- 2020-'23 Tacoma: 1.5” (front lift) and 1” (rear lift)
×
-
CURRENT LEAD TIMES: 6-8 WEEKS This is for a Factory Fox TRD PRO, exclusively for the 2020-'23 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts: -
CURRENT LEAD TIMES: 6-8 WEEKS --- Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:- 4Runner: 3” (front lift) and 1.25” (rear lift)
- Tacoma: 3” (front lift) and 1” (rear lift)
- Tundra: 3” (front lift) and 1” (rear lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs Bilstein TRD PRO preload collar lift kit for model years 2015-2018, 4Runner, Tacoma, or Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
Westcott Designs Front Leveling preload collar lift kit for the all-new 2023 Toyota Sequoia TRD Off-Road! This kit features CNC machined lower preload collars. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. Our Westcott kit gives you additional 2” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This lift kit is designed to level the stance of your ride front to rear and allows you run up to a 295/70R18 (34" tall) tire with minor trimming. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with any preload collar lift kits This kit provides the following lifts:- 2023 Sequoia TRD Off-Road: 2” (front lift)
- Lead times for new orders vary from 4-5 weeks for raw finish kits and 5-6 weeks for black anodize finish kits
-
Westcott Designs Front Leveling preload collar lift kit for the all-new 2023-'24 Toyota Sequoia TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. Our Westcott kit gives you additional 2” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This lift kit is designed to level the stance of your ride front to rear and allows you run up to a 35" tire with minor trimming. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! https://www.youtube.com/watch?v=r3qOlRBxZDg -
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs FRONT ONLY preload collar lift kit for the all-new 2022-'24 Toyota Tundra TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tundra PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 2.5” front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with purchase This kit provides the following lifts:- 2022-'24 Tundra Fox PRO suspension equipped trucks: 2.5” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Out of stock
With adjustability and durability, the 2-bike hitch rack stands up to your daily (and extraordinary) life.Built to fit a wide range of bikes
Go ahead—toss any bike in your stable on here. This rack holds tires up to 4.8 in. wide. Also, the articulated front cradle has 3 points of adjustability so you can get the handlebar and seatpost clearance you need. -
NEW
2023-2024 Toyota Sequoia Factory Air Ride Suspension Delete Kit - - Now you can upgrade your Toyota factory Air Ride suspension for the 2023-2024 Toyota Sequoia or the 2022-2024 Tundra with Westcott Design’s Air Bag Delete kit! -
NEW
2022-2024 Toyota Tundra Factory Air Bag Suspension Delete Kit - - Now you can upgrade your Toyota factory Air Ride suspension for the 2022-2024 Tundra or 2023-2024 Sequoia with Westcott Design’s Air Bag Delete kit!
-
CURRENT LEAD TIMES: 6-8 WEEKS --- Westcott Designs Front Only preload collar lift kit for the all-new 2023-'24 Toyota Sequoia! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 3” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! -
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs Front Only preload collar lift kit for the all-new 2022-'24 Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 3” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with any preload collar lift kits *Not compatible with AVS equipped rear trucks, see complete kit listing for purchase This kit provides the following lifts:- 2022-'24 Tundra static suspension equipped trucks: 3.0” (front lift)
-
Westcott Designs Front Only preload collar lift kit for the 200 series Toyota Land Cruiser (2008-'21). The kit features CNC machined lower preload collars with top spacer plates that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: • 2008-'21 LC200: 3.0” (front lift)- Raw aluminum kits ship within 4-5-weeks of date of order. Black anodized kits ship within 5-6-weeks of date of order
-
CURRENT LEAD TIMES: 6-8 WEEKS Westcott Designs 4Runner Limited with XREAS Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-'24 4Runner Limited : 3” (front lift)
- Lead times for new orders vary from 2-3 weeks for black anodize finish kits
-
*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs NEW TRD PRO 4Runner 2” (FRONT ONLY) lift kit for the 2021-'24 model years. This kit is designed to give you an additional 2” front only lift rather than our standard 1.5” lift. The intention of this kit is to enable you to either run a larger tire (Up to a 285/75R17) or to help correct the ride height of your TRD PRO if you add additional front-end weight with a bumper and/or winch. *If you are looking to use this kit to lift your 4Runner to run the larger tire options, you will need to run a 2” rear spring so the vehicle will sit correctly front to rear. We use and have had a lot of luck with either Icon (#52700) or OME (#2895) springs. All Westcott Designs products are proudly manufactured in-house to the highest specifications. All our preload collar lift kits are CNC machined out of billet aluminum and are hard anodized black or are available in raw aluminum finish as well. This kit provides the following lifts:- 2021-'24 4Runner: 2” (front lift only)
- Lead times for new orders vary from 2-3 weeks for black anodize finish kits
-
Westcott Designs Tundra SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra SR5 with black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra SR5: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS Westcott Designs Tacoma SR5/SR Front Only preload collar lift kit. This kit is designed for the 2004-'23 Tacoma SR5/SR with the black body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2004-'23 Tacoma SR5/SR: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs Tundra TRD Sport FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra TRD Sport: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs Tundra TRD Off-Road FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra TRD Off-Road: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS Westcott Designs Tacoma TRD Sport Front Only preload collar lift kit. This kit is designed for the 2004-'23 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2004-'23 Tacoma TRD Sport: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-23’ Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2016-23' Tacoma TRD Off-Road: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs 4Runner SR5, TRD Off-Road, Trail, Venture & Premium Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2010-2024 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- *VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs 4Runner TRD PRO FOX (FRONT ONLY) lift kit for the 2021-'24 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load. This kit provides the following lifts:
- 2021-'24 4runner: 1.6-1.7” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-'23 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire without a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not affect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:
- 2020-'23 Tacoma: 1.5” (front lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-22' Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop. This kit provides the following lifts:
- 2020-22' Sequoia: 1.5” (front lift)
- Lead times for new orders vary from 1-2 weeks
-
CURRENT LEAD TIMES: 6-8 WEEKS Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:
- 4Runner: 3” (FRONT ONLY)
- Tacoma: 3” (FRONT ONLY)
- Tundra: 3” (FRONT ONLY)
-
CURRENT LEAD TIMES: 6-8 WEEKS This is for a Bilstein TRD PRO (FRONT ONLY) (2015 - 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. This kit provides the following lifts:
- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
-
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
-
This compact LED light can be used for virtually any lighting application - from off-road to agriculture. The SR-M utilizes the same technology as our D-Series, but is half the size and incorporates half the number of LED's. The size and shape of the SR-M LED Light allows it to fit almost anywhere. -
Westcott Designs Jerry Can Mount. Offered in either aluminum or steel construction and your choice of raw finish or powder coated black. These mounts are designed to be used with Wavian brand 20L Jerry Cans; see link below for more information. Laser cut and bent in house, strongest mount on the market and the best part is they are designed and built in the USA! Wavian website: https://wavianusa.com -
Cooler/Work Top Pans And Hardware
-
Jomax Customs ABS guards for 2nd Gen 2007-2021 Toyota Tundra. Protects your ABS sensors from the elements and harsh conditions of off roading. True bolt on design and uses your factory hardware. CNC machined out of 6061 Aircraft grade aluminum and anodized either candy apple red or gun metal grey. Incorporates machined cable routing system and specially designed “back drain” to ensure water and/or mud don’t contaminate the sensor. Compatible with both 2WD and 4WD vehicles, made in the USA. -
Jomax Customs ABS guards for 5th gen 4Runner. Protects your ABS sensors from the elements and harsh conditions of off roading. True bolt on design and uses your factory hardware. CNC machined out of 6061 Aircraft grade aluminum and anodized either candy apple red or gun metal grey. Incorporates machined cable routing system and specially designed “back drain” to ensure water and/or mud don’t contaminate the sensor. Compatible with both 2WD and 4WD vehicles, made in the USA. -
Jomax Customs ABS guards for 5th gen 4Runner. Protects your ABS sensors from the elements and harsh conditions of off roading. True bolt on design and uses your factory hardware. CNC machined out of 6061 Aircraft grade aluminum and anodized either candy apple red or gun metal grey. Incorporates machined cable routing system and specially designed “back drain” to ensure water and/or mud don’t contaminate the sensor. Compatible with both 2WD and 4WD vehicles, made in the USA.
-
Westcott Designs rear lift pucks for the new 2024 Tacoma that give you 3/4" of rear only lift. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. Price per pair. *Do NOT attempt to stack pucks for more lift, you will damage other rear suspension components and it is extremely unsafe* -
Westcott Designs Toyota TRD PRO Grill Upper Light Bar Bracket Kit. This bracket kit allows you to mount a 20" light bar of your choice with your TRD PRO grill conversion in your new 2022-'24 Tundra or 2023-'24 Sequoia. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and comes with complete hardware for an easy installation. We have test fit and verified fitment of Rigid Industries SR series, Baja Designs S8 and Heretic brand light bars, may fit other brands as well but not verified at this time. Be sure to check out our front camera relocation bracket as well that will complete your grill conversion as needed. *Light bar not included -
Westcott Designs rear lift pucks for 4th & 5th Generation Toyota 4Runner. Gives you 1.25" of rear lift only on standard rear coil suspension equipped 4Runner. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. -
NEW
Check-Out the Westcott Designs GM 3500 HD Front Torsion Bar Key Leveling Kit. Level the front of your GM 2500HD/3500HD truck for more tire clearance and a more rugged stance with the Westcott Designs Torsion Bar Keys. Torsion bar keys can used to set the ride height of the front of the truck and are commonly used in leveling kits. It is important to set the height appropriately as to leave ample suspension droop travel to maintain a good ride quality. -
NEW
Check-Out the Westcott Designs GM 2500 HD Front Torsion Bar Key Leveling Kit. Level the front of your GM 2500HD/3500HD truck for more tire clearance and a more rugged stance with the Westcott Designs Torsion Bar Keys. Torsion bar keys can used to set the ride height of the front of the truck and are commonly used in leveling kits. It is important to set the height appropriately as to leave ample suspension droop travel to maintain a good ride quality.
-
The FJ Cruiser spare tire relocation mount kit. It’s designed to allow the FJ to run up to a 35” spare tire and no have and clearance issues. It is built with high quality made parts all built in house. We take pride in making sure our products are to the highest quality. IMPORTANT: Minimum 106.1 MM Center Bore. **OPEN ENDED LUNG NUTS MAY BE REQUIRED** -
Installation Instructions Westcott Designs light bar brackets for the 2022-'24 Tundra & Sequoia. These brackets install behind your front grill and allow you to mount a 20" light bar of your choice. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and uses OEM hardware for a strong and solid mounting platform. We have test fit them with both the Rigid Industries SR series and Baja Designs S8 series light bars, should also accept other popular brands as well. *Light bar not included -
Out of stock
With adjustability and durability, the 2-bike hitch rack stands up to your daily (and extraordinary) life.
Built to fit a wide range of bikes
Go ahead—toss any bike in your stable on here. This rack holds tires up to 4.8 in. wide. Also, the articulated front cradle has 3 points of adjustability so you can get the handlebar and seatpost clearance you need.