shopping

Westcott Designs™ molle side panel set for the Toyota Tacoma bed rack - 2nd & 3rd Gen Tacomas - 2005-2023 Model Years. Laser cut and powder coated for a strong durable finish. Designed to be used in conjunction with our Westcott Designs bed rack (Separate Listing). Allows you to mount various accessories and attachments to your bed rack. Available in 36" and 42" lengths depending on your particular needs. Includes complete hardware, designed and built in the USA. *Short bed trucks only accept a 36" Molle Panel*

Westcott Designs Bed Rack for 2^nd and 3^rd Generation Toyota Tacoma. Compatible with both 5.5’ and 6.5’ length beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36" and 42" lengths depending on your particular needs. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately *Short bed trucks only accept a 36" Molle Panel*

Full Length Modular Roof Rack

Westcott Designs full length modular roof rack for the Lexus GX 460. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.

• (6) light 6” cut out
• (10) light 4” cut out
• Single row 40-inch light bar cut out
• No cut out visor
• Signature bottle openers

Westcott Designs roof rack floor inserts for 200 Series Land Cruiser basket style roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs basket roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA

Westcott Designs 200 Series Land Cruiser basket style modular roof rack insert. The low-profile design mounts to your existing roof rack rails and enables you to expand your cargo space for wherever your next adventure takes you. It features extrude honed cross bars, aluminum construction for light weight and steel mounting inserts for strength and to maximize load capacity. We offer the rack in standard black powder coat finish with a plain visor or in our special Heritage Edition which features bronze powder coat finish and our signature Heritage Edition engraved visor. Optional floor panel inserts sold separately. • Optional Heritage Edition Custom Color & Visor ($100 Additional) • Optional floor inserts Standard Black ($455 Additional) • Black or Bronze powder coat finish available

2008-2021 Westcott Designs preload collar lift kit for the 200 series Toyota Land Cruiser. The kit features CNC machined lower preload collars, top spacer plates, and rear billet lift pucks that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: • 2008-2021 LC200: 3.0” (front lift) and 1.25” (rear lift)

Westcott Designs 2007-2021 Tundra TRD Off-Road preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After installing your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:

• 2007-2021 Tundra TRD Off-Road: 3” (front lift) and 1" (rear lift)

Westcott Designs Tacoma TRD Sport Front Only preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2016-2023 Tacoma TRD Sport: 3” (front lift)

Westcott Designs 2016-2023 Tacoma TRD Sport preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:

• 2016-2023 Tacoma TRD Sport: 3” (front lift) and 1" (rear lift)