• Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear.

    This kit provides the following lifts:

    • 4Runner (2019-2020): 1.5” (front lift) 1.25″ (rear lift)
    • Tacoma (2017-2019): 1.5” (front lift) 1.0″ (rear lift)
    • Tundra (2018-2021): 1.5” (front lift) 1.0″ (rear lift)

    Installation video provided in the full description below.

    Select options
    Details Quick View
  • This is for a Factory Fox TRD PRO, exclusively for the 2020-2021 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 2020-2021 Tacoma: 1.5” (front lift) and 1” (rear lift)
    Select options
    Details Quick View
  • *VERIFIED TO FIT 2022 MODEL YEAR*

    Westcott Designs 4Runner TRD PRO FOX lift kit for the 2021-22′ model years. The suspension has been redesigned and re-valved for 2021-22′ model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. As for the rear, we CNC machine all of the parts and hard anodize them to have a great look and to maximize the life of them to make sure they outlast the vehicle. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load.

    This kit provides the following lifts:

    • 2021-22′ 4runner: 2” (front lift) and 1.25” (rear lift)
    Select options
    Details Quick View
  • Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences.

    This kit provides the following lifts:

    • 4Runner (2019-2020): 1.5” (front lift)
    • Tacoma (2017-2019): 1.5” (front lift)
    • Tundra (2018-2021): 1.5” (front lift)

    Installation video provided in the full description below.

    Select options
    Details Quick View
  • This is for a Bilstein TRD PRO (2015 – 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 4Runner (2015 – 2018): 1.5” (front lift) and 1.25” (rear lift)
    • Tacoma (2015 – 2016): 1.5” (front lift) and 1” (rear lift)
    • Tundra (2015 – 2017): 1.5” (front lift) and 1” (rear lift)
    Select options
    Details Quick View
  • Westcott Designs 4Runner SR5 & TRD Off-Road preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2010-2022 4runner SR5 and TRD: 3” (front lift) and 1.25” (rear lift)
    Select options
    Details Quick View
  • This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-2021 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 2020-2021 Tacoma: 1.5” (front lift)
    Select options
    Details Quick View
  • This is for a Factory Fox TRD PRO, exclusively for the 2020 & 2021 Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 2020 & 2021 Sequoia: 1.5” (front lift) and 1” (rear lift)
    Select options
    Details Quick View
  • Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing.  This is not your typical spacer lift that you hear horror stories about.  Our kit will not limit your suspension or bottom out prematurely.  It works the same way a coil over works just without being adjustable.  You will still retain the factory suspension geometry.  Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible.  We then hard anodized them to make them look better than factory.  With our kit you don’t have to max out your 5100 and can retain a great ride.  We make everything in house to make sure our quality is at the level our customers deserve.

    This kit provides the following lifts:

    • 4Runner: 3” (front lift) and 1.25” (rear lift)
    • Tacoma: 3” (front lift) and 1” (rear lift)
    • Tundra: 3” (front lift) and 1” (rear lift)

    Note: This listing is for our preload collar lift kit only, this kit does NOT include shocks.

    Select options
    Details Quick View
  • This is for a Bilstein TRD PRO (FRONT ONLY) (2015 – 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 4Runner (2015 – 2018): 1.5” (front lift)
    • Tacoma (2015 – 2016): 1.5” (front lift)
    • Tundra (2015 – 2017): 1.5” (front lift)
    Select options
    Details Quick View
  • *VERIFIED TO FIT 2022 MODEL YEAR*

    Westcott Designs 4Runner TRD PRO FOX (FRONT ONLY) lift kit for the 2021-22′ model years. The suspension has been redesigned and re-valved for 2021-22′ model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load.

    This kit provides the following lifts:

    • 2021-22′ 4runner: 2” (front lift)
    Select options
    Details Quick View
  • Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing.  This is not your typical spacer lift that you hear horror stories about.  Our kit will not limit your suspension or bottom out prematurely.  It works the same way a coil over works just without being adjustable.  You will still retain the factory suspension geometry.  Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible.  We then hard anodized them to make them look better than factory.  With our kit you don’t have to max out your 5100 and can retain a great ride.  We make everything in house to make sure our quality is at the level our customers deserve.

    This kit provides the following lifts:

    • 4Runner: 3” (FRONT ONLY)
    • Tacoma: 3” (FRONT ONLY)
    • Tundra: 3” (FRONT ONLY)

    Note: This listing is for our preload collar lift kit only, this kit does NOT include shocks.

    Select options
    Details Quick View
  • Westcott Designs Tacoma TRD Off-Road preload collar lift kit. This kit is designed for the 2016-21’ Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2016-2021 Tacoma TRD Off-Road: 3” (front lift) and 1.00” (rear lift)
    Add to cart
    Details Quick View
  • This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020 & 2021 Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory.

    The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop.

    This kit provides the following lifts:

    • 2020 & 2021 Sequoia: 1.5” (front lift)
    Select options
    Details Quick View
  • Westcott Designs Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-21’ Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2016-2021 Tacoma TRD Off-Road: 3” (front lift)
    Add to cart
    Details Quick View
  • Westcott Designs 4Runner SR5 & TRD Off-Road Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2010-2022 4runner SR5 and TRD: 3” (front lift)
    Select options
    Details Quick View
  • Westcott Designs preload collar lift kit for the 200 series Toyota Land Cruiser (2008-21’). The kit features CNC machined lower preload collars, top spacer plates, and rear billet lift pucks that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 295/70R18 tire without a Body Mount Chop (BMC) with minor trimming.

    This kit provides the following lifts:

    • 2008-21’ LC200: 3.0” (front lift) and 1.25” (rear lift)

    Select options
    Details Quick View
  • Westcott Designs Tacoma TRD Sport Front Only preload collar lift kit. This kit is designed for the 2004-21’ Tacoma TRD Sport with the blue body Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2004-2021 Tacoma TRD Sport: 3” (front lift)
    Add to cart
    Details Quick View
  • Westcott Designs Tacoma TRD Sport preload collar lift kit. This kit is designed for the 2004-21’ Tacoma TRD Sport with the blue body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA.

    This kit provides the following lift:

    • 2004-2021 Tacoma TRD Sport: 3” (front lift) and 1″ (rear lift)
    Add to cart
    Details Quick View

Title

Featured Products

Go to Top