×
-
Westcott Designs Bed Rack for 2nd and 3rd Generation Toyota Tacoma. Compatible with both 5.5’ and 6.5’ length beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36" and 42" lengths depending on your particular needs. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately *Short bed trucks only accept a 36" Molle Panel* -
Westcott Designs™ Bed Rack the 2022-2026 Toyota Tundra. Compatible with both 5.5’ and 6.6’ length beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36", 40" and 42" lengths to accommodate all configurations of accessories and bed lengths. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately -
Westcott Designs Bed Rack for the 4th Generation Toyota Tacoma. Compatible with both short and long beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. You'll also have your choice of the new Cab Height, where you can purchase the Roof Rack Extension to create a seamless roof rack from the Tacoma Roof Rack to the Bed Rack. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in short bed and long bed configurations. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately*- Molle Panels (Short Bed or Long Bed)
- Roof Rack Extension - which pairs with the 4th Gen Tacoma Roof Rack for a seamless rack from the roof to the end of the bed. Maximizing your space for long GFC tents and other accessories.
-
Westcott Designs™ Bed Stiffeners for 2016-2023 Toyota Tacoma (3rd Gen). Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware for easy and clean installation. -
ALL-NEW Westcott Designs Billet Rear Lower Trailing Arms for your 2024+ Toyota Land Cruiser (LC250). Like the upper-control arms, these are a Westcott First and adding to our lift and suspension line-up designed, engineered and built in-house here in Phoenix, AZ, right here in the US of A! That's right folks! This is machined down from a block of Billet Aluminum into this beautiful masterpiece that will not just LOOK amazing but perform above and beyond! This is TRUE OE+ upgrades! Order yours today! -
ALL-NEW Westcott Designs Billet Rear Lower Trailing Arms for your 2025-2026 Toyota 4Runner (6th Gen). Like the upper-control arms, these are a Westcott First and adding to our lift and suspension line-up designed, engineered and built in-house here in Phoenix, AZ, right here in the US of A! That's right folks! This is machined down from a block of Billet Aluminum into this beautiful masterpiece that will not just LOOK amazing but perform above and beyond! This is TRUE OE+ upgrades that you'll want to be first in line to get your hands on these beauties. They are available for PRE-ORDER TODAY! Don't miss your spot in line and pre-order yours today. -
ALL-NEW Westcott Designs Billet Rear Upper Trailing Arms for your 2023+ Toyota Sequoia (3rd Gen). These Upper Trailing Arms combine with the Lower Trailing Arms to provide greater strength, stability, control and dynamics off-road! -
ALL-NEW Westcott Designs Billet Rear Upper Trailing Arms for your 2023+ Toyota Tundra (3rd Gen). These Upper Trailing Arms combine with the Lower Trailing Arms to provide greater strength, stability, control and dynamics off-road! -
ALL-NEW Westcott Designs Billet Rear Upper Trailing Arms for your 2024+ Toyota Land Cruiser (LC250). These Upper Trailing Arms combine with the Lower Trailing Arms to provide greater strength, stability, control and dynamics off-road! -
ALL-NEW Westcott Designs Billet Rear Upper Trailing Arms for your 2025-2026 Toyota 4Runner (6th Gen). These Upper Trailing Arms combine with the Lower Trailing Arms to provide greater strength, stability, control and dynamics off-road!
-
Westcott Designs Switch Pros Keypad Bracket for 2020-2026 GMC 2500 & 3500
The Westcott Designs Switch Pros Keypad Bracket is the perfect interior mounting solution for your GMC 2500 0r 3500, providing a secure and convenient way to access your Switch Pros keypad. Designed specifically for a clean and seamless installation, this bracket ensures quick access to the buttons and controls for all your accessories wired to the Switch Pros module. Milled from Billet Aluminum with precision craftsmanship, this bracket is designed to fit perfectly within the GMC 2500's/3500's interior, offering a professional, factory-like appearance. Whether controlling lights, winches or other auxiliary systems, the ergonomic positioning of the keypad allows for easy, distraction-free operation while driving. Upgrade your truck with the Westcott Designs Switch Pros Keypad Bracket for reliable functionality, enhanced convenience, and a polished look. -
The Westcott Designs Billet Switch Pros Keypad Bracket is the perfect interior mounting solution for your 3rd Gen or 2022-2026 Toyota Tundra. The bracket provides a secure and convenient way to access your Switch Pros keypad. Designed specifically for a clean and seamless installation, this bracket ensures quick access to the buttons and controls for all your accessories wired to the Switch Pros module. Milled from Billet Aluminum with precision craftsmanship, this bracket is designed to fit perfectly within the Toyota Tundra interior, offering a professional, factory-like appearance. Whether controlling lights, winches or other auxiliary systems, the ergonomic positioning of the keypad allows for easy, distraction-free operation while driving. Upgrade your truck with the Westcott Designs Billet Switch Pros Keypad Bracket for reliable functionality, enhanced convenience, and a polished look. -
LEAD TIME: 3-4 Weeks Westcott Designs has put together an upgraded top hat made from Billet Aluminum for your 2024+ 4th Gen Toyota Tacoma. This takes your OE design to an OE+ form and function providing you with either a full billet replacement or a lift of 1/2" for higher clearance or leveling - your choice. -
LEAD TIME: 3-4 Weeks Westcott Designs has put together an upgraded top hat made from Billet Aluminum for your 2025-2026 6th Gen Toyota 4Runner. This takes your OE design to an OE+ form and function providing you with either a full billet replacement or a lift of 1" for higher clearance or leveling - your choice.
-
Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2024+ Toyota Land Cruiser (LC250). Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for. -
Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2024+ Lexus GX550. Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for.
-
Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2024-2026 Toyota Tacoma (4th Gen). Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for.
-
Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2025-2026 Toyota 4Runner (6th Gen). Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for.
-
--- Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:- 4Runner: 3” (front lift) and 1.25” (rear lift)
- Tacoma: 3” (front lift) and 1” (rear lift)
- Tundra: 3” (front lift) and 1” (rear lift)
-
Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:- 4Runner: 3” (FRONT ONLY)
- Tacoma: 3” (FRONT ONLY)
- Tundra: 3” (FRONT ONLY)
-
Westcott Designs Bilstein TRD PRO preload collar lift kit for model years 2015-2018, 4Runner, Tacoma, or Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
-
This is for a Bilstein TRD PRO (FRONT ONLY) (2015 - 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. This kit provides the following lifts:
- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
-
Cooler/Work Top Pans And Hardware -
2024-2026 Toyota Tacoma Ditch Light Brackets by Westcott Designs™
Westcott Designs™ A-pillar ditch light brackets for the 2024-2026 Toyota Tacoma (4th Gen)! CAD designed, laser cut, bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
2025-2026 Lexus LX 700 & 600 Series Ditch Light Brackets by Westcott Designs™
Westcott Designs™ A-pillar ditch light brackets for the 2025-2026 Lexus LX 700 & 600 Series! CAD designed, laser cut, bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs. *Lights not included. -
2025-2026 Toyota 4Runner (6th Gen) Ditch Light Brackets by Westcott Designs
Westcott Designs™ A-pillar ditch light brackets for the 6th Gen Toyota 4Runner! CAD designed, laser cut, bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs. *Lights not included. -
Out of stock
With adjustability and durability, the 2-bike hitch rack stands up to your daily (and extraordinary) life.Built to fit a wide range of bikes
Go ahead—toss any bike in your stable on here. This rack holds tires up to 4.8 in. wide. Also, the articulated front cradle has 3 points of adjustability so you can get the handlebar and seatpost clearance you need. -
NEW
Double up your fuel or water storage with the Westcott Designs Dual Jerry Can Mounting Bracket Set. Designed to work with Westcott Designs Jerry Can Mounts, this bracket kit allows you to securely position two Jerry Can Mounts side-by-side on compatible Westcott Designs Hitch Rack MOLLE panels. -
*IMPORTANT: NOT APPLICABLE ON AEV MODEL --- Westcott Designs Front Fender Liner Pullback Kit for 2020-2026 GM 1500 trucks. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 35" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
2020-2026 GMC 2500 & 3500 Fender Liner Pullback Kit - - *IMPORTANT: NOT NEEDED ON AEV MODEL ---Westcott Designs Front Fender Liner Pullback Kit for 2020-2026 GM 2500 & 3500 trucks. Enables you to run up to a 37" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 37" tall tire
- Easy installation and includes hardware
- Made in the U.S.A
- Lifetime Warranty
-
Westcott Designs Front Fender Liner Pullback Kit for 2021-2026 Chevy Tahoe & Suburban, GMC Yukon & Yukon XL SUV's. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 35" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
Full Length Modular Roof Rack
Westcott Designs FJ Cruiser modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations by following the contour of the roof line. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”. *Lights sold separately. -
Front Camera Relocation Bracket
Westcott Designs' front camera bracket allows you to transfer your factory OEM front camera from a standard Tundra or Sequoia grill to the OEM TRD PRO grill (Part# 53101-0C220). Why pay over $500 from the dealer as its only sold as a complete unit when you can spend just $19.95 here for the same result! Bracket is made of 100% stainless steel and comes in a durable black powder coat finish. *T6 torx driver required, not included. -
2022-2026 Toyota Tundra FRONT ONLY Preload Collar Lift Kit - SR5, Limited, Platinum, 1794, Hybrid, TRD Sport, TRD Off-Road Westcott Designs Front Only preload collar lift kit for the all-new 2022-2026 Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 2.5” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) How to Install:
