- 2004-'23 Tacoma TRD Sport: 3” (front lift) and 1" (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
×
-
Westcott Designs Tacoma TRD Sport preload collar lift kit. This kit is designed for the 2004-'23 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift: -
Westcott Designs Modular Carrier Rack. Universal fit works in any 2” standard receiver. Features a dual side design to allow the user the ability to add on or remove equipment as needed on the go. Tire arm is available with either center mount or right side offset. Carrier arm is built out of 3"x2" box .120" wall tubing and the tire arm is built out of 1.75" diameter .120" wall DOM tubing. Tire carrier features a wheel mounted attachment system with multiple different lug patterns available to accommodate most popular patterns. Multiple options for arms that include additional left spare tire rack, optional cooler rack with worktable, grill mount and more!* Pass through receiver tow hitch, rated to tow up to 10,000lbs. and feature secure CNC cut dove tail attachment points for arm(s). All carrier racks feature our Westcott anti wobble wedge (US patent #10,661,722) receiver hitch that ensures your equipment stays put no matter what kind of abuse you put it through. *Coming soon Please confirm your lug pattern before placing your order by using this quick tool here - https://tiresize.com/bolt-pattern-finder/ If you don't see your lug pattern listed in the drop down selection please select the "custom" option and be sure to put a good phone number for your order so we can contact you for lug pattern specs needed.- Modular Design
- Accessory mount plate
- Fits up to a 37” tall tire
- Black powder coat finish
- Made in the U.S.A.
- Lifetime Warranty
- Current lead times are 8-12 weeks on all new orders
-
Full Length Modular Roof Rack
Westcott Designs FJ Cruiser modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations by following the contour of the roof line. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Currently 4-6 week production lead time
-
Westcott Designs rock sliders for the 2003-'09 4th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. Options:- Raw HREW, MIG Welded - $725 a set.
- Raw DOM, MIG Welded - $849 a set.
- Raw DOM, TIG Welded - $1049 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Due to high volume of orders expect a 4-5-week lead time on all new orders.
-
Westcott Designs rock sliders for 2007-'21 Toyota Tundra CrewMax, standard bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 15 degree), with or without top plates and a durable BK08 black powder coat finish. Options:- Raw HREW, MIG Welded - $1220 a set.
- Raw DOM, MIG Welded - $1370 a set.
- Raw DOM, TIG Welded - $1570 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $275.00 per set.
- Currently experiencing around an 5-6-week lead time on all new slider orders.
-
Westcott Designs rock sliders for 2nd & 3rd gen Toyota Tacoma Long Bed 4WD. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit short bed, see separate listing) Options:- Raw HREW, MIG Welded - $899 a set.
- Raw DOM, MIG Welded - $1049 a set.
- Raw DOM, TIG Welded - $1249 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Currently experiencing around an 3-4-week lead time on all new slider orders.
-
Westcott Designs rock sliders for 2nd & 3rd gen Toyota Tacoma Short Bed & Access Cab (4WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit double cab long bed, see separate listing) Options:- Raw HREW, MIG Welded - $849 a set.
- Raw DOM, MIG Welded - $999 a set.
- Raw DOM, TIG Welded - $1199 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Currently experiencing around an 3-4-week lead time on all new slider orders.
-
Westcott Designs rock sliders for the 2010-'24 5th generation 4runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) -
Westcott Designs Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-23’ Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2016-23' Tacoma TRD Off-Road: 3” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
*Verified to fit '24 model year* Westcott Designs 4Runner SR5, TRD Off-Road, Trail, Venture & Premium Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-'24 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Westcott Designs Tacoma TRD Off-Road preload collar lift kit. This kit is designed for the 2016-23’ Tacoma TRD Off-Road with the yellow body Bilstein TRD shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2016-23' Tacoma TRD Off-Road: 3” (front lift) and 1.00” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Westcott Designs Bed Stiffeners for 3rd Gen Tacoma. Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware for easy and clean installation. -
Front Camera Relocation Bracket
Westcott Designs front camera relocation bracket allows you to transfer your factory camera into an OEM TRD PRO grill. Why pay over $500 from the dealer as its only sold as a complete unit when you can spend just $19.95 here for the same result! *This mount ONLY works on an OEM TRD PRO grill. -
Westcott Designs rock sliders for FJ Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. Options:- Raw HREW, MIG Welded - $725 a set.
- Raw DOM, MIG Welded - $849 a set.
- Raw DOM, TIG Welded - $1049 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around)
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Currently experiencing around an 4-5-week lead time on all new slider orders.
-
Westcott Designs roof rack floor inserts for 5th gen 4Runner modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. *Not compatible with the lo-pro model -
Ditch Light Brackets
Westcott Designs Tacoma A-pillar ditch light mount kits are specifically designed to securely mount lights to OEM A-pillar/ditch locations. Fits 2016-'23 Tacoma CAD designed, laser cut and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. Low profile designed mount incorporates our carriage bolt light mount which not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs 4Runner TRD PRO FOX (FRONT ONLY) lift kit for the 2021-'24 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load. This kit provides the following lifts:- 2021-'24 4runner: 1.6-1.7” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:- 4Runner: 3” (FRONT ONLY)
- Tacoma: 3” (FRONT ONLY)
- Tundra: 3” (FRONT ONLY)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:- 4Runner: 3” (front lift) and 1.25” (rear lift)
- Tacoma: 3” (front lift) and 1” (rear lift)
- Tundra: 3” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Full Length Modular Roof Rack
Westcott Designs 2nd & 3rd Gen Tacoma modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”.All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Signature bottle openers
- Currently 4-6 week production lead time
-
*Verified to fit '24 model year* Westcott Designs 4Runner SR5, TRD Off-Road, Trail, Venture & Premium preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2010-'24 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift) and 1.25” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs 4Runner TRD PRO FOX lift kit for the 2021-'24 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. As for the rear, we CNC machine all of the parts and hard anodize them to have a great look and to maximize the life of them to make sure they outlast the vehicle. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load. This kit provides the following lifts:
- 2021-'24 4runner: 1.6-1.7” (front lift) and 1.25” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Full Length Modular Roof Rack
Westcott Designs full length modular roof rack for the (2010-'24) 5th generation 4Runner. Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately. **TRD PRO models require new factory OEM bolts to attach the rack to the roof of the vehicle (Part #63230-42010) available separately below. -
Westcott Designs 5th Gen (2010-'24) 4Runner rear hatch ladder. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 2-3-weeks of date of order placed.
-
Westcott Designs Jerry Can Mount. Offered in either aluminum or steel construction and your choice of raw finish or powder coated black. These mounts are designed to be used with Wavian brand 20L Jerry Cans; see link below for more information. Laser cut and bent in house, strongest mount on the market and the best part is they are designed and built in the USA! Wavian website: https://wavianusa.com -
The FJ Cruiser spare tire relocation mount kit. It’s designed to allow the FJ to run up to a 35” spare tire and no have and clearance issues. It is built with high quality made parts all built in house. We take pride in making sure our products are to the highest quality. -
This is for a Bilstein TRD PRO (FRONT ONLY) (2015 - 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. This kit provides the following lifts:- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-'23 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:- 2020-'23 Tacoma: 1.5” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and up to 3-4 weeks for black anodize finish kits
-
This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-22' Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop. This kit provides the following lifts:- 2020-22' Sequoia: 1.5” (front lift)
- Lead times for new orders vary from 1-2 weeks
-
This is for a Factory Fox TRD PRO, exclusively for the 2020-22' Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop. This kit provides the following lifts:- 2020-22' Sequoia: 1.5” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks
-
Westcott Designs Bilstein TRD PRO preload collar lift kit for model years 2015-2018, 4Runner, Tacoma, or Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:
- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
This is for a Factory Fox TRD PRO, exclusively for the 2020-'23 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:
- 2020-'23 Tacoma: 1.5” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and up to 2-3 weeks for black anodize finish kits
-
Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and around 2-3 weeks for black anodize finish kits
-
Our high quality Wheel Stands allow you to adjust the suspension with ease. With these stands you can string, square, check angles and make all the necessary adjustments. This listing is for a pair of stands. -
Westcott Designs Key Chain- Brushed Stainless
-
TRD Pro Truck Bed Vinyl Inserts compatible with Toyota Tundra 2015-22'- SET OF TWO - For both sides of the bed.
- FLUSH/FLAT LETTERS - Made of high quality vinyl.
- WEATHER AND CAR WASH SAFE - Excellent resistance to long-term exposure to sunlight and weathering.
- SIMPLE INSTALLATION - Made easy with die cut backing that keeps spacing exact every time.
- MADE IN THE USA
-
Out of stock
Equip your truck with this Tundra Prerunner Rear Bumper to protect your truck’s rear in style. Sporting a rugged build, this bumper makes your truck look more aggressive, letting it stand from the crowd. Aside from its attention-grabbing style, this rear bumper offers excellent rear-end protection by deflecting rocks, branches, and other off-road debris. -
Out of stock
Equip your truck with this Tundra Prerunner Rear Bumper to protect your truck’s rear in style. Sporting a rugged build, this bumper makes your truck look more aggressive, letting it stand from the crowd. Aside from its attention-grabbing style, this rear bumper offers excellent rear-end protection by deflecting rocks, branches, and other off-road debris. -
This high-quality Westcott Designs t-shirt puts a refined twist on a well-loved style. "Stop Staring at My Rack" Women's T-shirt is made with super soft luxurious fabric, with the Westcott Designs logo on the back and US flag on the sleeve. -
This high-quality men's Westcott Designs t-shirt puts a refined twist on a well-loved style. This men's logo T-Shirt is made with super soft luxurious fabric, with the Westcott Designs truck grill on the front, rack graphic on the back and US flag on the sleeve. -
This high-quality men's Westcott Designs t-shirt puts a refined twist on a well-loved style. This men's logo T-Shirt is made with super soft luxurious fabric, with the Westcott Designs truck grill on the front, rack graphic on the back and US flag on the sleeve. -
This high-quality men's Westcott Designs t-shirt puts a refined twist on a well-loved style. This men's logo T-Shirt is made with super soft luxurious fabric, with the Westcott Designs truck grill on the front, rack graphic on the back and US flag on the sleeve. -
Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and around 2-3 weeks for black anodize finish kits
-
Out of stock
We guarantee no movement with our Patent Pending technology.
-
We are a full fab shop and a full production shop. Please give use a call on your small or large projects. You won't be disappointed you did. -
Note: all tabs and plates are all laser cut to give our customer the highest quality and most precise of parts as possible. We are a full fab shop and a full production shop. Please give use a call on your small or large projects. You won't be disappointed you did. In house 3K fiber table laser. In house 3K fiber tube laser. In house Robotic welder We have some of the top fabricators and welders in the country.
-
Note: all tabs and plates are all laser cut to give our customer the highest quality and most precise of parts as possible. We are a full fab shop and a full production shop. Please give use a call on your small or large projects. You won't be disappointed you did. In house 3K fiber table laser. In house 3K fiber tube laser. In house Robotic welder We have some of the top fabricators and welders in the country.
-
Note: all tabs and plates are all laser cut to give our customer the highest quality and most precise of parts as possible. We are a full fab shop and a full production shop. Please give use a call on your small or large projects. You won't be disappointed you did. In house 3K fiber table laser. In house 3K fiber tube laser. In house Robotic welder We have some of the top fabricators and welders in the country.
-
Rigid Industries Chase Brake Light, Turn Signal And Back Up W/Harness -
This compact LED light can be used for virtually any lighting application - from off-road to agriculture. The SR-M utilizes the same technology as our D-Series, but is half the size and incorporates half the number of LED's. The size and shape of the SR-M LED Light allows it to fit almost anywhere.
-
Your high lift jack is what gets you out of most of those messes. If you are stuck in a tight place, you can winch yourself right out. Having one around is a must-have , to keep you from being stranded out in the middle of nowhere.
-
Y-shaped, ratcheting tie-down strap lets you secure an oversize spare tire. Steel hooks with clasps prevent accidental detachment from anchor points. 6,000 lbs Max load. -
Cooler/Work Top Pans And Hardware
-
48" High Jack Extreme -
Universal Cooler/Tire Mount For 2 Additional Roto Pax
-
Out of stock
With adjustability and durability, the 2-bike hitch rack stands up to your daily (and extraordinary) life.Built to fit a wide range of bikes
Go ahead—toss any bike in your stable on here. This rack holds tires up to 4.8 in. wide. Also, the articulated front cradle has 3 points of adjustability so you can get the handlebar and seatpost clearance you need. -
SETTLE IN FOR SOME ME-TIME. Don't feel like sharing? The SingleNest understands. Pull the SingleNestout of its soft-ball-sized stuff sack, clip it to your handy-dandy Atlas Straps, and settle in for some me-time. Light enough to make the backpacker's cut, but robust enough for backyard luxury, the SingleNest is the go-to for any occasion.- 400lb Capacity
- Aluminum Wiregate Carabiners
- Heavy Duty Triple Stitched Seams
-
Out of stock
With adjustability and durability, the 2-bike hitch rack stands up to your daily (and extraordinary) life.
Built to fit a wide range of bikes
Go ahead—toss any bike in your stable on here. This rack holds tires up to 4.8 in. wide. Also, the articulated front cradle has 3 points of adjustability so you can get the handlebar and seatpost clearance you need. -
Out of stock
This Hitch Mount Rack comes equipped with a driver side tire mount arm and a passenger side grill mount arm. It has a Hi-Lift jack mount (Designed with the Hi-Lift X-Treme 48" Jack) with light tabs included (jack and lights are not included), auxiliary hitch receiver, and two stainless steel CNC bottle openers. *6-8 week production lead time on all new orders* Hitch Mount Rack with Cooler/Work Table & Grill Mount: Driver Side- Added Cooler Mount + Stainless Steel Work Table to the Tire Rack
- Base size of up to 32.125" length by 18.125" width. This also include the work top table
- Replaced Tire Rack with a Mount for a TREAGER® Grill (Ranger or Tailgater)
- Grill not included in price.
-
Out of stock
This Hitch Mount Rack comes equipped with a driver side cooler tray and work table arm and our standard passenger side tire rack. Included is a Hi-Lift jack mount (Designed with the Hi-Lift X-Treme 48" Jack), light tabs, 2" Y tire strap, auxiliary hitch receiver, and two stainless steel CNC bottle openers. The rack fits any standard 2” receiver and provides an auxiliary hitch receiver into the rack for towing. Both arms swing away from the vehicle allowing full function of the tailgate on both pickup trucks and SUV’s. Made in USA. *NO cooler included *6-8 week production lead time on all new orders* -
Out of stock
This Hitch Mount Rack comes equipped with a standard driver side tire rack and a passenger side grill mount arm. Included is a Hi-Lift jack mount (Designed with the Hi-Lift X-Treme 48" Jack), light tabs, 2" Y tire strap, auxiliary hitch receiver, and two stainless steel CNC bottle openers. The rack fits any standard 2” receiver and provides an auxiliary hitch receiver into the rack for towing. Both arms swing away from the vehicle allowing full function of the tailgate on both pickup trucks and SUV’s. Made in USA.- Replaced Tire Rack with a Mount for a TREAGER® Grill (Ranger or Tailgater)
- Grill not included
-
Out of stock
This Hitch Mount Rack comes equipped with standard driver and passenger side tire racks. The tire racks are designed to hold up to (2) 37" tall tires. Included is a Hi-Lift jack mount (Designed with the Hi-Lift X-Treme 48" Jack), light tabs, (2) 2" Y tire straps, auxiliary hitch receiver, and two stainless steel CNC bottle openers. The rack fits any standard 2” receiver and provides an auxiliary hitch receiver into the rack for towing. Both arms swing away from the vehicle allowing full function of the tailgate on both pickup trucks and SUV’s. Made in USA. *6-8 week production lead time on all new orders* -
Westcott Designs License Plate Mount for Westcott Designs Hitch Mount Racks with the following part numbers: 10001BK 10002BK-R 10002BK-T 10003BK-R 10003BK-T 10004BK **Does NOT fit the Single Tire Carrier rack, only fits the original dual arm hitch mount racks** Product Dimensions (in): 12 x 9.5 -
Mild Steel RotopaX Mounting tab. Weld on, 0.125 inch, 11 gauge, 3.175mm. -
Mild Steel Light Mounting tab. Weld on, 0.125 inch, 11 gauge, 3.175mm. -
Out of stock
This front bumper is design to fit 2014-2019 Toyota Tundra 4×4 and 2 wheel drive trucks. Great for Off-Road this bumper has a high clearance. Built to be functional and with a great look. Like no other Tundra bumper on the market.- (Lights are not included)
-
Out of stock
Grill Mount for Universal Hitch Mounted Rear Rack
Key Features
- Digital Elite controller keeps the preset temperature within +/- 20 degrees Fahrenheit for reliable cooking
- E-Z drain grease management system draws all of your excess liquids into a bucket underneath
- Versatile grill allows you to smoke, grill, bake, roast or braise for multiple cooking options
- Large capacity hopper allows you to hold up to 8 lbs of pellets at once
-
Mild Steel Tie Down Mounting tab. Weld on Size: 3 x 3 inches, 76.2mm x 76.2mm Thickness: 0.125 inch, 11 gauge, 3.175mm. -
Cooler 1" ratchet strap with snap hooks and soft tie made by SpeedStrap. Cushion grip ratchet and "S" hook with integrated retention clip. Includes a floating D-Ring on the opposite end to create an additional loop if needed. These ratcheting tie downs feature a sewn in soft tie for easy safe attachment. -
Tubing End Cap with Integrated Bottle Opener. Made out of stainless steel, CNC machined to exacting tolerances for a perfect fit every time. Designed for 1.75" x .120" round tubing. The outside diameter of the insert is 1.505". This is designed to be plug welded in. -
Steel hammock mounting poles. Our accessory Hammock Mount Kit works on all of our rack configurations. We recommend the single or double mask hammock from ENO. Product Dimensions: 16.5" top and 10.5"bottom piece This Hammock Mount has a 1.5" insert. -
Mild Steel Corner Gusset. Weld on, Size: 2.75 x 2.5 inches, 69.85mm x 63.5mm Thickness: 0.125 inch, 11 gauge, 3.175mm.
