×
-
Westcott Designs preload collar lift kit for the all-new 2022-2025 Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks and hard anodized black for a strong, durable finish. This kit gives you 2.5” of lift in the front and 1” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) *Now available for AVS/Air Ride and TRD Sport models, see drop down menu for options!* -
Westcott Designs preload collar lift kit for the all-new 2022-2026 Toyota Tundra TRD PRO & 1794 Limited equipped with Fox shocks! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tundra PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 2.5” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! -
2024-2026 Toyota Land Cruiser Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not affect your suspension travel. After installing your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed, and you can run up to a 33” tire without a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
2025-2026 Toyota 4Runner Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
Check out the 2024-2026 Lexus GX 550 Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
Check-out Westcott Designs™ Toyota 4Runner TRD PRO FOX lift kit for the 2021-2024 model years. The suspension has been redesigned and re-valved for 2021-2024 model years. They also redesigned the spring and lower spring perch as well. We tested this set up for a year and we can confidently say it's dialed-in, to say the least! Our kits are the highest quality kits on the market. We manufacture everything in-house to make sure the quality is top-notch. Our TRD PRO lift kits look nicer than OEM. That's right, get yourself an OEM+ look for your build. If you did not know what to look for you wouldn’t even know it wasn’t from the factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to give that OEM+ look. As for the rear, we CNC machine all of the parts and hard anodize them to have a great look and to maximize the life of them to make sure they outlast the vehicle. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you, but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load. This kit provides the following lifts:- 2021-2024 4runner: 1.6-1.7” (front lift) and 1.25” (rear lift)
-
This is for a Factory Fox TRD PRO, exclusively for the 2020-2023 Toyota Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:- 2020-2023 Toyota Tacoma: 1.5” (front lift) and 1” (rear lift)
-
Westcott Designs preload collar lift kit for the all-new 2023-2026 Toyota Sequoia TRD PRO! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. Our Westcott kit gives you additional 3” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset along with our clearance kit and BMC) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! -
Version 2.0! Westcott Designs 5th Gen (2010-2024) 4Runner rear hatch ladder 2.0! Construction is all aluminum to keep it light weight. The uprights are double layered and updated from the 1/4" to 3/16" aluminum to make them super rigid and dropping some weight in the process. We also enlarged the cutouts in the side rails and top plate to lose some weight without compromising rigidity and stability. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! -
Westcott Designs rock sliders for the 2010-2024 5th generation 4runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
The Classic Westcott Designs 5th Gen 4Runner Ladder & What's New for Version 2.0? We love our classic 5th Gen 4Runner Ladder Version 1.0, and so do so many customers. It's a solid design and still a huge contender on the market for anyone looking for a solid mounting ladder to access your 4Runner roof. This ladder has everything you need and more, so how do you improve on it? Dropping Weight. Even though the ladder is made from Aluminum, it's still is around 18 lbs. And, we found as the 4Runner aged, the OEM rear hatch struts sometimes struggled to open. There are aftermarket rear hatch strut upgrades (linked here) that we install in our own shop here in AZ that have worked well for us. But, as you know, Jeff Westcott is all about his customers and providing the best products. He's never satisfied. So, we made some slight design changes for Version 2.0. This new ladder (5th Gen 4Runner Ladder Version 2.0) follows our updated design language you'll see on our newest ladders for the GX550, LC250 or 6th Gen 4Runner. The new design is clean and a simple evolution from Version 1.0, but most importantly, it drops weight and gives our customers a lighter ladder without compromising on style, strength or function. Why keep version 1.0? Because, again, you the customer! We released Version 2.0 and we had calls that people liked the Version 1.0's design. They didn't care that it weighed more, they just liked the look. That's it! You got it! We get it ourselves. For being a company that's as much about function as it is design, we get it when you fall in love with a style or a look. So here it is. In all it's glory. Version 1.0 still available for order. Or, you can check out our All-New Version 2.0 HERE. -
*IMPORTANT NOTICE: Toyota has 2 different frames, some come with THREADED HOLES and other frames are NOT THREADED. Please check your frame and choose which Hardware Pack is going to work for your install. Any hardware change request post product being shipped will cost upwards of $160 + shipping to exchange. We want to be sure you get the right hardware and save you additional time and costs. Please be sure to check your frame prior to ordering. See the diagram below for guidance on how and where to check. If you have questions, please reach out to our Customer Service team at 1-888-574-5270. Westcott Designs rock sliders for the ALL-NEW 2025+ Toyota 4runner 6th generation. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
--- 2010-2024 Toyota 4Runner Lift Kit - SR5, TRD Off-Road, Trail, Venture & Premium Check-out the Westcott Designs™ Preload Collar Lift Kit for the Toyota 4Runner SR5, TRD Off-Road, Trail, Venture & Premium. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. -
Front Camera Relocation Bracket
Westcott Designs' front camera bracket allows you to transfer your factory OEM front camera from a standard Tundra or Sequoia grill to the OEM TRD PRO grill (Part# 53101-0C220). Why pay over $500 from the dealer as its only sold as a complete unit when you can spend just $19.95 here for the same result! Bracket is made of 100% stainless steel and comes in a durable black powder coat finish. *T6 torx driver required, not included. -
Front Camera Relocation Bracket
Westcott Designs front camera relocation bracket allows you to transfer your factory camera into an OEM TRD PRO grill. Why pay over $500 from the dealer as its only sold as a complete unit when you can spend just $19.95 here for the same result! *This mount ONLY works on an OEM TRD PRO grill. -
Westcott Designs Front Tire Clearance Kit for the 2022-2026 Toyota Tundra. Enables you to run up to a 37" tire with full turning radius and clearance. Includes CNC laser cut weld in frame plates, inner fender well pull-back brackets and associated hardware to complete the job. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 37" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
2024-2026 Toyota Tacoma Preload Collar Lift Kit
Westcott Designs preload collar lift kit for the all-new 2024-2026 Toyota Tacoma! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with the proper offset wheel. -
Westcott Designs preload collar lift kit for the all-new 2023-2026 Toyota Sequoia! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks and hard anodized black for a strong, durable finish. This kit gives you 2.5” of lift in the front and 1” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! Note: These new Sequoia's share a lot of the same suspension components as the new platform Tundra. If you need help figuring out what kit fits your specific model, please watch the link below to learn how to identify what kit you need. WHAT KIT DO I BUY? *Watch This Video* *Patent Pending *No shocks are included with any preload collar lift kits This kit provides the following lifts:- 2023-2026 Sequoia static suspension equipped trucks: 2.5” (front lift) and 1.00” (rear lift)
- 2023-2026 Sequoia AVS/Air Ride equipped trucks: 2.0" (front lift) and 7/8" (rear lift)
- WHAT KIT DO I BUY? *Watch This Video*
-
2022-2026 Toyota Tundra SINGLE Rear Lift Puck by Westcott Designs *Sold Individually* Westcott Designs SINGLE rear lift puck for the 2022-2026 Tundra & 2023-2026 Sequoia. Your choice of 1" or 1-5/8" of rear lift only on standard rear coil suspension equipped Tundra's & Sequoia's. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. Price for individual units, for a pair you need to order quantity of (2). *Do NOT attempt to stack pucks for more lift, you will damage other rear suspension components and it is extremely unsafe* -
Toyota 4Runner 2010-2024 (5th Gen) Full-Length Modular Roof Rack by Westcott Designs
Westcott Designs full length modular roof rack for the (2010-'24) 5th generation 4Runner. Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately. **TRD PRO models require new factory OEM bolts to attach the rack to the roof of the vehicle (Part #63230-42010) available separately below. -
2020-2026 GMC 2500 & 3500 Fender Liner Pullback Kit - - *IMPORTANT: NOT NEEDED ON AEV MODEL ---Westcott Designs Front Fender Liner Pullback Kit for 2020-2026 GM 2500 & 3500 trucks. Enables you to run up to a 37" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 37" tall tire
- Easy installation and includes hardware
- Made in the U.S.A
- Lifetime Warranty
-
*IMPORTANT: NOT APPLICABLE ON AEV MODEL --- Westcott Designs Front Fender Liner Pullback Kit for 2020-2026 GM 1500 trucks. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 35" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
2022-2026 Toyota Tundra FRONT ONLY Preload Collar Lift Kit - SR5, Limited, Platinum, 1794, Hybrid, TRD Sport, TRD Off-Road Westcott Designs Front Only preload collar lift kit for the all-new 2022-2026 Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 2.5” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) -
- PRICE DOES NOT INCLUDE THE TRD SHOCKS -
Westcott Designs TRD preload collar lift kit for the 2022-2026 Toyota Tundra! This conversion kit will fit ALL standard rear coil suspension model Tundra's (SR, SR5, Limited, Platinum & TRD Off-Road). This kit is designed to be used with the optional TRD shocks (#PTR13-34330) and struts (#PTR13-34310) that are available directly from Toyota. There is no need to spend thousands of dollars on this kit from your dealer when you can purchase it here for a fraction of the cost. We offer this kit in (2) different configurations, you can purchase it as a complete kit with shocks or you can purchase just our preload collar kit and source the shocks on your own from your local dealer. This kit features CNC machined lower preload collars, top shim plates, rear billet lift pucks and a brake like relocation bracket. These kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. These kits give you a true 3" of front lift and 1.5" of rear lift and ride better than factory! All kits come with complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory if not better ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset and our Westcott Designs Tundra Tire Clearance Kit) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Please note, you will need the Toyota TRD red axles in order to make this kit work, those part numbers are 43420-0C020 (Left) and 43410-0C020 (Right) which are available from your local Toyota dealer. *Patent Pending This kit provides the following lift:- 2022-'24 Tundra TRD suspension equipped trucks: 3.0” (front lift) and 1.50” (rear lift)
- This kit fits ALL standard rear coil suspension model Tundra's (SR, SR5, Limited, Platinum, & TRD Off-Road)
-
2010-2024 Toyota 4Runner 5th Gen Full Length Lo-Pro Roof Rack by Westcott Designs
Westcott Designs full length lo-pro roof rack for the (2010-2024) 5th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately. *TRD PRO models require new factory OEM bolts to attach the rack to the roof of the vehicle (Part #63230-42010) available separately below. -
2024-2026 Toyota Land Cruiser Full Length Modular Roof Rack by Westcott Designs
Westcott Designs full length modular roof rack for the all-new 2024-2026 Toyota Land Cruiser . This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile Visor
- Signature bottle openers
-
--- Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
-
Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
-
Westcott Designs Front Fender Liner Pullback Kit for 2021-2026 GMC Yukon & Yukon XL and Chevy Tahoe & Suburban SUV's. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 35" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
Westcott Designs Front Tire Clearance Kit for the 2023-2026 Sequoia. Enables you to run up to a 37" tire with full turning radius and clearance. Includes CNC laser cut weld in frame plates, inner Fenderwell pull back brackets and associated hardware to complete the job. Made in the U.S.A. and comes with a Lifetime Warranty.
- Run up to a 37" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-2023 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire without a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not affect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:- 2020-'23 Tacoma: 1.5” (front lift)
-
Westcott Designs Bilstein TRD PRO preload collar lift kit for model years 2015-2018, 4Runner, Tacoma, or Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
-
Westcott Designs full length modular roof rack for the 2024-2026 Lexus GX550. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile Visor
- 10-Light Cut-Out Visor
- 42.5" Light Bar Cut-Out
- 43.375" Light Bar Cut-Out
- Signature bottle openers
-
Westcott Designs 2005-2023 Tacoma TRD Off-Road preload collar lift kit. This kit is designed for the 2005-2023 Tacoma TRD Off-Road with the yellow body Bilstein TRD shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2005-2023 Tacoma TRD Off-Road: 3” (front lift) and 1.00” (rear lift)
-
2025-2026 Toyota 4Runner (6th Gen) Full Length Lo-Pro Roof Rack by Westcott Designs
Westcott Designs full length lo-pro roof rack for the 2025-2026 Toyota 4Runner 6th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include aluminum extruded cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately. -
Westcott Designs Front Leveling preload collar lift kit for the all-new 2023-2026 Toyota Sequoia TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. Our Westcott kit gives you additional 2” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This lift kit is designed to level the stance of your ride front to rear and allows you run up to a 35" tire with minor trimming. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! https://www.youtube.com/watch?v=r3qOlRBxZDg -
Full Length Modular Roof Rack
Westcott Designs full length modular roof rack for the Lexus GX 460. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Signature bottle openers
-
Westcott Designs rock sliders for 2nd & 3rd gen Toyota Tacoma Short Bed & Access Cab (4WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit double cab long bed, see separate listing) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2008-2021 Westcott Designs preload collar lift kit for the 200 series Toyota Land Cruiser. The kit features CNC machined lower preload collars, top spacer plates, and rear billet lift pucks that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: • 2008-2021 LC200: 3.0” (front lift) and 1.25” (rear lift) -
Westcott Designs FRONT ONLY preload collar lift kit for the all-new 2022-2026 Toyota Tundra TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tundra PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 2.5” front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with purchase This kit provides the following lifts:- 2022-2025 Tundra Fox PRO suspension equipped trucks: 2.5” (front lift)
-
This is for a Factory Fox TRD PRO, exclusively for the 2020-2022 Toyota Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop. This kit provides the following lifts:
- 2020-2022 Toyota Sequoia: 1.5” (front lift) and 1” (rear lift)
-
Westcott Designs NO KICK OUT rock sliders for 2010-2024 5th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. These No Kick Out sliders have a sleeker design that follow the body line of the vehicle more and give it a nice smooth look. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Full Length Modular Roof Rack Westcott Designs full length modular roof rack for the all-new 2023-2026 Toyota Sequoia. Designed to accommodate models with the *panoramic sunroof and for users that desire the optional floor inserts to increase your cargo space. The modular rack measures 4.5” tall to allow for full function of the standard and panoramic sunroof. Features aluminum construction for light weight (49.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 4.5” T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Optional floor inserts available
- Signature bottle openers
- Made in the U.S.A.
- All aluminum construction
- Choice of visor
- Lo-Pro model also available, see separate listing
-
Westcott Designs Light Bar Brackets, designed to allow you to mount your favorite light bar to not only our roof rack but any roof rack that uses standard Series 10 extruded honed cross bars. Available in different lengths to fit many different light bars and come with hardware as needed. All brackets are made out of mild steel, laser bent on our fully automated press brake and powder coated black for a strong, durable and long lasting finish. Sold in pairs.- Short 1-3/8th" (Used for single row light bars like Rigid SR series, Baja Designs S8 series and similar)
- Long 1-7/8th" (Used for dual row light bars like Rigid E series, Baja Designs OnX6 series and similar)
- Compatible with all Series 10 extrude honed cross bars
- Made in the U.S.A
- Lifetime Warranty
-
2025-2026 Toyota 4Runner (6th Gen) Ditch Light Brackets by Westcott Designs
Westcott Designs™ A-pillar ditch light brackets for the 6th Gen Toyota 4Runner! CAD designed, laser cut, bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs. *Lights not included. -
2024-2026 Toyota Tacoma 4WD Short Bed Rock Sliders by Westcott Designs
The Best Quality For Your New Truck!
Protect your 2024-2026 Tacoma Short Bed and elevate your off-road game with Westcott Designs premium rock sliders. Westcott Designs rock sliders for the 4th Gen Toyota Tacoma Short Bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Check-out the Westcott Designs rock sliders for the all-new 2024-2026 Toyota Land Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
We are a full fab shop and a full production shop. Please give use a call on your small or large projects. You won't be disappointed you did. -
This high-quality men's Westcott Designs t-shirt puts a refined twist on a well-loved style. This men's logo T-Shirt is made with super soft luxurious fabric, with the Westcott Designs Logo on the front and the US flag on the sleeve. -
Westcott Designs Front Bumper Relocation Brackets for 2007 & Up Toyota Tundra. Enables you to run a 35” tall tire without trimming the bumper flange or inner fender liner. Laser cut out of .250” mild steel for a precise fit and powder coated black for durability that will last for years to come. Comes as a pack of four, (2) units required for each side to shim your bumper out a total of .500”. Duplicated to the factory OEM design to transfer the energy into the crumple zones in case of a frontal collision. Made in the U.S.A. and come with a Lifetime Warranty.- Compatible with both factory and most bolt-on accessory type bumpers
- Easy installation using existing OEM hardware
- Made in the U.S.A
- Lifetime Warranty
-
2024-2026 Toyota Tacoma Roof Rack by Westcott Designs™
Westcott Designs roof rack for the 2024-2026 Tacoma (4th Gen). Features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels. Westcott Designs roof rack for the all new 2024 Tacoma! New features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels.- No cut out visor
- Single row 40-inch light bar cut out
- Rigid Adapt light bar cut out
- (10) light 4” cut out
- Signature bottle openers with or without the truck logo
-
Westcott Designs Front Fender Liner Pullback Kit for 2021-2026 Chevy Tahoe & Suburban, GMC Yukon & Yukon XL SUV's. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.
- Run up to a 35" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
Westcott Designs Key Chain- Brushed Stainless
-
Westcott Designs Awning Brackets for Westcott Designs Roof Racks - Will also fit ARB, CVT, Ironman, Darche and other roof racks as well. IMPORTANT INFORMATION BELOW: 4th Gen Tacoma Westcott Designs Roof Racks have slightly thicker side rails. Please select the 4th Gen Tacoma in the drop down above to ensure you get the correct bracket. Please Choose from the Following Bracket Options:- 90 Degree Awning Brackets
- 180–270 Degree Awning Brackets
- 4th Gen Tacoma Westcott Designs Roof Rack 90 Degree Awning Brackets
- 4th Gen Tacoma Westcott Designs Roof Rack 180/270 Degree Awning Brackets
-
The FJ Cruiser spare tire relocation mount kit. It’s designed to allow the FJ to run up to a 35” spare tire and no have and clearance issues. It is built with high quality made parts all built in house. We take pride in making sure our products are to the highest quality. IMPORTANT: Minimum 106.1 MM Center Bore. **OPEN ENDED LUNG NUTS MAY BE REQUIRED** -
This is for a Bilstein TRD PRO (FRONT ONLY) (2015 - 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. This kit provides the following lifts:
- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
-
IN STOCK & READY TO SHIP!! - - Westcott Designs rear hatch ladder for the 2025-2026 Toyota 4Runner (6th Gen). Construction is all aluminum to keep it light weight. The uprights are double layered 3/16 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market!Westcott Designs Ladder Features
- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Westcott Designs Toyota TRD PRO Grill Upper Light Bar Bracket Kit. This bracket kit allows you to mount a 20" light bar of your choice with your TRD PRO grill conversion in your new 2022-2026 Tundra or 2023-2026 Sequoia. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and comes with complete hardware for an easy installation. We have test fit and verified fitment of Rigid Industries SR series, Baja Designs S8 and Heretic brand light bars, may fit other brands as well but not verified at this time. Be sure to check out our front camera relocation bracket as well that will complete your grill conversion as needed. *Light bar not included -
2024-2026 Toyota Tacoma Bed Stiffeners by Westcott Designs™
Westcott Designs Bed Stiffeners for the all new 2024-2026 Tacoma! Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware including the stainless steel badging to add a little "bling" to your bed! -
Westcott Designs 2016-2023 Tacoma TRD Sport preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2016-2023 Tacoma TRD Sport: 3” (front lift) and 1" (rear lift)
-
- Westcott Designs 4Runner TRD PRO FOX (FRONT ONLY) lift kit for the 2021-2024 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load.
- 2021-2024 4runner: 1.6-1.7” (front lift)
-
--- Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:- 4Runner: 3” (front lift) and 1.25” (rear lift)
- Tacoma: 3” (front lift) and 1” (rear lift)
- Tundra: 3” (front lift) and 1” (rear lift)
-
*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs NEW TRD PRO 4Runner 2” (FRONT ONLY) lift kit for the 2021-'24 model years. This kit is designed to give you an additional 2” front only lift rather than our standard 1.5” lift. The intention of this kit is to enable you to either run a larger tire (Up to a 285/75R17) or to help correct the ride height of your TRD PRO if you add additional front-end weight with a bumper and/or winch. *If you are looking to use this kit to lift your 4Runner to run the larger tire options, you will need to run a 2” rear spring so the vehicle will sit correctly front to rear. We use and have had a lot of luck with either Icon (#52700) or OME (#2895) springs. All Westcott Designs products are proudly manufactured in-house to the highest specifications. All our preload collar lift kits are CNC machined out of billet aluminum and are hard anodized black or are available in raw aluminum finish as well. This kit provides the following lifts:
- 2021-'24 4Runner: 2” (front lift only)
-
2023-2026 Toyota Sequoia Rear Hatch Ladder by Westcott Designs Westcott Designs rear hatch ladder for the all new 2023-2026 Toyota Sequoia! Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! SEQUOIA LADDER MOUNT TEMPLATE How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- Due to high volume of orders, new orders ship within 3-4 weeks of date of order placed.
-
2024-2026 Toyota Land Cruiser Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the 2024-2026 Toyota Land Cruiser. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached at both the All-New 2024-2026 Toyota Land Cruiser Full-Modular Roof Rack and two 4.5” Industrial Vacuum Pump Suction Mounts included. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set! -
Westcott Designs Modular Carrier Rack. Universal fit works in any 2” or 2.5" standard receiver. Features a dual side design to allow the user the ability to add on or remove equipment as needed on the go. Tire arm is available with either dual, left, right or center mount offset. Carrier arm is built out of 3"x2" box .120" wall tubing and the tire arm is built out of 1.75" diameter .120" wall DOM tubing. Tire carrier features a wheel mounted attachment system with multiple different lug patterns available to accommodate most popular patterns. Multiple options for arms that include additional left spare tire rack, optional cooler rack with worktable, grill mount and more!* Pass through receiver tow hitch, rated to tow up to 10,000lbs. and feature secure CNC cut dove tail attachment points for arm(s). All carrier racks feature our Westcott anti wobble wedge (US patent #10,661,722) receiver hitch that ensures your equipment stays put no matter what kind of abuse you put it through. *Coming soon Please confirm your lug pattern before placing your order by using this quick tool here - https://tiresize.com/bolt-pattern-finder/ If you don't see your lug pattern listed in the drop down selection please select the "custom" option and be sure to put a good phone number for your order so we can contact you for lug pattern specs needed.- Modular Design
- Accessory mount plate
- Fits up to a 37” tall tire
- Black powder coat finish
- Made in the U.S.A.
- Lifetime Warranty
-
All-New 6th Gen 2025-2026 Toyota 4Runner Molle Panels by Westcott Designs™ - Attaches to the 4Runner Modular Roof Rack Or 4Runner Lo-Profile Roof Rack Check out the Westcott Designs™ molle panels for the ALL-NEW 6th Gen 2025 Toyota 4Runner. You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland and Off-Road Set-up. Laser cut and powder coated for a strong durable finish attached to the 4Runner Lo-Profile Roof Rack or Modular Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your 4Runner. Available in Driver-Side, Passenger-Side or get the Set! *Disclaimer: MUST HAVE either the Lo-Profile Roof Rack OR Modular Roof Rack for the 4Runner by Westcott Designs™ to attach the molle panels to the 6th Gen 4Runner. -
NEW
2024-2026 Toyota Land Cruiser 3/4 Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the 2024-2026 Toyota Land Cruiser. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached to the 2024-2026 Toyota Land Cruiser 3/4 Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set! -
Check-Out the Westcott Designs Rock Sliders for the 2024-2026 Lexus GX 550. **IMPORTANT: Toyota has 2 different frames that come with ¹PRE-TAPPED HOLES and some that are NOT pre-tapped. Please check your frame and choose which Hardware Pack is going to work for your install:- Hardware Kit 1: Frame has pre-tapped holes (meaning they have threads or grooves cut into it allowing for a bolt or screw).
- Hardware Kit 2: Frame DOES NOT have pre-tapped holes. There may be holes but there are no threads/grooves to allow for a bolt to screw into the frame. In this case, you'll need Hardware Kit 2 which includes Blind Bolts. (if you have questions, please reach out to our team at 1-888-574-5270)
-
Full Length Roof Rack
Westcott Designs 2nd & 3rd Gen Tacoma roof rack. Features extruded aluminum cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”.All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Signature bottle openers
-
Westcott Designs rock sliders for 2007-'21 Toyota Tundra CrewMax, standard bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 15 degree), with or without top plates and a durable BK08 black powder coat finish. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs 4Runner Limited with XREAS preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2010-'24 4runner Limited : 3” (front lift) and 1.25” (rear lift)
-
Full Length Modular Roof Rack
Westcott Designs FJ Cruiser modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations by following the contour of the roof line. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
-
Westcott Designs rock sliders (With Kickout) for the 2022-2026 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2019-2020 Toyota 4Runner (5th Gen) Fox TRD PRO Lift Kit by Westcott Designs --- Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:
- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
-
2022-2026 Toyota Tundra No Kickout Rock Sliders Westcott Designs no kickout rock sliders for the 2022-2026 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Check out the ALL-NEW 6th Gen 2025+ Toyota 4Runner FRONT ONLY Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
2024-2026 Toyota Tacoma Ditch Light Brackets by Westcott Designs™
Westcott Designs™ A-pillar ditch light brackets for the 2024-2026 Toyota Tacoma (4th Gen)! CAD designed, laser cut, bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
Westcott Designs 2010-2024 4Runner SR5, TRD Off-Road, Trail, Venture & Premium Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-2024 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift)
-
Check out the 2024-2026 TOYOTA LAND CRUISER REAR HATCH LADDER by Westcott Designs Westcott Designs rear hatch ladder for the 2024-2026 Toyota Land Cruiser. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:
- 4Runner: 3” (FRONT ONLY)
- Tacoma: 3” (FRONT ONLY)
- Tundra: 3” (FRONT ONLY)
-
Westcott Designs Tacoma SR5/SR preload collar lift kit. This kit is designed for the 2005-2023 Tacoma SR5/SR with the black body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2005-2023 Tacoma SR5/SR: 3” (front lift) and 1" (rear lift)
-
Westcott Designs™ light bar brackets for the 2022-2026 3rd Gen Toyota Tundra & Sequoia. These brackets install behind your front grill and allow you to mount a 20" light bar of your choice. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and uses OEM hardware for a strong and solid mounting platform. We have test fit them with both the Rigid Industries SR series and Baja Designs S8 series light bars, should also accept other popular brands as well. *Light bar not included -
Westcott Designs AVS Link Arms give your 2025–2026 Lexus LX700 & LX600 the perfect boost by recalibrating the factory AHC suspension for additional lift across all ride modes—without sacrificing ride quality, comfort, or the premium Lexus driving experience. This is the cleanest, simplest way to achieve a more aggressive stance, level out the vehicle, and clear larger tires while maintaining full AHC functionality. -
SINGLE REAR ONLY Lift Puck - 1" or 1-5/8" - 2023-2026 Toyota Sequoia Westcott Designs REAR ONLY lift puck for the 2022-2026 Tundra & 2023-2026 Sequoia. Your choice of 1" or 1-5/8" of rear lift only on standard rear coil suspension equipped Tundra's & Sequoia's. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. Price for individual units, for a pair you need to order quantity of (2). *Do NOT attempt to stack pucks for more lift, you will damage other rear suspension components and it is extremely unsafe*
-
Full Length Modular Roof Rack
Westcott Designs full length modular roof rack for the Lexus GX 470. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. We carefully design our racks to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile
- Aluminum Construction
- Signature bottle openers
-
Westcott Designs™ Bed Stiffeners for 2016-2023 Toyota Tacoma (3rd Gen). Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware for easy and clean installation. -
Westcott Designs rock sliders for 2nd & 3rd gen Toyota Tacoma Long Bed 4WD. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit short bed, see separate listing) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs FRONT ONLY preload collar lift kit for the all-new 2023-2026 Toyota Sequoia! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 3” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! -
Westcott Designs 200 Series Land Cruiser basket style modular roof rack insert. The low-profile design mounts to your existing roof rack rails and enables you to expand your cargo space for wherever your next adventure takes you. It features extrude honed cross bars, aluminum construction for light weight and steel mounting inserts for strength and to maximize load capacity. We offer the rack in standard black powder coat finish with a plain visor or in our special Heritage Edition which features bronze powder coat finish and our signature Heritage Edition engraved visor. Optional floor panel inserts sold separately. • Optional Heritage Edition Custom Color & Visor ($100 Additional) • Optional floor inserts Standard Black ($455 Additional) • Black or Bronze powder coat finish available -
2008-2021 Westcott Designs Front Only preload collar lift kit for the 200 series Toyota Land Cruiser (2008-'21). The kit features CNC machined lower preload collars with top spacer plates that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: • 2008-2021 LC200: 3.0” (front lift)
-
2025-2026 Toyota 4Runner (6th Gen) Full-Length Modular Roof Rack by Westcott Designs
Check-out Westcott Designs full length modular roof rack for the 2025-2026 Toyota 4Runner (6th Gen). Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately. -
Westcott Designs AVS rear link arms for the 2022-2026 Tundra and 2023-2026 Sequoia. Gives you 7/8" of rear lift only on a rear air suspension equipped Tundra & Sequoia. Laser cut stainless steel, made in the U.S.A and come with a lifetime warranty. -
Westcott Designs NO KICK OUT rock sliders for 2nd & 3rd gen Toyota Tacoma Short Bed & Access Cab (4WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit double cab long bed, see separate listing) *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs Rooftop Tent Brackets
Upgrade your overland setup with the Westcott Designs Rooftop Tent Brackets, designed specifically to integrate seamlessly with Westcott Designs bed racks and roof racks. These durable, precision-engineered brackets provide a secure and versatile mounting solution for your rooftop tent, ensuring a snug fit and stable support for your outdoor adventures. Constructed from high-quality materials, these brackets are built to withstand the toughest conditions. The design helps to lift the tent slightly off the Roof or Bed Rack to give you greater clearance. The design accommodates most rooftop tents, offering flexibility for different setups while maintaining the sleek, reliable performance that Westcott Designs is known for. -
Westcott Designs 2016-2023 Tacoma TRD Off-Road Front Only preload collar lift kit. This kit is designed for the 2016-2023 Tacoma TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. This kit is designed to be used in conjunction with your choice of rear leaf pack, Add-A-Leaf or other lift methods to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2016-23' Tacoma TRD Off-Road: 3” (front lift)
-
Check out the Westcott Designs molle panels for the 2010-2024 (5th Gen) Toyota 4Runner. You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland Set-up. -
2023-2026 Toyota Sequoia Full Length Lo-Pro Roof Rack
Westcott Designs™ full length lo-pro roof rack for the all new 2023-2026 Toyota Sequoia. This lo-profile roof rack has a sleek design that hugs your existing roof line and minimizes additional vehicle height. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 2.5"T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Not compatible with Panoramic sunroof equipped vehicles -
Check Out the 2024-2026 Toyota Land Cruiser Ditch Light Brackets by Westcott Designs
Check-out Westcott Designs’ A-pillar ditch light brackets for the All-New 2024-2026 Toyota Land Cruiser! CAD designed, laser cut & bent, and powder coated black for a durable finish. Easy install and uses OEM mounting hardware. This unique design placed the light right next to your side-view mirrors, making it seamlessly integrate into the design of your Land Cruiser and allow the light to be where you need it without obstructing your view in any way. *Lights not included, sold separately. Designed for the Rigid Industries 4" 360 Series Light. **IMPORTANT: Download the attached Install Template PDF below. This will give you the exact drill locations to install your Westcott Designs 2024 Toyota Land Cruiser Ditch Light Brackets. -
Westcott Designs™ Tundra SR5 preload collar lift kit is designed for the 2007-2021 Toyota Tundra sR5 with the standard black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-2021 Tundra SR5: 3” (front lift) and 1" (rear lift)
-
2022-2026 Toyota Tundra Factory Air Bag Suspension Delete Kit - - Now you can upgrade your Toyota factory Air Ride suspension for the 2022-2026 Tundra or 2023-2026 Sequoia with Westcott Design’s Air Bag Delete kit! -
Westcott Designs™ Rock Sliders for the 2010-2024 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
2025-2026 Toyota 4Runner (6th Gen) 3/4 Roof Rack by Westcott Designs
Check-out Westcott Designs 3/4 roof rack for the ALL-NEW 2025-2026 Toyota 4Runner (6th Gen). Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- No cut out visor
- Signature bottle openers
- Add-on option with floor panels
-
Westcott Designs License Plate Mount for Westcott Designs Hitch Mount Racks with the following part numbers: 10001BK 10002BK-R 10002BK-T 10003BK-R 10003BK-T 10004BK **Does NOT fit the Single Tire Carrier rack, only fits the original dual arm hitch mount racks** Product Dimensions (in): 12 x 9.5 -
Check-Out the ALL New 2024-2026 GMC 2500 AT4X Bumper Light Bar (AEV Edition) from Westcott Designs™! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The GMC 2500 AT4x (AEV Edition) Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
Westcott Designs 2007-2021 Tundra TRD Off-Road preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After installing your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-2021 Tundra TRD Off-Road: 3” (front lift) and 1" (rear lift)
-
2024-2026 Toyota Tacoma (4th Gen) Rear Lift Pucks
Check-out the Westcott Designs rear lift pucks for the new 2024-2026 Tacoma that give you 3/4" of rear only lift. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. Price per pair. *Do NOT attempt to stack pucks for more lift, you will damage other rear suspension components and it is extremely unsafe* -
Westcott Designs rear lift pucks for 4th & 5th Generation Toyota 4Runner. Gives you 1.25" of rear lift only on standard rear coil suspension equipped 4Runner. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. -
Full Length Lo-Pro Roof Rack
Westcott Designs™ full length lo-pro roof rack for the popular 2003-2009 4th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately. -
Check out the ALL-NEW 6th Gen 2025-2026 Toyota 4Runner Preload REAR-ONLY Lift Pucks from Westcott Designs! *SOLD IN PAIRS This puck features all new CNC machined components and is available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This puck gives you .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. These are NOT your traditional spacer lift pucks, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset. -
2024+ Toyota Land Cruiser 3/4 Roof Rack by Westcott Designs
Check-out Westcott Designs 3/4 roof rack for the 2024+ Toyota Land Cruiser (LC250). Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- No cut out visor
- Signature bottle openers
- Add-on option with floor panels
-
2024-2026 Lexus GX 550 Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the All-New 2024-2026 Lexus GX 550. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached at both the All-New 2024 Lexus GX 550 Full-Modular Roof Rack and two 4.5” Industrial Vacuum Pump Suction Mounts included. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set! -
Westcott Designs rock sliders for FJ Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs "Built By" License Plate Frame. Show your support, show off your ride and help support our charity! 100% of all proceeds go to charity*! Plus you are automatically entered to win our monthly raffle drawing if your ride is spotted and shared on social media no matter where you are located! See our YouTube video here for more information and details! FREE Shipping! *Charity of our choice, may change without notice -
NEW
Checkout the 2024-2026 Lexus GX 550 3/4 Molle Panels by Westcott Designs™ - Attaches to the 2024-2026 Lexus GX 550 3/4 Roof Rack Check out the Westcott Designs™ molle panels for the 2024-2026 Lexus GX 550. You can choose Driver-Side, Passenger-Side or the full Pair to add to your GX 550 Overland set-up. Laser cut and powder coated for a strong durable finish attached to the All-New 2024-2025 Lexus GX 550 3/4 Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your All-New Lexus GX 550. -
Westcott Designs Jerry Can Mount. Offered in either aluminum or steel construction and your choice of raw finish or powder coated black. These mounts are designed to be used with Wavian brand 20L Jerry Cans; see link below for more information. Laser cut and bent in house, strongest mount on the market and the best part is they are designed and built in the USA! Wavian website: https://wavianusa.com -
Westcott Designs rock sliders for the all new 2024-2026 Toyota Tacoma Long Bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs™ fog light brackets for the new 2022-2026 Toyota Tundra (3rd Gen). Designed to accept (2) Baja Designs S2 light assemblies per side*, CAD designed, laser cut & bent and powder coated black for a durable finish. Drastically improve the performance of your current fog light set up while maintaining your OEM light location and fit. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. *Lights not included. -
2023-2026 Toyota Sequoia Ditch Light Brackets by Westcott Designs
Check-out Westcott Designs’ A-pillar ditch light brackets for the 2023-2026 Toyota Sequoia! They also work for the 2022-2026 Toyota Tundra! CAD designed, laser cut & bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
Westcott Designs FRONT ONLY preload collar lift kit for the 2023-2026 Toyota Sequoia TRD Off-Road! This kit features CNC machined lower preload collars. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. Our Westcott kit gives you additional 2” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This lift kit is designed to level the stance of your ride front to rear and allows you run up to a 295/70R18 (34" tall) tire with minor trimming. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with any preload collar lift kits This kit provides the following lifts:- 2023+ Sequoia TRD Off-Road: 2” (front lift)
-
2022-2026 Toyota Tundra Ditch Light Brackets by Westcott Designs™
Check-out Westcott Designs’ A-pillar ditch light brackets for the 2022-2026 Toyota Tundra! They also work for the 2023-2026 Toyota Sequoia! CAD designed, laser cut & bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
Westcott Designs rock sliders for the 200 series Toyota Land Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. In addition, the frame plates are also laser cut out of .188 *HRPO steel. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. Offered with or without top plates and an optional durable BK08 black powder coat finish. *Please note, these sliders are a weld on application only due the frame design of the 200 series Land Cruiser *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Y-shaped, ratcheting tie-down strap lets you secure an oversize spare tire. Steel hooks with clasps prevent accidental detachment from anchor points. 6,000 lbs Max load. -
Check out the 2024-2026 Lexus GX 550 REAR HATCH LADDER by Westcott Designs Westcott Designs rear hatch ladder for the All-New 2024-2026 Lexus GX 550. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Check-Out the ALL New 2024+ GMC 2500 & 3500 AT4X Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The GMC 2500 AT4X Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
Westcott Designs roof rack floor inserts for 5th gen 4Runner modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. *Not compatible with the lo-pro model -
Westcott Designs Switch Pros Keypad Bracket for 2024-2026 Toyota Land Cruiser (LC 250)
The Westcott Designs Switch Pros Keypad Bracket is the perfect interior mounting solution for your new 2024-2026 Toyota Land Cruiser (LC 250). The bracket provides a secure and convenient way to access your Switch Pros keypad. Designed specifically for a clean and seamless installation, this bracket ensures quick access to the buttons and controls for all your accessories wired to the Switch Pros module. Milled from Billet Aluminum with precision craftsmanship and finished with Type 3 hard coat anodizing. This bracket is designed to fit perfectly within the Toyota Land Cruiser interior, offering a professional, factory-like appearance. Whether controlling lights, winches or other auxiliary systems, the ergonomic positioning of the keypad allows for easy, distraction-free operation while driving. Upgrade your truck with the Westcott Designs Switch Pros Keypad Bracket for reliable functionality, enhanced convenience, and a polished look. -
Upgrade your OE tow hooks to Billet Aluminum Tow Hooks for your new 2025-2026 Toyota 4Runner (6th Gen). Machined from a block of Billet Aluminum to provide you with stronger and more durable tow hooks that not only look amazing, but provide a stronger set-up when you or your friends get stuck. Not only that, but you can get them in Raw, Black or Red powder coat colors to match the look you're going for. -
Introducing the Westcott Designs MAXTRAX™ Universal Roof Rack Mount. Meticulously designed, engineered, and built to provide a secure and accessible solution for your MAXTRAX™ recovery tracks. Crafted with precision, this mount ensures that your recovery gear is always within reach, allowing for quick deployment during off-road adventures. Key Features:- Universal Compatibility: Engineered to fit a wide range of roof racks, this mount offers versatile installation options for various vehicle setups.
- Robust Construction: Built from high-quality materials, the mount provides durability and stability, ensuring your MAXTRAX™ are securely held even in rugged conditions.
- Easy Installation: Designed for straightforward installation, the mount allows for quick attachment and removal of your MAXTRAX™ recovery tracks.
-
Westcott Designs C4 Bumper Universal Light Bar Brackets, designed to allow you to mount your favorite light bar properly inside your C4 front bumper. We found that the standard brackets supplied with most lightbars don't allow you to mount the light flush inside the bumper. Our Westcott Designs brackets allow you infinite adjustability to suite your likeness and include different shims to accommodate all of the popular light bar brands out on the market today. Brackets are made out of stainless steel, and laser bent on our fully automated press brake. Sold in pairs. Check It Out -
Westcott Designs rock sliders for the 2003-2009 4th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Ditch Light Brackets
Westcott Designs Tacoma A-pillar ditch light mount kits are specifically designed to securely mount lights to OEM A-pillar/ditch locations. Fits 2016-'23 Tacoma CAD designed, laser cut and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. Low profile designed mount incorporates our carriage bolt light mount which not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
Westcott Designs rock sliders for the all new 2023-2026 Toyota Sequoia. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *Flat-rate shipping applies to most locations. Additional freight charges may apply to certain areas. Customer will be contacted for approval prior to shipment if applicable. -
Westcott Designs Bed Rack for the 4th Generation Toyota Tacoma. Compatible with both short and long beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. You'll also have your choice of the new Cab Height, where you can purchase the Roof Rack Extension to create a seamless roof rack from the Tacoma Roof Rack to the Bed Rack. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in short bed and long bed configurations. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately*- Molle Panels (Short Bed or Long Bed)
- Roof Rack Extension - which pairs with the 4th Gen Tacoma Roof Rack for a seamless rack from the roof to the end of the bed. Maximizing your space for long GFC tents and other accessories.
-
The 2025-2026 Toyota 4Runner (6th Gen) Fog Lights just got a MAJOR OE+ UPGRADE from Westcott Designs! Yep, that's right! Westcott Designs threw out the OE standard and +'d up the fog lights with Baja Designs SR8's, perfectly wrapped and secured with a Westcott Designs fog light bracket. Making it easy for customers to swap out their fog lights and truly take it from stock to OE+. Not just some fugly bracket and light jammed in there, but a seamless looking design that makes it look like it's been there all along. It's what we call - OE+. We appreciate what Toyota does with their vehicles. The design, the engineering, the care…and we just want to give you, the customer, the ability to make your vehicle go from stock to AWE! That's right, giving you an aftermarket part that's more than just something to bolt on, but something that truly looks like it was built this way from the beginning. That it looks seamless and part of the original design while providing a bold statement at the same time. If you're looking to upgrade your fog lights…take them from OE to OE+, then place your ORDER TODAY! -
Full Length Modular Roof Rack by Westcott Designs™ - 20021-2026 Chevy Tahoe & GMC Yukon Westcott Designs full length modular roof rack for the 2021-2026 Chevrolet Tahoe & GMC Yukon. Designed to accommodate models with the *panoramic sunroof and for users that desire the optional floor inserts to increase your cargo space. The modular rack measures 4.5” tall to allow for full function of the standard and panoramic sunroof. Features aluminum construction for light weight (52lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 103"L x 52"W x 4.5” T, includes (11) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise at both city and freeway speeds. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite when out on the trails.- Optional floor inserts available
- Signature bottle openers
- Made in the U.S.A.
- All aluminum construction
-
Westcott Designs Switch Pros Keypad Bracket for 2020-2026 GMC 2500 & 3500
The Westcott Designs Switch Pros Keypad Bracket is the perfect interior mounting solution for your GMC 2500 0r 3500, providing a secure and convenient way to access your Switch Pros keypad. Designed specifically for a clean and seamless installation, this bracket ensures quick access to the buttons and controls for all your accessories wired to the Switch Pros module. Milled from Billet Aluminum with precision craftsmanship, this bracket is designed to fit perfectly within the GMC 2500's/3500's interior, offering a professional, factory-like appearance. Whether controlling lights, winches or other auxiliary systems, the ergonomic positioning of the keypad allows for easy, distraction-free operation while driving. Upgrade your truck with the Westcott Designs Switch Pros Keypad Bracket for reliable functionality, enhanced convenience, and a polished look. -
Westcott Designs Tundra TRD Sport preload collar lift kit. This kit is designed for the 2007-2021 Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-2021 Tundra TRD Sport: 3” (front lift) and 1" (rear lift)
-
Westcott Designs full length roof rack for 2007-21’ Toyota Tundra CrewMax. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Includes (8) extrude honed cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails and complete hardware. *Lights sold separately. Please Note: This is a “Drill To Mount” roof rack and we suggest that you have professionally installed. We will not be held responsible for any damage to your vehicle.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Signature bottle openers
-
2024-2026 Toyota Tacoma (4th Gen) Westcott Designs 1/2 inch FRONT Top Spacer
Dial in the perfect stance for your 4th Gen Toyota Tacoma with the Westcott Designs 1/2” Top Spacer. Designed to provide an additional 1/2 inch of front-end lift, this precision-machined aluminum spacer helps reduce factory rake for a more leveled and aggressive look. Ideal for those looking to fine-tune their suspension setup without compromising ride quality, each spacer is CNC-machined from high-grade aluminum and offered in your choice of a sleek black anodized finish or classic raw aluminum. Whether you’re compensating for added front-end weight or just want a more balanced stance, the Westcott 1/2” Spacer is the clean, simple solution. Be sure to check-out our YouTube Channel to learn more about Westcott Designs products and all the new products we'll be releasing for the 6th Gen 2025-2026 Toyota 4Runner! Westcott Designs YouTube Channel -
Westcott Designs A-pillar ditch light brackets for 2010-'24 Toyota 4Runner 5th Gen. CAD designed, laser cut, and powder coated black for a durable finish. These are hands down the best built and strongest mounts out on the market. Some might even say overbuilt but we never would! Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. Low profile design mount incorporates our carriage bolt light mount which not only makes for a cleaner installed look but also reduces wind noise. Choose from a wide variety of light options to suit your specific needs*. *Lights not included. -
2024+ Lexus GX550 3/4 Roof Rack by Westcott Designs
Check-out Westcott Designs 3/4 roof rack for the 2024+ Lexus GX550. Offered with or without floor inserts, all racks include extruded aluminum cross bars. We carefully designed our rack to minimize wind noise. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- No cut out visor
- Signature bottle openers
- Add-on option with floor panels