×
-
Westcott Designs rock sliders for the 2003-2009 4th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2004-2023 Westcott Designs Tacoma SR5/SR Front Only preload collar lift kit. This kit is designed for the 2004-2023 Tacoma SR5/SR with the black body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2004-2023 Tacoma SR5/SR: 3” (front lift)
-
Westcott Designs Tacoma SR5/SR preload collar lift kit. This kit is designed for the 2005-2023 Tacoma SR5/SR with the black body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2005-2023 Tacoma SR5/SR: 3” (front lift) and 1" (rear lift)
-
Westcott Designs 2005-2023 Tacoma TRD Off-Road preload collar lift kit. This kit is designed for the 2005-2023 Tacoma TRD Off-Road with the yellow body Bilstein TRD shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2005-2023 Tacoma TRD Off-Road: 3” (front lift) and 1.00” (rear lift)
-
Westcott Designs Front Bumper Relocation Brackets for 2007 & Up Toyota Tundra. Enables you to run a 35” tall tire without trimming the bumper flange or inner fender liner. Laser cut out of .250” mild steel for a precise fit and powder coated black for durability that will last for years to come. Comes as a pack of four, (2) units required for each side to shim your bumper out a total of .500”. Duplicated to the factory OEM design to transfer the energy into the crumple zones in case of a frontal collision. Made in the U.S.A. and come with a Lifetime Warranty.- Compatible with both factory and most bolt-on accessory type bumpers
- Easy installation using existing OEM hardware
- Made in the U.S.A
- Lifetime Warranty
-
Westcott Designs rock sliders for 2007-'21 Toyota Tundra CrewMax, standard bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 15 degree), with or without top plates and a durable BK08 black powder coat finish. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs rock sliders for FJ Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs Tundra 2007-2021 SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra SR5 with black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After installing you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra SR5: 3” (front lift)
-
Westcott Designs™ Tundra SR5 preload collar lift kit is designed for the 2007-2021 Toyota Tundra sR5 with the standard black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-2021 Tundra SR5: 3” (front lift) and 1" (rear lift)
-
Westcott Designs Tundra TRD Off-Road FRONT ONLY preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After installing you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-2021 Tundra TRD Off-Road: 3” (front lift)
-
Westcott Designs 2007-2021 Tundra TRD Off-Road preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After installing your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:
- 2007-2021 Tundra TRD Off-Road: 3” (front lift) and 1" (rear lift)
-
Westcott Designs Tundra TRD Sport FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-2021 Tundra TRD Sport: 3” (front lift)
-
Westcott Designs Tundra TRD Sport preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-2021 Tundra TRD Sport: 3” (front lift) and 1" (rear lift)
-
2008-2021 Westcott Designs preload collar lift kit for the 200 series Toyota Land Cruiser. The kit features CNC machined lower preload collars, top spacer plates, and rear billet lift pucks that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: • 2008-2021 LC200: 3.0” (front lift) and 1.25” (rear lift) -
2008-2021 Westcott Designs Front Only preload collar lift kit for the 200 series Toyota Land Cruiser (2008-'21). The kit features CNC machined lower preload collars with top spacer plates that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: • 2008-2021 LC200: 3.0” (front lift)
-
Westcott Designs 200 Series Land Cruiser basket style modular roof rack insert. The low-profile design mounts to your existing roof rack rails and enables you to expand your cargo space for wherever your next adventure takes you. It features extrude honed cross bars, aluminum construction for light weight and steel mounting inserts for strength and to maximize load capacity. We offer the rack in standard black powder coat finish with a plain visor or in our special Heritage Edition which features bronze powder coat finish and our signature Heritage Edition engraved visor. Optional floor panel inserts sold separately. -
Check out the Westcott Designs molle panels for the 2010-2024 (5th Gen) Toyota 4Runner. You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland Set-up. -
Check-out the 2010-2024 4Runner (5th Gen) Limited with XREAS Preload Collar Lift Kit (FRONT ONLY) Westcott Designs 4Runner Limited with XREAS Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. -
Westcott Designs 4Runner Limited with XREAS preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-'24 4runner Limited : 3” (front lift) and 1.25” (rear lift)
-
Westcott Designs 2010-2024 4Runner SR5, TRD Off-Road, Trail, Venture & Premium Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-2024 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift)
-
Westcott Designs NO KICKOUT rock sliders for the 2010-2024 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs™ Rock Sliders for the 2010-2024 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2010-2025 Toyota 4Runner (5th Gen) - Westcott Designs ARB Compressor Mount
Elevate your off-road setup with the Westcott Designs ARB Compressor Mount, designed to deliver unparalleled durability and functionality. Crafted with precision using the highest quality materials, this mount ensures a secure and reliable fit for your ARB compressor. -
Toyota 4Runner 2010-2024 (5th Gen) Full-Length Modular Roof Rack by Westcott Designs
Westcott Designs full length modular roof rack for the (2010-'24) 5th generation 4Runner. Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately. **TRD PRO models require new factory OEM bolts to attach the rack to the roof of the vehicle (Part #63230-42010) available separately below. -
Westcott Designs NO KICK OUT rock sliders for 2010-2024 5th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. These No Kick Out sliders have a sleeker design that follow the body line of the vehicle more and give it a nice smooth look. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2010-2024 Toyota 4Runner (5th Gen) Switch Pros Module Engine Bay Mount
The Westcott Designs Switch Pros Engine Bay Module Mount offers a sleek and efficient solution for mounting your Switch Pros module securely inside the engine bay of your 5th Gen Toyota 4Runner (Model Years: 2010-2024). Designed with precision and durability in mind, this custom-fit bracket simplifies installation, saving you time and effort while keeping your module organized and protected. Constructed from high-quality materials, this mount ensures a clean, factory-like appearance and provides easy access for wiring and maintenance. Its tailored design allows it to integrate seamlessly into the engine bay, offering a secure attachment point without compromising the vehicle's aesthetics or performance. Upgrade your Tacoma with this practical and stylish mounting solution, perfect for off-road enthusiasts and anyone looking to streamline their Switch Pros Installation. Upgrade your Tacoma with this practical and stylish mounting solution, perfect for off-road enthusiasts and anyone looking to streamline their Switch Pros Installation. -
Westcott Designs A-pillar ditch light brackets for 2010-'24 Toyota 4Runner 5th Gen. CAD designed, laser cut, and powder coated black for a durable finish. These are hands down the best built and strongest mounts out on the market. Some might even say overbuilt but we never would! Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. Low profile design mount incorporates our carriage bolt light mount which not only makes for a cleaner installed look but also reduces wind noise. Choose from a wide variety of light options to suit your specific needs*. *Lights not included. -
2010-2024 Toyota 4Runner 5th Gen Full Length Lo-Pro Roof Rack by Westcott Designs
Westcott Designs full length lo-pro roof rack for the (2010-2024) 5th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately. *TRD PRO models require new factory OEM bolts to attach the rack to the roof of the vehicle (Part #63230-42010) available separately below. -
Westcott Designs rock sliders for the 2010-2024 5th generation 4runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
--- 2010-2024 Toyota 4Runner Lift Kit - SR5, TRD Off-Road, Trail, Venture & Premium Check-out the Westcott Designs™ Preload Collar Lift Kit for the Toyota 4Runner SR5, TRD Off-Road, Trail, Venture & Premium. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.
-
2016-2023 Toyota Tacoma (3rd Gen) Switch Pros Module Engine Bay Mount
The Westcott Designs Switch Pros Engine Bay Module Mount offers a sleek and efficient solution for mounting your Switch Pros module securely inside the engine bay of your 3rd Gen Toyota Tacoma (Model Years 2016-2023). Designed with precision and durability in mind, this custom-fit bracket simplifies installation, saving you time and effort while keeping your module organized and protected. Constructed from high-quality materials, this mount ensures a clean, factory-like appearance and provides easy access for wiring and maintenance. Its tailored design allows it to integrate seamlessly into the engine bay, offering a secure attachment point without compromising the vehicle's aesthetics or performance. Upgrade your Tacoma with this practical and stylish mounting solution, perfect for off-road enthusiasts and anyone looking to streamline their Switch Pros Installation. -
Ditch Light Brackets
Westcott Designs Tacoma A-pillar ditch light mount kits are specifically designed to securely mount lights to OEM A-pillar/ditch locations. Fits 2016-'23 Tacoma CAD designed, laser cut and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. Low profile designed mount incorporates our carriage bolt light mount which not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
Westcott Designs 2016-2023 Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2016-23' Tacoma TRD Off-Road: 3” (front lift)
-
Westcott Designs Tacoma TRD Sport Front Only preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2016-2023 Tacoma TRD Sport: 3” (front lift)
-
Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
-
Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not affect your suspension travel. After installing your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed, and you can run up to a 33” tire without a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
--- Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
-
2019-2020 Toyota 4Runner (5th Gen) Fox TRD PRO Lift Kit by Westcott Designs --- Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
-
Full Length Lo-Pro Roof Rack for the 2019-2025 Toyota RAV4
Westcott Designs full length lo-pro roof rack for the 2019-2025 5th generation Toyota RAV4. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately. -
This is for a Factory Fox TRD PRO, exclusively for the 2020-2022 Toyota Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop. This kit provides the following lifts:- 2020-2022 Toyota Sequoia: 1.5” (front lift) and 1” (rear lift)
-
This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-2022 Toyota Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop. This kit provides the following lifts:
- 2020-2022 Toyota Sequoia: 1.5” (front lift)
-
This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-2023 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire without a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not affect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:
- 2020-'23 Tacoma: 1.5” (front lift)
-
This is for a Factory Fox TRD PRO, exclusively for the 2020-2023 Toyota Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:
- 2020-2023 Toyota Tacoma: 1.5” (front lift) and 1” (rear lift)
-
Check-Out the Westcott Designs GMC 2500 HD Front Torsion Bar Key Leveling Kit. Level the front of your GMC 2500HD/3500HD truck for more tire clearance and a more rugged stance with the Westcott Designs Torsion Bar Keys. Torsion bar keys can used to set the ride height of the front of the truck and are commonly used in leveling kits. It is important to set the height appropriately as to leave ample suspension droop travel to maintain a good ride quality. -
Check-Out the Westcott Designs GMC 3500 HD Front Torsion Bar Key Leveling Kit. Level the front of your GMC 2500HD/3500HD truck for more tire clearance and a more rugged stance with the Westcott Designs Torsion Bar Keys. Torsion bar keys can used to set the ride height of the front of the truck and are commonly used in leveling kits. It is important to set the height appropriately as to leave ample suspension droop travel to maintain a good ride quality.
-
*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs NEW TRD PRO 4Runner 2” (FRONT ONLY) lift kit for the 2021-'24 model years. This kit is designed to give you an additional 2” front only lift rather than our standard 1.5” lift. The intention of this kit is to enable you to either run a larger tire (Up to a 285/75R17) or to help correct the ride height of your TRD PRO if you add additional front-end weight with a bumper and/or winch. *If you are looking to use this kit to lift your 4Runner to run the larger tire options, you will need to run a 2” rear spring so the vehicle will sit correctly front to rear. We use and have had a lot of luck with either Icon (#52700) or OME (#2895) springs. All Westcott Designs products are proudly manufactured in-house to the highest specifications. All our preload collar lift kits are CNC machined out of billet aluminum and are hard anodized black or are available in raw aluminum finish as well. This kit provides the following lifts:- 2021-'24 4Runner: 2” (front lift only)
-
- Westcott Designs 4Runner TRD PRO FOX (FRONT ONLY) lift kit for the 2021-2024 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load.
- 2021-2024 4runner: 1.6-1.7” (front lift)
-
Check-out Westcott Designs™ Toyota 4Runner TRD PRO FOX lift kit for the 2021-2024 model years. The suspension has been redesigned and re-valved for 2021-2024 model years. They also redesigned the spring and lower spring perch as well. We tested this set up for a year and we can confidently say it's dialed-in, to say the least! Our kits are the highest quality kits on the market. We manufacture everything in-house to make sure the quality is top-notch. Our TRD PRO lift kits look nicer than OEM. That's right, get yourself an OEM+ look for your build. If you did not know what to look for you wouldn’t even know it wasn’t from the factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to give that OEM+ look. As for the rear, we CNC machine all of the parts and hard anodize them to have a great look and to maximize the life of them to make sure they outlast the vehicle. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you, but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load. This kit provides the following lifts:
- 2021-2024 4runner: 1.6-1.7” (front lift) and 1.25” (rear lift)
-
Westcott Designs roof rack floor inserts for 2021-2026 Chevy Tahoe modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. -
NEW
Current Lead Time: 3 Weeks -
2021-2026 Ford F-150 Raptor A-Pillar Ditch Light Brackets by Westcott Designs™
Add powerful auxiliary lighting to your 2021-2026 Ford F-150 Raptor with Westcott Designs A-Pillar Ditch Light Brackets. Designed for a factory-quality fit, these precision-engineered ditch light mounts securely position your favorite LED pod lights while maintaining a clean, low-profile appearance. Installation is completely bolt-on with no drilling required. -
Westcott Designs Front Fender Liner Pullback Kit for 2021-2026 GMC Yukon & Yukon XL and Chevy Tahoe & Suburban SUV's. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 35" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
**NEW PRODUCT ALERT - CURRENT LEAD TIME: 6-8 WEEKS** The Westcott Designs Modular Chase Rack for the 2021–2026 Ford F-150 Raptor is a fully configurable bed-mounted system engineered for serious off-road, overland, and desert builds. Designed to support single or dual spare tire setups, removable MOLLE panels, and corrosion-resistant stainless mounting tracks, this is next-level engineering for Gen 3 Raptor owners who demand versatility without compromise.
-
**NEW PRODUCT ALERT - CURRENT LEAD TIME: 6-8 WEEKS** The Westcott Designs™ Pre-Runner Front Bumper for the 2021–2026 Ford F-150 Raptor is a high-clearance, frame-cut bumper engineered for maximum approach angle and true desert performance. Available in two configurations — factory intercooler compatible or high-mount intercooler version — this system delivers a clean, factory-inspired fit with aggressive pre-runner styling and uncompromised functionality. -
Westcott Designs™ light bar brackets for the 2022-2026 3rd Gen Toyota Tundra & Sequoia. These brackets install behind your front grill and allow you to mount a 20" light bar of your choice. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and uses OEM hardware for a strong and solid mounting platform. We have test fit them with both the Rigid Industries SR series and Baja Designs S8 series light bars, should also accept other popular brands as well. *Light bar not included -
Westcott Designs AVS rear link arms for the 2022-2026 Tundra and 2023-2026 Sequoia. Gives you 7/8" of rear lift only on a rear air suspension equipped Tundra & Sequoia. Laser cut stainless steel, made in the U.S.A and come with a lifetime warranty. -
2022-2026 Toyota Tundra Ditch Light Brackets by Westcott Designs™
Check-out Westcott Designs’ A-pillar ditch light brackets for the 2022-2026 Toyota Tundra! They also work for the 2023-2026 Toyota Sequoia! CAD designed, laser cut & bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
2022-2026 Toyota Tundra Factory Air Bag Suspension Delete Kit - - Now you can upgrade your Toyota factory Air Ride suspension for the 2022-2026 Tundra or 2023-2026 Sequoia with Westcott Design’s Air Bag Delete kit! -
NEW
Check-Out the 2022-2026 Toyota Tundra Full-Length Lo-Pro Roof Rack This roof rack has a sleek design that hugs your existing roof line. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Includes (8) aluminum extruded cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails and complete hardware. *Lights sold separately -
Check-Out the 2022-2026 Toyota Tundra Full-Length Modular Roof Rack This roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Includes (8) aluminum extruded cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails and complete hardware. *Lights sold separately. *Please Note: This is a “Drill To Mount” roof rack and we suggest that you have professionally installed. We will not be held responsible for any damage to your vehicle. **Panoramic Roof Fitment Note: The basket configuration is not compatible with the Panoramic Sunroof. -
2022-2026 Toyota Tundra No Kickout Rock Sliders Westcott Designs no kickout rock sliders for the 2022-2026 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs rock sliders (With Kickout) for the 2022-2026 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs Front Tire Clearance Kit for the 2022-2026 Toyota Tundra. Enables you to run up to a 37" tire with full turning radius and clearance. Includes CNC laser cut weld in frame plates, inner fender well pull-back brackets and associated hardware to complete the job. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 37" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
2023-2026 Toyota Sequoia Ditch Light Brackets by Westcott Designs
Check-out Westcott Designs’ A-pillar ditch light brackets for the 2023-2026 Toyota Sequoia! They also work for the 2022-2026 Toyota Tundra! CAD designed, laser cut & bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
2023-2026 Toyota Sequoia Factory Air Ride Suspension Delete Kit - - Now you can upgrade your Toyota factory Air Ride suspension for the 2023-2026 Toyota Sequoia or the 2022-2026 Tundra with Westcott Design’s Air Bag Delete kit!
-
2023-2026 Toyota Sequoia Full Length Lo-Pro Roof Rack
Westcott Designs™ full length lo-pro roof rack for the all new 2023-2026 Toyota Sequoia. This lo-profile roof rack has a sleek design that hugs your existing roof line and minimizes additional vehicle height. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 2.5"T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Not compatible with Panoramic sunroof equipped vehicles -
Full Length Modular Roof Rack Westcott Designs full length modular roof rack for the all-new 2023-2026 Toyota Sequoia. Designed to accommodate models with the *panoramic sunroof and for users that desire the optional floor inserts to increase your cargo space. The modular rack measures 4.5” tall to allow for full function of the standard and panoramic sunroof. Features aluminum construction for light weight (49.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 4.5” T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Optional floor inserts available
- Signature bottle openers
- Made in the U.S.A.
- All aluminum construction
- Choice of visor
- Lo-Pro model also available, see separate listing
-
Westcott Designs roof rack floor inserts for 2023-2026 Toyota Sequoia modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. *Not compatible with the Lo-Pro model roof rack -
Westcott Designs rock sliders for the all new 2023-2026 Toyota Sequoia. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs Switch Pros Keypad Bracket for 2023-2026 Toyota Sequoia
The Westcott Designs Switch Pros Keypad Bracket is the perfect interior mounting solution for your 3rd Gen or 2023-2026 Toyota Sequoia. The bracket provides a secure and convenient way to access your Switch Pros keypad. Designed specifically for a clean and seamless installation, this bracket ensures quick access to the buttons and controls for all your accessories wired to the Switch Pros module. Milled from Billet Aluminum with precision craftsmanship, this bracket is designed to fit perfectly within the Toyota Sequoia interior, offering a professional, factory-like appearance. Whether controlling lights, winches or other auxiliary systems, the ergonomic positioning of the keypad allows for easy, distraction-free operation while driving. Upgrade your truck with the Westcott Designs Switch Pros Keypad Bracket for reliable functionality, enhanced convenience, and a polished look. -
Westcott Designs Front Tire Clearance Kit for the 2023-2026 Sequoia. Enables you to run up to a 37" tire with full turning radius and clearance. Includes CNC laser cut weld in frame plates, inner Fenderwell pull back brackets and associated hardware to complete the job. Made in the U.S.A. and comes with a Lifetime Warranty.
- Run up to a 37" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
Out of stock
Check-Out the 2024-2026 Chevy 2500 Bison AEV Bumper Light Bar from Westcott Designs™! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The Chevy 2500 Bison AEV Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
Check-Out the ALL New 2024+ GMC 2500 & 3500 AT4X Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The GMC 2500 AT4X Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength.
-
Check-Out the ALL New 2024-2026 GMC 2500 AT4X Bumper Light Bar (AEV Edition) from Westcott Designs™! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The GMC 2500 AT4x (AEV Edition) Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
2024-2026 INEOS Grenadier Front Door Molle Panels By Westcott Designs Check out the Westcott Designs Front Door Molle Panels for the 2024-2026 (1st Generation) INEOS Grenadier! Laser cut and powder coated for a strong durable finish attached to the INEOS Grenadier, it looks like it is a perfect match for this utility vehicle. With the Westcott Designs molle panels, you'll be able to mount various accessories and attachments to the side of your Grenadier for all the many adventures ahead of you! -
2024-2026 INEOS Grenadier Rear Door Molle Panels By Westcott Designs Check out the Westcott Designs Rear Door Molle Panels for the 2024-2026 (1st Generation) INEOS Grenadier! Laser cut and powder coated for a strong durable finish attached to the INEOS Grenadier, it looks like it is a perfect match for this utility vehicle. With the Westcott Designs molle panels, you'll be able to mount various accessories and attachments to the side of your Grenadier for all the many adventures ahead of you! -
2024-2026 INEOS Grenadier Rear Window Molle Panels By Westcott Designs Check out the Westcott Designs Molle Panels for the 2024-2026 (1st Generation) INEOS Grenadier! Choose from Laser cut and powder coated for a strong durable finish attached directly to the vehicle. Includes Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your Grenadier! -
2024-2026 INEOS Grenadier Roof Rack by Westcott Designs
Westcott Designs roof rack for the 2024-2026 (1st generation) INEOS Grenadier. Rack includes cross bars and a front wind visor. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. -
NEW
Checkout the 2024-2026 Lexus GX 550 3/4 Molle Panels by Westcott Designs™ - Attaches to the 2024-2026 Lexus GX 550 3/4 Roof Rack Check out the Westcott Designs™ molle panels for the 2024-2026 Lexus GX 550. You can choose Driver-Side, Passenger-Side or the full Pair to add to your GX 550 Overland set-up. Laser cut and powder coated for a strong durable finish attached to the All-New 2024-2025 Lexus GX 550 3/4 Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your All-New Lexus GX 550. -
Check Out the 2024-2026 Lexus GX 550 Ditch Light Brackets by Westcott Designs
Check-out Westcott Designs’ A-pillar ditch light brackets for the New 2024-2026 Lexus GX 550! CAD designed, laser cut & bent, and powder coated black for a durable finish. Easy install and uses OEM mounting hardware. This unique design placed the light right next to your side-view mirrors, making it seamlessly integrate into the design of your Land Cruiser and allow the light to be where you need it without obstructing your view in any way. *Lights not included, sold separately. -
Westcott Designs full length modular roof rack for the 2024-2026 Lexus GX550. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile Visor
- 10-Light Cut-Out Visor
- 42.5" Light Bar Cut-Out
- 43.375" Light Bar Cut-Out
- Signature bottle openers
-
2024-2026 Lexus GX 550 Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the All-New 2024-2026 Lexus GX 550. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached at both the All-New 2024 Lexus GX 550 Full-Modular Roof Rack and two 4.5” Industrial Vacuum Pump Suction Mounts included. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set! -
Check-Out the Westcott Designs Rock Sliders for the 2024-2026 Lexus GX 550. **IMPORTANT: Toyota has 2 different frames that come with ¹PRE-TAPPED HOLES and some that are NOT pre-tapped. Please check your frame and choose which Hardware Pack is going to work for your install:- Hardware Kit 1: Frame has pre-tapped holes (meaning they have threads or grooves cut into it allowing for a bolt or screw).
- Hardware Kit 2: Frame DOES NOT have pre-tapped holes. There may be holes but there are no threads/grooves to allow for a bolt to screw into the frame. In this case, you'll need Hardware Kit 2 which includes Blind Bolts. (if you have questions, please reach out to our team at 1-888-574-5270)
-
2024+ Lexus GX550 3/4 Roof Rack by Westcott Designs
Check-out Westcott Designs 3/4 roof rack for the 2024+ Lexus GX550. Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- No cut out visor
- Signature bottle openers
- Add-on option with floor panels
-
2024-2026 Toyota Land Cruiser Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the 2024-2026 Toyota Land Cruiser. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached at both the All-New 2024-2026 Toyota Land Cruiser Full-Modular Roof Rack and two 4.5” Industrial Vacuum Pump Suction Mounts included. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set! -
Westcott Designs Switch Pros Keypad Bracket for 2024-2026 Toyota Land Cruiser (LC 250)
The Westcott Designs Switch Pros Keypad Bracket is the perfect interior mounting solution for your new 2024-2026 Toyota Land Cruiser (LC 250). The bracket provides a secure and convenient way to access your Switch Pros keypad. Designed specifically for a clean and seamless installation, this bracket ensures quick access to the buttons and controls for all your accessories wired to the Switch Pros module. Milled from Billet Aluminum with precision craftsmanship and finished with Type 3 hard coat anodizing. This bracket is designed to fit perfectly within the Toyota Land Cruiser interior, offering a professional, factory-like appearance. Whether controlling lights, winches or other auxiliary systems, the ergonomic positioning of the keypad allows for easy, distraction-free operation while driving. Upgrade your truck with the Westcott Designs Switch Pros Keypad Bracket for reliable functionality, enhanced convenience, and a polished look. -
NEW
2024-2026 Toyota Land Cruiser 3/4 Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the 2024-2026 Toyota Land Cruiser. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached to the 2024-2026 Toyota Land Cruiser 3/4 Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set! -
2024+ Toyota Land Cruiser 3/4 Roof Rack by Westcott Designs
Check-out Westcott Designs 3/4 roof rack for the 2024+ Toyota Land Cruiser (LC250). Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- No cut out visor
- Signature bottle openers
- Add-on option with floor panels
-
Check Out the 2024-2026 Toyota Land Cruiser Ditch Light Brackets by Westcott Designs
Check-out Westcott Designs’ A-pillar ditch light brackets for the All-New 2024-2026 Toyota Land Cruiser! CAD designed, laser cut & bent, and powder coated black for a durable finish. Easy install and uses OEM mounting hardware. This unique design placed the light right next to your side-view mirrors, making it seamlessly integrate into the design of your Land Cruiser and allow the light to be where you need it without obstructing your view in any way. *Lights not included, sold separately. Designed for the Rigid Industries 4" 360 Series Light. **IMPORTANT: Download the attached Install Template PDF below. This will give you the exact drill locations to install your Westcott Designs 2024 Toyota Land Cruiser Ditch Light Brackets. -
2024-2026 Toyota Land Cruiser Full Length Modular Roof Rack by Westcott Designs
Westcott Designs full length modular roof rack for the all-new 2024-2026 Toyota Land Cruiser . This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile Visor
- Signature bottle openers
-
Check-out the Westcott Designs rock sliders for the all-new 2024-2026 Toyota Land Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2024-2026 Toyota Tacoma 2WD Short Bed Rock Sliders
Westcott Designs rock sliders for the 2024-2026 Toyota Tacoma Short Bed (2WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit 4WD models, see separate listing) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2024-2026 Toyota Tacoma 4WD Short Bed Rock Sliders by Westcott Designs
The Best Quality For Your New Truck!
Protect your 2024-2026 Tacoma Short Bed and elevate your off-road game with Westcott Designs premium rock sliders. Westcott Designs rock sliders for the 4th Gen Toyota Tacoma Short Bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2024-2026 Toyota Tacoma Bed Stiffeners by Westcott Designs™
Westcott Designs Bed Stiffeners for the all new 2024-2026 Tacoma! Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware including the stainless steel badging to add a little "bling" to your bed!
