×
-
Out of stock
This Hitch Mount Rack comes equipped with a driver side cooler tray and work table arm and our standard passenger side tire rack. Included is a Hi-Lift jack mount (Designed with the Hi-Lift X-Treme 48" Jack), light tabs, 2" Y tire strap, auxiliary hitch receiver, and two stainless steel CNC bottle openers. The rack fits any standard 2” receiver and provides an auxiliary hitch receiver into the rack for towing. Both arms swing away from the vehicle allowing full function of the tailgate on both pickup trucks and SUV’s. Made in USA. *NO cooler included *6-8 week production lead time on all new orders* -
Full Length Modular Roof Rack Westcott Designs full length modular roof rack for the 2021-'23 Chevrolet Tahoe & GMC Yukon. Designed to accommodate models with the *panoramic sunroof and for users that desire the optional floor inserts to increase your cargo space. The modular rack measures 4.5” tall to allow for full function of the standard and panoramic sunroof. Features aluminum construction for light weight (52lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 103"L x 52"W x 4.5” T, includes (11) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise at both city and freeway speeds. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite when out on the trails.- Optional floor inserts available
- Signature bottle openers
- Made in the U.S.A.
- All aluminum construction
- Currently 4–6-week production lead time
-
Out of stock
This Hitch Mount Rack comes equipped with a driver side tire mount arm and a passenger side grill mount arm. It has a Hi-Lift jack mount (Designed with the Hi-Lift X-Treme 48" Jack) with light tabs included (jack and lights are not included), auxiliary hitch receiver, and two stainless steel CNC bottle openers. *6-8 week production lead time on all new orders* Hitch Mount Rack with Cooler/Work Table & Grill Mount: Driver Side- Added Cooler Mount + Stainless Steel Work Table to the Tire Rack
- Base size of up to 32.125" length by 18.125" width. This also include the work top table
- Replaced Tire Rack with a Mount for a TREAGER® Grill (Ranger or Tailgater)
- Grill not included in price.
-
Out of stock
This Hitch Mount Rack comes equipped with standard driver and passenger side tire racks. The tire racks are designed to hold up to (2) 37" tall tires. Included is a Hi-Lift jack mount (Designed with the Hi-Lift X-Treme 48" Jack), light tabs, (2) 2" Y tire straps, auxiliary hitch receiver, and two stainless steel CNC bottle openers. The rack fits any standard 2” receiver and provides an auxiliary hitch receiver into the rack for towing. Both arms swing away from the vehicle allowing full function of the tailgate on both pickup trucks and SUV’s. Made in USA. *6-8 week production lead time on all new orders* -
Out of stock
This Hitch Mount Rack comes equipped with a standard driver side tire rack and a passenger side grill mount arm. Included is a Hi-Lift jack mount (Designed with the Hi-Lift X-Treme 48" Jack), light tabs, 2" Y tire strap, auxiliary hitch receiver, and two stainless steel CNC bottle openers. The rack fits any standard 2” receiver and provides an auxiliary hitch receiver into the rack for towing. Both arms swing away from the vehicle allowing full function of the tailgate on both pickup trucks and SUV’s. Made in USA.- Replaced Tire Rack with a Mount for a TREAGER® Grill (Ranger or Tailgater)
- Grill not included
-
Westcott Designs rock sliders (With Kickout) for the 2022-'24 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** Options:- Raw DOM, MIG Welded - $1470 a set.
- Raw DOM, TIG Welded - $1670 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK59) for an additional $275.00 per set.
- Currently experiencing around an 7-8 week lead time on all new slider orders.
-
Westcott Designs no kickout rock sliders for the all-new 2022-'24 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** Options:- Raw DOM, MIG Welded - $1470 a set.
- Raw DOM, TIG Welded - $1670 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK59) for an additional $275.00 per set.
- Currently experiencing around an 7-8 week lead time on all new slider orders.
-
Westcott Designs rock sliders for the all new 2023-'24 Toyota Sequoia. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. Options:- Raw DOM, MIG Welded - $1470 a set.
- Raw DOM, TIG Welded - $1670 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK59) for an additional $275.00 per set.
- Currently experiencing around an 5-6-week lead time on all new slider orders.
-
Westcott Designs rock sliders for 2007-'21 Toyota Tundra CrewMax, standard bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 15 degree), with or without top plates and a durable BK08 black powder coat finish. Options:- Raw HREW, MIG Welded - $1220 a set.
- Raw DOM, MIG Welded - $1370 a set.
- Raw DOM, TIG Welded - $1570 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $275.00 per set.
- Currently experiencing around an 5-6-week lead time on all new slider orders.
-
Full Length Modular Roof Rack Westcott Designs full length modular roof rack for the all-new 2023-'24 Toyota Sequoia. Designed to accommodate models with the *panoramic sunroof and for users that desire the optional floor inserts to increase your cargo space. The modular rack measures 4.5” tall to allow for full function of the standard and panoramic sunroof. Features aluminum construction for light weight (49.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 4.5” T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Optional floor inserts available
- Signature bottle openers
- Made in the U.S.A.
- All aluminum construction
- Choice of visor
- Lo-Pro model also available, see separate listing
- Currently 4-6 week production lead time
-
Westcott Designs rock sliders for the 200 series Toyota Land Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. In addition, the frame plates are also laser cut out of .188 *HRPO steel. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. Offered with or without top plates and an optional durable BK08 black powder coat finish. *Please note, these sliders are a weld on application only due the frame design of the 200 series Land Cruiser Options:- Raw HREW, MIG Welded - $1075 a set.
- Raw DOM, MIG Welded - $1199 a set.
- Raw DOM, TIG Welded - $1499 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $275.00 per set.
- Currently experiencing around an 5-6-week lead time on all new slider orders.
-
Out of stock
This front bumper is design to fit 2014-2019 Toyota Tundra 4×4 and 2 wheel drive trucks. Great for Off-Road this bumper has a high clearance. Built to be functional and with a great look. Like no other Tundra bumper on the market.- (Lights are not included)
-
NEW
The Westcott Designs Rock Sliders for the all-new 2024 Lexus GX 550. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. -
Westcott Designs rock sliders for the all new 2024-2025 Toyota Tacoma Long Bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. -
Check-out the Westcott Designs rock sliders for the all-new 2024-2025 Toyota Land Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. -
2024-2025 Toyota Tacoma 2WD Short Bed Rock Sliders
Westcott Designs rock sliders for the 2024-2025 Toyota Tacoma Short Bed (2WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit 4WD models, see separate listing) -
2024-2025 Toyota Tacoma 4WD Short Bed Rock Sliders by Westcott Designs
The Best Quality For Your New Truck!
Protect your 2024-2025 Tacoma Short Bed and elevate your off-road game with Westcott Designs premium rock sliders. Westcott Designs rock sliders for the all new 2024 Toyota Tacoma Short Bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. -
Westcott Designs rock sliders for 2nd & 3rd gen Toyota Tacoma Long Bed 4WD. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit short bed, see separate listing) Options:- Raw HREW, MIG Welded - $899 a set.
- Raw DOM, MIG Welded - $1049 a set.
- Raw DOM, TIG Welded - $1249 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Currently experiencing around an 3-4-week lead time on all new slider orders.
-
Westcott Designs 200 Series Land Cruiser basket style modular roof rack insert. The low-profile design mounts to your existing roof rack rails and enables you to expand your cargo space for wherever your next adventure takes you. It features extrude honed cross bars, aluminum construction for light weight and steel mounting inserts for strength and to maximize load capacity. We offer the rack in standard black powder coat finish with a plain visor or in our special Heritage Edition which features bronze powder coat finish and our signature Heritage Edition engraved visor. Optional floor panel inserts sold separately. • Optional Heritage Edition Custom Color & Visor ($100 Additional) • Optional floor inserts Standard Black ($455 Additional) • Black or Bronze powder coat finish available • Currently 4-6 week production lead time -
Westcott Designs NO KICK OUT rock sliders for 2nd & 3rd gen Toyota Tacoma Short Bed & Access Cab (4WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit double cab long bed, see separate listing) Options:- Raw HREW, MIG Welded - $849 a set.
- Raw DOM, MIG Welded - $999 a set.
- Raw DOM, TIG Welded - $1199 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Currently experiencing around an 3-4-week lead time on all new slider orders.
-
Westcott Designs rock sliders for 2nd & 3rd gen Toyota Tacoma Short Bed & Access Cab (4WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit double cab long bed, see separate listing) Options:- Raw HREW, MIG Welded - $849 a set.
- Raw DOM, MIG Welded - $999 a set.
- Raw DOM, TIG Welded - $1199 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Currently experiencing around an 3-4-week lead time on all new slider orders.
-
Westcott Designs Modular Carrier Rack. Universal fit works in any 2” standard receiver. Features a dual side design to allow the user the ability to add on or remove equipment as needed on the go. Tire arm is available with either center mount or right side offset. Carrier arm is built out of 3"x2" box .120" wall tubing and the tire arm is built out of 1.75" diameter .120" wall DOM tubing. Tire carrier features a wheel mounted attachment system with multiple different lug patterns available to accommodate most popular patterns. Multiple options for arms that include additional left spare tire rack, optional cooler rack with worktable, grill mount and more!* Pass through receiver tow hitch, rated to tow up to 10,000lbs. and feature secure CNC cut dove tail attachment points for arm(s). All carrier racks feature our Westcott anti wobble wedge (US patent #10,661,722) receiver hitch that ensures your equipment stays put no matter what kind of abuse you put it through. *Coming soon Please confirm your lug pattern before placing your order by using this quick tool here - https://tiresize.com/bolt-pattern-finder/ If you don't see your lug pattern listed in the drop down selection please select the "custom" option and be sure to put a good phone number for your order so we can contact you for lug pattern specs needed.- Modular Design
- Accessory mount plate
- Fits up to a 37” tall tire
- Black powder coat finish
- Made in the U.S.A.
- Lifetime Warranty
- Current lead times are 8-12 weeks on all new orders
-
Toyota 4Runner 2010-2024 (5th Gen) Full-Length Modular Roof Rack by Westcott Designs
Westcott Designs full length modular roof rack for the (2010-'24) 5th generation 4Runner. Offered with or without floor inserts, all racks include extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5” and can be configured to a “basket” mount set up as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately. **TRD PRO models require new factory OEM bolts to attach the rack to the roof of the vehicle (Part #63230-42010) available separately below. -
Out of stock
Equip your truck with this Tundra Prerunner Rear Bumper to protect your truck’s rear in style. Sporting a rugged build, this bumper makes your truck look more aggressive, letting it stand from the crowd. Aside from its attention-grabbing style, this rear bumper offers excellent rear-end protection by deflecting rocks, branches, and other off-road debris. -
NEW
Westcott Designs Bed Rack for the 4th Generation Toyota Tacoma. Compatible with both short and long beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. You'll also have your choice of the new Cab Height, where you can purchase the Roof Rack Extension to create a seamless roof rack from the Tacoma Roof Rack to the Bed Rack. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in short bed and long bed configurations. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately*- Molle Panels (Short Bed or Long Bed)
- Roof Rack Extension - which pairs with the 4th Gen Tacoma Roof Rack for a seamless rack from the roof to the end of the bed. Maximizing your space for long GFC tents and other accessories.
-
Westcott Designs rock sliders for the 2010-'24 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. -
Westcott Designs NO KICKOUT rock sliders for the 2010-'24 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. -
Westcott Designs NO KICK OUT rock sliders for 2010-'24 5th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. These No Kick Out sliders have a sleeker design that follow the body line of the vehicle more and give it a nice smooth look. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) -
Westcott Designs rock sliders for the 2003-09 4th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. Options:- Raw HREW, MIG Welded - $725 a set.
- Raw DOM, MIG Welded - $849 a set.
- Raw DOM, TIG Welded - $1049 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Due to high volume of orders expect a 4-5-week lead time on all new orders.
-
Westcott Designs rock sliders for the 2010-'24 5th generation 4runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) -
Westcott Designs rock sliders for FJ Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. Options:- Raw HREW, MIG Welded - $725 a set.
- Raw DOM, MIG Welded - $849 a set.
- Raw DOM, TIG Welded - $1049 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around)
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Currently experiencing around an 4-5-week lead time on all new slider orders.
-
Out of stock
Equip your truck with this Tundra Prerunner Rear Bumper to protect your truck’s rear in style. Sporting a rugged build, this bumper makes your truck look more aggressive, letting it stand from the crowd. Aside from its attention-grabbing style, this rear bumper offers excellent rear-end protection by deflecting rocks, branches, and other off-road debris. -
CURRENT LEAD TIMES: 4-5 Weeks
2024-2025 Toyota Land Cruiser Full Length Modular Roof Rack by Westcott Designs
Westcott Designs full length modular roof rack for the all-new 2024-2025 Toyota Land Cruiser . This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile Visor
- Signature bottle openers
- Accepting Pre-Orders. Be the first in line!
-
CURRENT LEAD TIIMES: 4-5 Weeks
Westcott Designs full length modular roof rack for the 2024-2025 Lexus GX550. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars. We carefully designed our rack to minimize wind noise and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile Visor
- PRE-ORDER the 10-Light Visor TODAY!
- Signature bottle openers
-
Full Length Lo-Pro Roof Rack
Westcott Designs full length lo-pro roof rack for the all new 2023-'24 Toyota Sequoia. This lo-profile roof rack has a sleek design that hugs your existing roof line and minimizes additional vehicle height. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 2.5"T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Not compatible with Panoramic sunroof equipped vehicles- Signature bottle openers
- Made in the U.S.A
- All aluminum construction
- Choice of visor height
- Modular model also available, see separate listing
- Currently 4-6 week production lead time
-
Westcott Designs 200 Series Land Cruiser full length roof rack. The low-profile design enables you to expand your cargo space for wherever your next adventure takes you. We carefully designed our roof rack to minimize wind noise at all speeds. The rack features extrude honed cross bars, aluminum construction for light weight and steel mounting inserts for strength and to maximize load capacity. Includes full hardware for an easy, no-drill install, comes powder coated black for a long lasting, durable finish, and of course a pair of our signature, Westcott Designs stainless steel bottle openers! Proudly made in the U.S.A.- Low profile design
- No-drill install
- Lightweight
- Durable finish
- Made in the U.S.A.
- Currently 4-6 week production lead time
-
CURRENT LEAD TIMES: 6-8 WEEKS ---Westcott Designs TRD preload collar lift kit for the 2022-2025 Toyota Tundra! This conversion kit will fit ALL standard rear coil suspension model Tundra's (SR, SR5, Limited, Platinum & TRD Off-Road). This kit is designed to be used with the optional TRD shocks (#PTR13-34330) and struts (#PTR13-34310) that are available directly from Toyota. There is no need to spend thousands of dollars on this kit from your dealer when you can purchase it here for a fraction of the cost. We offer this kit in (2) different configurations, you can purchase it as a complete kit with shocks or you can purchase just our preload collar kit and source the shocks on your own from your local dealer. This kit features CNC machined lower preload collars, top shim plates, rear billet lift pucks and a brake like relocation bracket. These kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. These kits give you a true 3" of front lift and 1.5" of rear lift and ride better than factory! All kits comes with complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory if not better ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset and our Westcott Designs Tundra Tire Clearance Kit) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Please note, you will need the Toyota TRD red axles in order to make this kit work, those part numbers are 43420-0C020 (Left) and 43410-0C020 (Right) which are available from your local Toyota dealer. *Patent Pending This kit provides the following lift:- 2022-'24 Tundra TRD suspension equipped trucks: 3.0” (front lift) and 1.50” (rear lift)
- This kit fits ALL standard rear coil suspension model Tundra's (SR, SR5, Limited, Platinum, & TRD Off-Road)
- Lead times for new orders vary from 4-5 weeks for raw finish kits and 5-6 weeks for black anodize finish kits
-
Westcott Designs Bed Rack the 2022-'24 Toyota Tundra. Compatible with both 5.5’ and 6.6’ length beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36", 40" and 42" lengths to accommodate all configurations of accessories and bed lengths. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately *Current lead times on all new orders is 4-6 weeks from date of order to date of shipment* -
Full Length Modular Roof Rack
Westcott Designs full length modular roof rack for the Lexus GX 470. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. We carefully design our racks to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Low Profile
- Aluminum Construction
- Signature bottle openers
- Currently 4-6 week production lead time
-
Full Length Modular Roof Rack
Westcott Designs full length modular roof rack for the Lexus GX 460. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Includes extrude honed cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Signature bottle openers
- Currently 4-6 week production lead time
-
2010-2024 Toyota 4Runner 5th Gen Full Length Lo-Pro Roof Rack by Westcott Designs
Westcott Designs full length lo-pro roof rack for the (2010-2024) 5th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately. *TRD PRO models require new factory OEM bolts to attach the rack to the roof of the vehicle (Part #63230-42010) available separately below. -
Westcott Designs full length roof rack for 2007-21’ Toyota Tundra CrewMax. This low-profile roof rack has a sleek design that hugs your existing roof line and still allows full function of your sunroof. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Includes (8) extrude honed cross bars to accept a wide array of accessories and your choice of front valance to accept lighting options of your choice*. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails and complete hardware. *Lights sold separately. Please Note: This is a “Drill To Mount” roof rack and we suggest that you have professionally installed. We will not be held responsible for any damage to your vehicle.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Signature bottle openers
- Currently 4-6 week production lead time
-
NEW
Full Length Lo-Pro Roof Rack for the 2019-2025 Toyota RAV4
Westcott Designs full length lo-pro roof rack for the 2019-2025 5th generation Toyota RAV4. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately. -
Full Length Lo-Pro Roof Rack
Westcott Designs full length lo-pro roof rack for the popular 2003-2009 4th generation 4Runner. Offered with an array of visor options for a variety of different lighting solutions. All racks include extrude honed cross bars and *complete hardware for an easy NO DRILL install. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight (44.2lbs) with steel mounting brackets for strength and to maximize load capacity. Our lo-pro rack features a low profile installed height of just 1.75” and still allows you to mount an RTT and other popular accessories as well. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. Lights sold separately.- No cut out visor (plain)
- Single row 40" (Standard) light bar cut out
- Single row 42" (Rigid Adapt or similar) light bar cut out
- Single row 44" (Cali-Raised or similar) light bar cut out
- (10) light 4” cut out (Baja Designs Squadron, Rigid 360 Series or similar)
- (6) light 6” cut out (Baja Designs LP6, Rigid 6" or similar)
- Signature bottle openers
- Currently 4-6 week production lead time
-
Full Length Modular Roof Rack
Westcott Designs FJ Cruiser modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations by following the contour of the roof line. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Currently 4-6 week production lead time
-
2024-2025 Toyota Tacoma Roof Rack by Westcott Designs
Westcott Designs roof rack for the 2024-2025 Tacoma! Features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels. Westcott Designs roof rack for the all new 2024 Tacoma! New features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels.- No cut out visor
- Single row 40-inch light bar cut out
- Rigid Adapt light bar cut out
- (10) light 4” cut out
- Signature bottle openers with or without the truck logo
- Currently 4 week production lead time
-
Full Length Modular Roof Rack
Westcott Designs 2nd & 3rd Gen Tacoma modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations and our rack has been tested to achieve just over 2mpg better than our competitors’ offerings. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”.All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Signature bottle openers
- Currently 4-6 week production lead time
-
NEW
Check-Out the ALL New 2024-2025 GMC 2500 & 3500 AT4X Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The GMC 2500 AT4X Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. This Light Bar works on the following GM trucks: -
NEW
Check-Out the ALL New 2024 Chevy 3500 Bison AEV Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The Chevy 3500 Bison AEV Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength.
-
Check-Out the ALL New 2024 Chevy 2500 Bison AEV Bumper Light Bar from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The Chevy 2500 Bison AEV Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength.
-
Check-Out the ALL New 2024-2025 GMC 2500 AT4X Bumper Light Bar (AEV Edition) from Westcott Designs! (Lights Sold Separately) This light bar is made from the same high-quality materials we use on our rock sliders. The GMC 2500 AT4x (AEV Edition) Light Bar was hand crafted and engineered here in-house at Westcott Designs in Phoenix, Arizona. They are laser cut, hand built, and hand welded which lives up to the high-quality standards we have here at Westcott Designs. Using a .120 wall tubing with DOM steel and TIG welded for the greatest strength. -
Westcott Designs Bed Rack for 2nd and 3rd Generation Toyota Tacoma. Compatible with both 5.5’ and 6.5’ length beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36", 40" and 42" lengths depending on your particular needs. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately *4-6 week lead time on all new orders currently *Short bed trucks only accept a 36" Molle Panel* -
Our high quality Wheel Stands allow you to adjust the suspension with ease. With these stands you can string, square, check angles and make all the necessary adjustments. This listing is for a pair of stands. -
Westcott Designs roof rack floor inserts for 2021-'23 Chevrolet Tahoe & GMC Yukon modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. -
Westcott Designs roof rack floor inserts for 2023-'24 Toyota Sequoia modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. *Not compatible with the Lo-Pro model roof rack -
Westcott Designs full length rear hatch ladder for the 2007-'21 Toyota 200 Series Land Cruiser. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 3-4 weeks of date of order placed.
-
NEW
Check out the 2024-2025 Lexus GX 550 REAR HATCH LADDER by Westcott Designs Westcott Designs rear hatch ladder for the All-New 2024-2025 Lexus GX 550. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
Check out the 2024 TOYOTA LAND CRUISER REAR HATCH LADDER by Westcott Designs Westcott Designs rear hatch ladder for the All-New 2024 Toyota Land Cruiser. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
-
2023-2025 Toyota Sequoia Rear Hatch Ladder by Westcott Designs Westcott Designs rear hatch ladder for the all new 2023-2025 Toyota Sequoia! Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! SEQUOIA LADDER MOUNT TEMPLATE How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 3-4 weeks of date of order placed.
-
Westcott Designs roof rack floor inserts for 5th gen 4Runner modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. *Not compatible with the lo-pro model -
Rigid Industries Chase Brake Light, Turn Signal And Back Up W/Harness -
NEW
Checkout the 2010-2024 (5th Gen) Toyota 4Runner Molle Panels by Westcott Designs - Attaches to the4Runner Modular Roof Rack Or 4Runner Lo-Profile Roof Rack Check out the Westcott Designs molle panels for the 2010-2024 (5th Gen) Toyota 4Runner. You can choose Driver-Side, Passenger-Side or the full Pair to add to your 4Runner Overland Set-up. Laser cut and powder coated for a strong durable finish attached to the 4Runner Lo-Profile Roof Rack or Modular Roof Rack. Includes two 4.5” Industrial Vacuum Pump Suction Mounts. Allows you to mount various accessories and attachments to the side of your 4Runner. Available in Driver-Side, Passenger-Side or get the Set! *Disclaimer: MUST HAVE either the Lo-Profile Roof Rack OR Modular Roof Rack for the 4Runner by Westcott Designs to attach the molle panels to the 5th Gen 4Runner.NEW
2024-2025 Lexus GX 550 Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the All-New 2024 Lexus GX 550. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached at both the All-New 2024 Lexus GX 550 Full-Modular Roof Rack and two 4.5” Industrial Vacuum Pump Suction Mounts included. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set!
2024-2025 Toyota Land Cruiser Molle Panels by Westcott Designs Check out the Westcott Designs molle panels for the All-New 2024-2025 Toyota Land Cruiser. You can choose Driver-Side, Passenger-Side or the full Pair to add to your Land Cruiser Overland Set-up. Laser cut and powder coated for a strong durable finish attached at both the All-New 2024-2025 Toyota Land Cruiser Full-Modular Roof Rack and two 4.5” Industrial Vacuum Pump Suction Mounts included. Allows you to mount various accessories and attachments to the side of your All-New Toyota Land Cruiser. Available in Driver-Side, Passenger-Side or get the Set!
Westcott Designs 5th Gen (2010-'24) 4Runner rear hatch ladder. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 2-3-weeks of date of order placed.
2024-2025 Toyota Tacoma TRD PRO Preload Collar Lift Kit by Westcott Designs Westcott Designs preload collar lift kit for the all-new 2024-2025 Toyota Tacoma TRD PRO! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tacoma PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 1.75” of lift in the front and .75" in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with the proper offset wheel.
CURRENT LEAD TIMES: 6-8 Weeks 2024-2025 Toyota Land Cruiser Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset.
CURRENT LEAD TIMES: 6-8 WEEKS Check out the ALL NEW 2024 Lexus GX 550 Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with a 17x8.5+35 MM offset.
2024-2025 Toyota Tacoma Preload Collar Lift Kit - TRD Off-Road, TRD Sport & SR5
Westcott Designs preload collar lift kit for the all-new 2024-2025 Toyota Tacoma! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with the proper offset wheel.
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs preload collar lift kit for the all-new 2023-'24 Toyota Sequoia TRD PRO! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. Our Westcott kit gives you additional 3” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset along with our clearance kit and BMC) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with purchase This kit provides the following lifts:- 2023-'24 Sequoia Fox PRO suspension equipped trucks: 3” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 4-5 weeks for raw finish kits and 5-6 weeks for black anodize finish kits
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs preload collar lift kit for the all-new 2022-'24 Toyota Tundra TRD PRO & 1794 Limited equipped with Fox shocks! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tundra PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 2.5” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA!
Westcott Designs 4th Gen (2003-'09) 4Runner rear hatch ladder. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! *Please note this ladder does NOT fit rear hatches with the optional factory spoiler* Installation Instructions How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 2-3-weeks of date of order placed.
Out of stock
Grill Mount for Universal Hitch Mounted Rear RackKey Features
- Digital Elite controller keeps the preset temperature within +/- 20 degrees Fahrenheit for reliable cooking
- E-Z drain grease management system draws all of your excess liquids into a bucket underneath
- Versatile grill allows you to smoke, grill, bake, roast or braise for multiple cooking options
- Large capacity hopper allows you to hold up to 8 lbs of pellets at once
Westcott Designs preload collar lift kit for the all-new 2023-2025 Toyota Sequoia! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks and hard anodized black for a strong, durable finish. This kit gives you 2.5” of lift in the front and 1” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! Note: These new Sequoia's share a lot of the same suspension components as the new platform Tundra. If you need help figuring out what kit fits your specific model, please watch the link below to learn how to identify what kit you need. WHAT KIT DO I BUY? *Watch This Video* *Patent Pending *No shocks are included with any preload collar lift kits This kit provides the following lifts:- 2023-2025 Sequoia static suspension equipped trucks: 2.5” (front lift) and 1.00” (rear lift)
- 2023-2025 Sequoia AVS/Air Ride equipped trucks: 2.0" (front lift) and 7/8" (rear lift)
- Lead times for new orders vary from 4-5 weeks for raw finish kits and 5-6 weeks for black anodize finish kits
Westcott Designs preload collar lift kit for the all-new 2022-2025Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks and hard anodized black for a strong, durable finish. This kit gives you 2.5” of lift in the front and 1” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) *Now available for AVS/Air Ride and TRD Sport models, see drop down menu for options!* These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with any preload collar lift kits *Now verified to fit Hybrid models Note: Product photos are of prototype unit, finished product will be hard anodized black as advertised. This kit provides the following lifts:- 2022-2025 Tundra static suspension equipped trucks: 2.5” (front lift) and 1.00” (rear lift)
- 2022-2025 Tundra AVS/Air Ride equipped trucks: 2.0" (front lift) and 7/8" (rear lift)
- Lead times for new orders vary from 4-6 weeks for raw finish kits and 6-8 weeks for black anodize finish kits
CURRENT LEAD TIMES: 6-8 WEEKS --- --- Westcott Designs preload collar lift kit for the 200 series Toyota Land Cruiser (2008-'21). The kit features CNC machined lower preload collars, top spacer plates, and rear billet lift pucks that are all hard anodized black for a strong, durable finish. The kit includes compete hardware for an easy install. This is not a typical spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s and you can run up to a 285/70R18* tire without a Body Mount Chop (BMC) with minor trimming. *1.25" wheel spacers required This kit provides the following lifts: • 2008-'21 LC200: 3.0” (front lift) and 1.25” (rear lift)
Westcott Designs roof rack floor inserts for 200 Series Land Cruiser basket style roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs basket roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA
CURRENT LEAD TIMES: 6-8 WEEKS Westcott Designs 4Runner Limited with XREAS preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-'24 4runner Limited : 3” (front lift) and 1.25” (rear lift)
- Lead times for new orders vary from 2-3 weeks for black anodize finish kits
Westcott Designs Tundra SR5 preload collar lift kit. This kit is designed for the 2007-21’ Tundra sR5 with the standard black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra SR5: 3” (front lift) and 1" (rear lift)
Westcott Designs Tacoma SR5/SR preload collar lift kit. This kit is designed for the 2004-2023 Tacoma SR5/SR with the black body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2004-'23 Tacoma SR5/SR: 3” (front lift) and 1" (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
Westcott Designs Tundra TRD Sport preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra TRD Sport: 3” (front lift) and 1" (rear lift)
Westcott Designs Tundra TRD Off-Road preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-2021 Tundra TRD Off-Road: 3” (front lift) and 1" (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
CURRENT LEAD TIMES: 6-8 WEEKS Westcott Designs Tacoma TRD Sport preload collar lift kit. This kit is designed for the 2004-'23 Tacoma TRD Sport with the blue body Hitachi shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tacoma will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2004-'23 Tacoma TRD Sport: 3” (front lift) and 1" (rear lift)
Title
