Shop - Page 7 of 7 - Westcott Designs

2021-2024 4Runner Fox TRD PRO Lift Kit (FRONT ONLY)

Westcott Designs 4Runner TRD PRO FOX (FRONT ONLY) lift kit for the 2021-2024 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load.

This kit provides the following lifts:

2021-2024 4runner: 1.6-1.7” (front lift)

Select options Details Quick View

Bilstein 5100 Preload Collar Lift Kit (FRONT ONLY)

Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:

4Runner: 3” (FRONT ONLY)
Tacoma: 3” (FRONT ONLY)
Tundra: 3” (FRONT ONLY)

Note: This listing is for our preload collar lift kit only, this kit does NOT include shocks.

Select options Details Quick View

2019-2024 (5th Gen) Toyota 4Runner FOX TRD Pro Lift Kit

Bilstein 5100 Preload Collar Lift Kit

--- Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:

4Runner: 3” (front lift) and 1.25” (rear lift)
Tacoma: 3” (front lift) and 1” (rear lift)
Tundra: 3” (front lift) and 1” (rear lift)

Note: This listing is for our preload collar lift kit only, this kit does NOT include shocks.

Select options Details Quick View

Toyota Tacoma 2nd & 3rd Gen Roof Rack

Full Length Roof Rack

Westcott Designs 2nd & 3rd Gen Tacoma roof rack. Features extruded aluminum cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”.All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.

(6) light 6” cut out
(10) light 4” cut out
Single row 40-inch light bar cut out
No cut out visor
Signature bottle openers

Select options Details Quick View

2010-2024 Toyota 4Runner Lift Kit – SR5, TRD Off-Road, Trail, Venture & Premium

--- 2010-2024 Toyota 4Runner Lift Kit - SR5, TRD Off-Road, Trail, Venture & Premium Check-out the Westcott Designs™ Preload Collar Lift Kit for the Toyota 4Runner SR5, TRD Off-Road, Trail, Venture & Premium. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

Select options Details Quick View

2021-2024 Toyota 4Runner Fox TRD PRO Lift Kit

Check-out Westcott Designs™ Toyota 4Runner TRD PRO FOX lift kit for the 2021-2024 model years. The suspension has been redesigned and re-valved for 2021-2024 model years. They also redesigned the spring and lower spring perch as well. We tested this set up for a year and we can confidently say it's dialed-in, to say the least! Our kits are the highest quality kits on the market. We manufacture everything in-house to make sure the quality is top-notch. Our TRD PRO lift kits look nicer than OEM. That's right, get yourself an OEM+ look for your build. If you did not know what to look for you wouldn’t even know it wasn’t from the factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to give that OEM+ look. As for the rear, we CNC machine all of the parts and hard anodize them to have a great look and to maximize the life of them to make sure they outlast the vehicle. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you, but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load. This kit provides the following lifts:

2021-2024 4runner: 1.6-1.7” (front lift) and 1.25” (rear lift)

Select options Details Quick View

2010-2024 Toyota 4Runner modular roof rack with ten 4 inch rigid light cut out visor by westcott designs Top 3/4 view

2010-2024 Toyota 4Runner (5th Gen) Full-Length Modular Roof Rack

Toyota 4Runner 2010-2024 (5th Gen) Full-Length Modular Roof Rack by Westcott Designs

Westcott Designs full length modular roof rack for the (2010-'24) 5^th generation 4Runner. Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately. **TRD PRO models require new factory OEM bolts to attach the rack to the roof of the vehicle (Part #63230-42010) available separately below.

Select options Details Quick View

5th Gen 4Runner Westcott Designs Rear Hatch Ladder Version 1.0 Studio 1

5th Gen 4Runner Westcott Designs Rear Hatch Ladder Version 1.0 Lifestyle 3

Rear Hatch Ladder Version 1.0 – 2010-2024 Toyota 4Runner (5th Gen)

$565.47

The Classic Westcott Designs 5th Gen 4Runner Ladder & What's New for Version 2.0? We love our classic 5th Gen 4Runner Ladder Version 1.0, and so do so many customers. It's a solid design and still a huge contender on the market for anyone looking for a solid mounting ladder to access your 4Runner roof. This ladder has everything you need and more, so how do you improve on it? Dropping Weight. Even though the ladder is made from Aluminum, it's still is around 18 lbs. And, we found as the 4Runner aged, the OEM rear hatch struts sometimes struggled to open. There are aftermarket rear hatch strut upgrades (linked here) that we install in our own shop here in AZ that have worked well for us. But, as you know, Jeff Westcott is all about his customers and providing the best products. He's never satisfied. So, we made some slight design changes for Version 2.0. This new ladder (5th Gen 4Runner Ladder Version 2.0) follows our updated design language you'll see on our newest ladders for the GX550, LC250 or 6th Gen 4Runner. The new design is clean and a simple evolution from Version 1.0, but most importantly, it drops weight and gives our customers a lighter ladder without compromising on style, strength or function. Why keep version 1.0? Because, again, you the customer! We released Version 2.0 and we had calls that people liked the Version 1.0's design. They didn't care that it weighed more, they just liked the look. That's it! You got it! We get it ourselves. For being a company that's as much about function as it is design, we get it when you fall in love with a style or a look. So here it is. In all it's glory. Version 1.0 still available for order. Or, you can check out our All-New Version 2.0 HERE.

Full Length Roof Rack

Toyota 4Runner 2010-2024 (5th Gen) Full-Length Modular Roof Rack by Westcott Designs

Title

AMERICAN MADE // LIMITED LIFETIME WARRANTY