- 2007-'21 Tundra SR5: 3” (front lift) and 1" (rear lift)
×
-
Westcott Designs Tundra SR5 preload collar lift kit. This kit is designed for the 2007-21’ Tundra sR5 with the standard black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift: -
Westcott Designs Tacoma SR5/SR preload collar lift kit. This kit is designed for the 2004-2023 Tacoma SR5/SR with the black body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2004-'23 Tacoma SR5/SR: 3” (front lift) and 1" (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Westcott Designs Tundra TRD Sport preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra TRD Sport: 3” (front lift) and 1" (rear lift)
-
Westcott Designs Tundra TRD Off-Road preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-2021 Tundra TRD Off-Road: 3” (front lift) and 1" (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
CURRENT LEAD TIMES: 6-8 WEEKS Westcott Designs Tacoma TRD Sport preload collar lift kit. This kit is designed for the 2004-'23 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2004-'23 Tacoma TRD Sport: 3” (front lift) and 1" (rear lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS Westcott Designs Tacoma TRD Off-Road preload collar lift kit. This kit is designed for the 2016-23’ Tacoma TRD Off-Road with the yellow body Bilstein TRD shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2016-23' Tacoma TRD Off-Road: 3” (front lift) and 1.00” (rear lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS This is for a Factory Fox TRD PRO, exclusively for the 2020-'23 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:- 2020-'23 Tacoma: 1.5” (front lift) and 1” (rear lift)
-
NEW
CURRENT LEAD TIMES: 6-8 WEEKS --- 2019-2020 Toyota 4Runner (5th Gen) Fox TRD PRO Lift Kit by Westcott Designs --- Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
NEW
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:- 4Runner: 3” (front lift) and 1.25” (rear lift)
- Tacoma: 3” (front lift) and 1” (rear lift)
- Tundra: 3” (front lift) and 1” (rear lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs Bilstein TRD PRO preload collar lift kit for model years 2015-2018, 4Runner, Tacoma, or Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
Westcott Designs Tundra SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra SR5 with black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra SR5: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS Westcott Designs Tacoma SR5/SR Front Only preload collar lift kit. This kit is designed for the 2004-'23 Tacoma SR5/SR with the black body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2004-'23 Tacoma SR5/SR: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs Tundra TRD Sport FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:
- 2007-'21 Tundra TRD Sport: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs Tundra TRD Off-Road FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:
- 2007-'21 Tundra TRD Off-Road: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS Westcott Designs Tacoma TRD Sport Front Only preload collar lift kit. This kit is designed for the 2004-'23 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2004-'23 Tacoma TRD Sport: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-23’ Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2016-23' Tacoma TRD Off-Road: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-2023 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire without a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not affect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:
- 2020-'23 Tacoma: 1.5” (front lift)
-
NEW
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
-
NEW
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:
- 4Runner: 3” (FRONT ONLY)
- Tacoma: 3” (FRONT ONLY)
- Tundra: 3” (FRONT ONLY)
-
CURRENT LEAD TIMES: 6-8 WEEKS This is for a Bilstein TRD PRO (FRONT ONLY) (2015 - 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. This kit provides the following lifts:
- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
-
NEW
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)