -
Westcott Designs Front Bumper Relocation Brackets for 2007 & Up Toyota Tundra. Enables you to run a 35” tall tire without trimming the bumper flange or inner fender liner. Laser cut out of .250” mild steel for a precise fit and powder coated black for durability that will last for years to come. Comes as a pack of four, (2) units required for each side to shim your bumper out a total of .500”. Duplicated to the factory OEM design to transfer the energy into the crumple zones in case of a frontal collision. Made in the U.S.A. and come with a Lifetime Warranty.- Compatible with both factory and most bolt-on accessory type bumpers
- Easy installation using existing OEM hardware
- Made in the U.S.A
- Lifetime Warranty
-
2024-2026 Toyota Tacoma Roof Rack by Westcott Designs™
Westcott Designs roof rack for the 2024-2026 Tacoma (4th Gen). Features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels. Westcott Designs roof rack for the all new 2024 Tacoma! New features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels.- No cut out visor
- Single row 40-inch light bar cut out
- Rigid Adapt light bar cut out
- (10) light 4” cut out
- Signature bottle openers with or without the truck logo
-
Westcott Designs Front Fender Liner Pullback Kit for 2021-2026 Chevy Tahoe & Suburban, GMC Yukon & Yukon XL SUV's. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 35" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
Westcott Designs Key Chain- Brushed Stainless
-
Westcott Designs Awning Brackets for Westcott Designs Roof Racks - Will also fit ARB, CVT, Ironman, Darche and other roof racks as well. IMPORTANT INFORMATION BELOW: 4th Gen Tacoma Westcott Designs Roof Racks have slightly thicker side rails. Please select the 4th Gen Tacoma in the drop down above to ensure you get the correct bracket. Please Choose from the Following Bracket Options:- 90 Degree Awning Brackets
- 180–270 Degree Awning Brackets
- 4th Gen Tacoma Westcott Designs Roof Rack 90 Degree Awning Brackets
- 4th Gen Tacoma Westcott Designs Roof Rack 180/270 Degree Awning Brackets
-
The FJ Cruiser spare tire relocation mount kit. It’s designed to allow the FJ to run up to a 35” spare tire and no have and clearance issues. It is built with high quality made parts all built in house. We take pride in making sure our products are to the highest quality. IMPORTANT: Minimum 106.1 MM Center Bore. **OPEN ENDED LUNG NUTS MAY BE REQUIRED** -
This is for a Bilstein TRD PRO (FRONT ONLY) (2015 - 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. This kit provides the following lifts:- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
-
IN STOCK & READY TO SHIP!! - - Westcott Designs rear hatch ladder for the 2025-2026 Toyota 4Runner (6th Gen). Construction is all aluminum to keep it light weight. The uprights are double layered 3/16 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market!Westcott Designs Ladder Features
- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Westcott Designs Toyota TRD PRO Grill Upper Light Bar Bracket Kit. This bracket kit allows you to mount a 20" light bar of your choice with your TRD PRO grill conversion in your new 2022-2026 Tundra or 2023-2026 Sequoia. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and comes with complete hardware for an easy installation. We have test fit and verified fitment of Rigid Industries SR series, Baja Designs S8 and Heretic brand light bars, may fit other brands as well but not verified at this time. Be sure to check out our front camera relocation bracket as well that will complete your grill conversion as needed. *Light bar not included -
2024-2026 Toyota Tacoma Bed Stiffeners by Westcott Designs™
Westcott Designs Bed Stiffeners for the all new 2024-2026 Tacoma! Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware including the stainless steel badging to add a little "bling" to your bed! -
Westcott Designs 2016-2023 Tacoma TRD Sport preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2016-2023 Tacoma TRD Sport: 3” (front lift) and 1" (rear lift)
-
- Westcott Designs 4Runner TRD PRO FOX (FRONT ONLY) lift kit for the 2021-2024 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load.
- 2021-2024 4runner: 1.6-1.7” (front lift)
-
--- Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:- 4Runner: 3” (front lift) and 1.25” (rear lift)
- Tacoma: 3” (front lift) and 1” (rear lift)
- Tundra: 3” (front lift) and 1” (rear lift)
-
*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs NEW TRD PRO 4Runner 2” (FRONT ONLY) lift kit for the 2021-'24 model years. This kit is designed to give you an additional 2” front only lift rather than our standard 1.5” lift. The intention of this kit is to enable you to either run a larger tire (Up to a 285/75R17) or to help correct the ride height of your TRD PRO if you add additional front-end weight with a bumper and/or winch. *If you are looking to use this kit to lift your 4Runner to run the larger tire options, you will need to run a 2” rear spring so the vehicle will sit correctly front to rear. We use and have had a lot of luck with either Icon (#52700) or OME (#2895) springs. All Westcott Designs products are proudly manufactured in-house to the highest specifications. All our preload collar lift kits are CNC machined out of billet aluminum and are hard anodized black or are available in raw aluminum finish as well. This kit provides the following lifts:
- 2021-'24 4Runner: 2” (front lift only)
-
2023-2026 Toyota Sequoia Rear Hatch Ladder by Westcott Designs Westcott Designs rear hatch ladder for the all new 2023-2026 Toyota Sequoia! Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! SEQUOIA LADDER MOUNT TEMPLATE How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- Due to high volume of orders, new orders ship within 3-4 weeks of date of order placed.
-
2024-2026 Toyota Land Cruiser Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the 2024-2026 Toyota Land Cruiser. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached at both the All-New 2024-2026 Toyota Land Cruiser Full-Modular Roof Rack and two 4.5” Industrial Vacuum Pump Suction Mounts included. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set! -
Westcott Designs Modular Carrier Rack. Universal fit works in any 2” or 2.5" standard receiver. Features a dual side design to allow the user the ability to add on or remove equipment as needed on the go. Tire arm is available with either dual, left, right or center mount offset. Carrier arm is built out of 3"x2" box .120" wall tubing and the tire arm is built out of 1.75" diameter .120" wall DOM tubing. Tire carrier features a wheel mounted attachment system with multiple different lug patterns available to accommodate most popular patterns. Multiple options for arms that include additional left spare tire rack, optional cooler rack with worktable, grill mount and more!* Pass through receiver tow hitch, rated to tow up to 10,000lbs. and feature secure CNC cut dove tail attachment points for arm(s). All carrier racks feature our Westcott anti wobble wedge (US patent #10,661,722) receiver hitch that ensures your equipment stays put no matter what kind of abuse you put it through. *Coming soon Please confirm your lug pattern before placing your order by using this quick tool here - https://tiresize.com/bolt-pattern-finder/ If you don't see your lug pattern listed in the drop down selection please select the "custom" option and be sure to put a good phone number for your order so we can contact you for lug pattern specs needed.- Modular Design
- Accessory mount plate
- Fits up to a 37” tall tire
- Black powder coat finish
- Made in the U.S.A.
- Lifetime Warranty
-
All-New 6th Gen 2025-2026 Toyota 4Runner Molle Panels by Westcott Designs™ - Attaches to the 4Runner Modular Roof Rack Or 4Runner Lo-Profile Roof Rack Check out the Westcott Designs™ molle panels for the ALL-NEW 6th Gen 2025 Toyota 4Runner. You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland and Off-Road Set-up. Laser cut and powder coated for a strong durable finish attached to the 4Runner Lo-Profile Roof Rack or Modular Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your 4Runner. Available in Driver-Side, Passenger-Side or get the Set! *Disclaimer: MUST HAVE either the Lo-Profile Roof Rack OR Modular Roof Rack for the 4Runner by Westcott Designs™ to attach the molle panels to the 6th Gen 4Runner. -
NEW
2024-2026 Toyota Land Cruiser 3/4 Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the 2024-2026 Toyota Land Cruiser. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached to the 2024-2026 Toyota Land Cruiser 3/4 Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set! -
Check-Out the Westcott Designs Rock Sliders for the 2024-2026 Lexus GX 550. **IMPORTANT: Toyota has 2 different frames that come with ¹PRE-TAPPED HOLES and some that are NOT pre-tapped. Please check your frame and choose which Hardware Pack is going to work for your install:- Hardware Kit 1: Frame has pre-tapped holes (meaning they have threads or grooves cut into it allowing for a bolt or screw).
- Hardware Kit 2: Frame DOES NOT have pre-tapped holes. There may be holes but there are no threads/grooves to allow for a bolt to screw into the frame. In this case, you'll need Hardware Kit 2 which includes Blind Bolts. (if you have questions, please reach out to our team at 1-888-574-5270)
-
Full Length Roof Rack
Westcott Designs 2nd & 3rd Gen Tacoma roof rack. Features extruded aluminum cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”.All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Signature bottle openers
-
Westcott Designs rock sliders for 2007-'21 Toyota Tundra CrewMax, standard bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 15 degree), with or without top plates and a durable BK08 black powder coat finish. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs 4Runner Limited with XREAS preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-'24 4runner Limited : 3” (front lift) and 1.25” (rear lift)
-
Full Length Modular Roof Rack
Westcott Designs FJ Cruiser modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations by following the contour of the roof line. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
-
Westcott Designs rock sliders (With Kickout) for the 2022-2026 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2019-2020 Toyota 4Runner (5th Gen) Fox TRD PRO Lift Kit by Westcott Designs --- Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
2022-2026 Toyota Tundra No Kickout Rock Sliders Westcott Designs no kickout rock sliders for the 2022-2026 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Check out the ALL-NEW 6th Gen 2025+ Toyota 4Runner FRONT ONLY Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
2024-2026 Toyota Tacoma Ditch Light Brackets by Westcott Designs™
Westcott Designs™ A-pillar ditch light brackets for the 2024-2026 Toyota Tacoma (4th Gen)! CAD designed, laser cut, bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
Westcott Designs 2010-2024 4Runner SR5, TRD Off-Road, Trail, Venture & Premium Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-2024 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift)
-
Check out the 2024-2026 TOYOTA LAND CRUISER REAR HATCH LADDER by Westcott Designs Westcott Designs rear hatch ladder for the 2024-2026 Toyota Land Cruiser. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:
- 4Runner: 3” (FRONT ONLY)
- Tacoma: 3” (FRONT ONLY)
- Tundra: 3” (FRONT ONLY)
-
Westcott Designs Tacoma SR5/SR preload collar lift kit. This kit is designed for the 2005-2023 Tacoma SR5/SR with the black body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2005-2023 Tacoma SR5/SR: 3” (front lift) and 1" (rear lift)
-
Westcott Designs™ light bar brackets for the 2022-2026 3rd Gen Toyota Tundra & Sequoia. These brackets install behind your front grill and allow you to mount a 20" light bar of your choice. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and uses OEM hardware for a strong and solid mounting platform. We have test fit them with both the Rigid Industries SR series and Baja Designs S8 series light bars, should also accept other popular brands as well. *Light bar not included -
Westcott Designs AVS Link Arms give your 2025–2026 Lexus LX700 & LX600 the perfect boost by recalibrating the factory AHC suspension for additional lift across all ride modes—without sacrificing ride quality, comfort, or the premium Lexus driving experience. This is the cleanest, simplest way to achieve a more aggressive stance, level out the vehicle, and clear larger tires while maintaining full AHC functionality. -
SINGLE REAR ONLY Lift Puck - 1" or 1-5/8" - 2023-2026 Toyota Sequoia Westcott Designs REAR ONLY lift puck for the 2022-2026 Tundra & 2023-2026 Sequoia. Your choice of 1" or 1-5/8" of rear lift only on standard rear coil suspension equipped Tundra's & Sequoia's. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. Price for individual units, for a pair you need to order quantity of (2). *Do NOT attempt to stack pucks for more lift, you will damage other rear suspension components and it is extremely unsafe* -
Full Length Modular Roof Rack
Westcott Designs full length modular roof rack for the Lexus GX 470. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. We carefully design our racks to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile
- Aluminum Construction
- Signature bottle openers
-
Westcott Designs™ Bed Stiffeners for 2016-2023 Toyota Tacoma (3rd Gen). Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware for easy and clean installation. -
Westcott Designs rock sliders for 2nd & 3rd gen Toyota Tacoma Long Bed 4WD. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit short bed, see separate listing) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs FRONT ONLY preload collar lift kit for the all-new 2023-2026 Toyota Sequoia! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 3” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! -
Westcott Designs 200 Series Land Cruiser basket style modular roof rack insert. The low-profile design mounts to your existing roof rack rails and enables you to expand your cargo space for wherever your next adventure takes you. It features extrude honed cross bars, aluminum construction for light weight and steel mounting inserts for strength and to maximize load capacity. We offer the rack in standard black powder coat finish with a plain visor or in our special Heritage Edition which features bronze powder coat finish and our signature Heritage Edition engraved visor. Optional floor panel inserts sold separately. • Optional Heritage Edition Custom Color & Visor ($100 Additional) • Optional floor inserts Standard Black ($455 Additional) • Black or Bronze powder coat finish available -
2008-2021 Westcott Designs Front Only preload collar lift kit for the 200 series Toyota Land Cruiser (2008-'21). The kit features CNC machined lower preload collars with top spacer plates that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: • 2008-2021 LC200: 3.0” (front lift) -
2025-2026 Toyota 4Runner (6th Gen) Full-Length Modular Roof Rack by Westcott Designs
Check-out Westcott Designs full length modular roof rack for the 2025-2026 Toyota 4Runner (6th Gen). Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately. -
Westcott Designs AVS rear link arms for the 2022-2026 Tundra and 2023-2026 Sequoia. Gives you 7/8" of rear lift only on a rear air suspension equipped Tundra & Sequoia. Laser cut stainless steel, made in the U.S.A and come with a lifetime warranty. -
Westcott Designs NO KICK OUT rock sliders for 2nd & 3rd gen Toyota Tacoma Short Bed & Access Cab (4WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit double cab long bed, see separate listing) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable.