- 2007-'21 Tundra SR5: 3” (front lift)
×
-
Westcott Designs Tundra SR5 FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra SR5 with black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift: -
Westcott Designs Tundra SR5 preload collar lift kit. This kit is designed for the 2007-21’ Tundra sR5 with the standard black body shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra SR5: 3” (front lift) and 1" (rear lift)
-
Westcott Designs Tundra TRD Off-Road FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra TRD Off-Road: 3” (front lift)
-
Westcott Designs Tundra TRD Off-Road preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Off-Road with the yellow body 4600 series Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearance required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:
- 2007-2021 Tundra TRD Off-Road: 3” (front lift) and 1" (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Westcott Designs Tundra TRD Sport FRONT ONLY preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA). This is a great solution to use when incorporating a replacement leaf pack in the rear or if you are just looking to level the front end of your Tundra (You would leave out the top shim plate for a level stance without any rear lift). After install you will be able to run up to a 35" tall tire* The kit includes a pair of lower preload collars, top shim plates, bump stop spacers and hardware to complete the install . This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra TRD Sport: 3” (front lift)
-
Westcott Designs Tundra TRD Sport preload collar lift kit. This kit is designed for the 2007-21’ Tundra TRD Sport with the red body Bilstein shocks from the factory. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1” in the rear. After install your Tundra will sit level front to rear and you can run up to a 35" tall tire* It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. *Front bumper relocation kit and additional clearancing required to run a 35" tire. Suggested tire is a 295/70R18. This kit provides the following lift:- 2007-'21 Tundra TRD Sport: 3” (front lift) and 1" (rear lift)
-
Westcott Designs rock sliders for the 2003-'09 4th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. Options:- Raw HREW, MIG Welded - $725 a set.
- Raw DOM, MIG Welded - $849 a set.
- Raw DOM, TIG Welded - $1049 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Due to high volume of orders expect a 4-5-week lead time on all new orders.
-
Westcott Designs Front Bumper Relocation Brackets for 2007 & Up Toyota Tundra. Enables you to run a 35” tall tire without trimming the bumper flange or inner fender liner. Laser cut out of .250” mild steel for a precise fit and powder coated black for durability that will last for years to come. Comes as a pack of four, (2) units required for each side to shim your bumper out a total of .500”. Duplicated to the factory OEM design to transfer the energy into the crumple zones in case of a frontal collision. Made in the U.S.A. and come with a Lifetime Warranty.- Compatible with both factory and most bolt-on accessory type bumpers
- Easy installation using existing OEM hardware
- Made in the U.S.A
- Lifetime Warranty
-
Westcott Designs rock sliders for FJ Cruiser. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. Options:- Raw HREW, MIG Welded - $725 a set.
- Raw DOM, MIG Welded - $849 a set.
- Raw DOM, TIG Welded - $1049 a set.
- Top plates are optional for an extra $150.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around)
- Traditional black powder coat (BK08) for an additional $250.00 per set.
- Currently experiencing around an 4-5-week lead time on all new slider orders.
-
Westcott Designs full length rear hatch ladder for the 2007-'21 Toyota 200 Series Land Cruiser. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 3-4 weeks of date of order placed.
-
Westcott Designs rock sliders for 2007-'21 Toyota Tundra CrewMax, standard bed. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 15 degree), with or without top plates and a durable BK08 black powder coat finish. Options:- Raw HREW, MIG Welded - $1220 a set.
- Raw DOM, MIG Welded - $1370 a set.
- Raw DOM, TIG Welded - $1570 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK08) for an additional $275.00 per set.
- Currently experiencing around an 5-6-week lead time on all new slider orders.
-
Westcott Designs 4Runner Limited with XREAS preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-'24 4runner Limited : 3” (front lift) and 1.25” (rear lift)
- Lead times for new orders vary from 2-3 weeks for black anodize finish kits
-
Westcott Designs 4Runner Limited with XREAS Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:- 2010-'24 4Runner Limited : 3” (front lift)
- Lead times for new orders vary from 2-3 weeks for black anodize finish kits
-
*Verified to fit '24 model year* Westcott Designs 4Runner SR5, TRD Off-Road, Trail, Venture & Premium preload collar lift kit. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and 1.25” in the rear. After install your 4Runner will sit level front to rear and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars for the front and our billet rear lift block with hardware for the rear. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, it keeps your factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2010-'24 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift) and 1.25” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
*Verified to fit '24 model year* Westcott Designs 4Runner SR5, TRD Off-Road, Trail, Venture & Premium Front Only Preload Collar Lift Kit. This kit is designed to be used in conjunction with your choice of rear springs to suit your specific needs. It gives you 3” of lift in the front without the need of a replacement Upper Control Arm (UCA) and you can run the popular 33” tall tire (285/70R17). It features our billet preload collars with all required hardware to complete the installation. This kit uses the preload in your spring to give you the lift that you are after, you retain your factory ride quality, factory suspension geometry, and you can still align it to spec after install. Made in the USA. This kit provides the following lift:
- 2010-'24 4runner SR5, TRD Off-Road, Trail, Venture & Premium: 3” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Westcott Designs NO KICKOUT rock sliders for the 2010-'24 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. -
Westcott Designs rock sliders for the 2010-'24 Lexus GX460. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. -
Westcott Designs A-pillar ditch light brackets for 2010-'24 Toyota 4Runner 5th Gen. CAD designed, laser cut, and powder coated black for a durable finish. These are hands down the best built and strongest mounts out on the market. Some might even say overbuilt but we never would! Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. Low profile design mount incorporates our carriage bolt light mount which not only makes for a cleaner installed look but also reduces wind noise. Choose from a wide variety of light options to suit your specific needs*. *Lights not included. -
Westcott Designs 5th Gen (2010-'24) 4Runner rear hatch ladder. Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 2-3-weeks of date of order placed.
-
Westcott Designs NO KICK OUT rock sliders for 2010-'24 5th generation 4Runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. These No Kick Out sliders have a sleeker design that follow the body line of the vehicle more and give it a nice smooth look. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) -
Westcott Designs rock sliders for the 2010-'24 5th generation 4runner. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. Compatible with both non KDSS & KDSS equipped vehicles. No matter what variation you select our sliders in, they will offer you excellent protection no matter what kind of abuse you put them through and will last for years to come. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will NOT fit 2021 Limited or Nightshade models with Xreas) -
This is for a Factory Fox TRD PRO, exclusively for the 2020-'23 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:- 2020-'23 Tacoma: 1.5” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and up to 2-3 weeks for black anodize finish kits
-
This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-'23 Tacoma. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. *Please note, on 2022 and newer models with the red TRD Upper Control Arms (UCA's), your spring may make contact with the UCA at full droop (extension). This does not effect the performance or function of your suspension at all, just something to be aware of.* This kit provides the following lifts:
- 2020-'23 Tacoma: 1.5” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and up to 3-4 weeks for black anodize finish kits
-
Westcott Designs Front Fender Liner Pullback Kit for 2020-22' GM 1500 trucks. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 35" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
This is for a Factory Fox TRD PRO, exclusively for the 2020-22' Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop. This kit provides the following lifts:- 2020-22' Sequoia: 1.5” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks
-
This is for a Factory Fox TRD PRO (FRONT ONLY), exclusively for the 2020-22' Sequoia. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 34” tire (295/70R18) without a body chop. This kit provides the following lifts:
- 2020-22' Sequoia: 1.5” (front lift)
- Lead times for new orders vary from 1-2 weeks
-
Westcott Designs Front Fender Liner Pullback Kit for 2020-24' GM 2500 & 3500 trucks. Enables you to run up to a 37" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 37" tall tire
- Easy installation and includes hardware
- Made in the U.S.A
- Lifetime Warranty
-
Full Length Modular Roof Rack Westcott Designs full length modular roof rack for the 2021-'23 Chevrolet Tahoe & GMC Yukon. Designed to accommodate models with the *panoramic sunroof and for users that desire the optional floor inserts to increase your cargo space. The modular rack measures 4.5” tall to allow for full function of the standard and panoramic sunroof. Features aluminum construction for light weight (52lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 103"L x 52"W x 4.5” T, includes (11) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise at both city and freeway speeds. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite when out on the trails.- Optional floor inserts available
- Signature bottle openers
- Made in the U.S.A.
- All aluminum construction
- Currently 4–6-week production lead time
-
Westcott Designs roof rack floor inserts for 2021-'23 Chevrolet Tahoe & GMC Yukon modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. -
*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs NEW TRD PRO 4Runner 2” (FRONT ONLY) lift kit for the 2021-'24 model years. This kit is designed to give you an additional 2” front only lift rather than our standard 1.5” lift. The intention of this kit is to enable you to either run a larger tire (Up to a 285/75R17) or to help correct the ride height of your TRD PRO if you add additional front-end weight with a bumper and/or winch. *If you are looking to use this kit to lift your 4Runner to run the larger tire options, you will need to run a 2” rear spring so the vehicle will sit correctly front to rear. We use and have had a lot of luck with either Icon (#52700) or OME (#2895) springs. All Westcott Designs products are proudly manufactured in-house to the highest specifications. All our preload collar lift kits are CNC machined out of billet aluminum and are hard anodized black or are available in raw aluminum finish as well. This kit provides the following lifts:- 2021-'24 4Runner: 2” (front lift only)
- Lead times for new orders vary from 2-3 weeks for black anodize finish kits
-
*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs 4Runner TRD PRO FOX lift kit for the 2021-'24 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. As for the rear, we CNC machine all of the parts and hard anodize them to have a great look and to maximize the life of them to make sure they outlast the vehicle. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load. This kit provides the following lifts:
- 2021-'24 4runner: 1.6-1.7” (front lift) and 1.25” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
*VERIFIED TO FIT 2024 MODEL YEAR* Westcott Designs 4Runner TRD PRO FOX (FRONT ONLY) lift kit for the 2021-'24 model years. The suspension has been redesigned and re-valved for 2021-'24 model years. They also redesigned the spring and lower spring perch as well. We have been doing testing for the last year on this set up and it is dialed in to say the least! Our kits are the highest quality kits on the market. We manufacture everything in house to make sure the quality is top notch. Our TRD PRO lift kits look nicer then OEM. If you did not know what to look for you wouldn’t even know it wasn’t factory. Our front kit is all billet machined out of solid stock aluminum and hard anodized in black to look factory. We don’t agree with taking short cuts and making parts out of plastic in the front or rear that will just break down or fail over time. I don’t know about you but I know I would not spend $55k on a vehicle and replace parts with plastic parts especially when they are under a lot of load. This kit provides the following lifts:
- 2021-'24 4runner: 1.6-1.7” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Westcott Designs Front Fender Liner Pullback Kit for 2021-'24 GM Yukon, Yukon XL, Tahoe & Suburban SUV's. Enables you to run up to a 35" tire with minimal trimming. CNC laser cut and powder coated a durable satin black finish for durability, includes hardware. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 35" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
Westcott Designs Toyota TRD PRO Grill Upper Light Bar Bracket Kit. This bracket kit allows you to mount a 20" light bar of your choice with your TRD PRO grill conversion in your new 2022-'24 Tundra or 2023-'24 Sequoia. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and comes with complete hardware for an easy installation. We have test fit and verified fitment of Rigid Industries SR series, Baja Designs S8 and Heretic brand light bars, may fit other brands as well but not verified at this time. Be sure to check out our front camera relocation bracket as well that will complete your grill conversion as needed. *Light bar not included -
*Sold Individually* Westcott Designs SINGLE rear lift puck for the 2022-'24 Tundra & 2023-'24 Sequoia. Your choice of 1" or 1-5/8" of rear lift only on standard rear coil suspension equipped Tundra's & Sequoia's. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. Price for individual units, for a pair you need to order quantity of (2). *Do NOT attempt to stack pucks for more lift, you will damage other rear suspension components and it is extremely unsafe* -
Westcott Designs Front Tire Clearance Kit for the 2022-'24 Toyota Tundra & 2023-'24 Sequoia. Enables you to run up to a 37" tire with full turning radius and clearance. Includes CNC laser cut weld in frame plates, inner Fenderwell pull back brackets and associated hardware to complete the job. Made in the U.S.A. and comes with a Lifetime Warranty.- Run up to a 37" tall tire
- Easy installation and includes hardware
- Made in the U.S.A.
- Lifetime Warranty
-
Installation Instructions Westcott Designs light bar brackets for the 2022-'24 Tundra & Sequoia. These brackets install behind your front grill and allow you to mount a 20" light bar of your choice. Laser cut of .125" mild steel, and bent on our 5-Axis press brake for an exact fit. Powder coated in a durable black finish for long lasting protection and uses OEM hardware for a strong and solid mounting platform. We have test fit them with both the Rigid Industries SR series and Baja Designs S8 series light bars, should also accept other popular brands as well. *Light bar not included -
Westcott Designs A-pillar ditch light brackets for the new 2022-'24 Toyota Tundra & Sequoia. CAD designed, laser cut, tig welded and powder coated black for a durable finish. These are hands down the best built and strongest mounts out on the market. Some might even say overbuilt but we never would! Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. Low profile design mount incorporates our carriage bolt light mount which not only makes for a cleaner installed look but also reduces wind noise. Choose from a wide variety of light options to suit your specific needs*. *Lights not included.Installation Instructions
-
Front Camera Relocation Bracket
Westcott Designs front camera bracket allows you to transfer your factory OEM front camera from a standard Tundra or Sequoia grill to the OEM TRD PRO grill (Part# 53101-0C220). Why pay over $500 from the dealer as its only sold as a complete unit when you can spend just $19.95 here for the same result! Bracket is made of 100% stainless steel and comes in a durable black powder coat finish. *T6 torx driver required, not included. -
Westcott Designs AVS rear link arms for the 2022-'24 Tundra and 2023-'24 Sequoia. Gives you 7/8" of rear lift only on a rear air suspension equipped Tundra & Sequoia. Laser cut stainless steel, made in the U.S.A and come with a lifetime warranty. -
Westcott Designs fog light brackets for the new 2022-'24 Toyota Tundra. Designed to accept (2) Baja Designs S2 light assemblies per side*, CAD designed, laser cut & bent and powder coated black for a durable finish. Drastically improve the performance of your current fog light set up while maintaining your OEM light location and fit. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. *Lights not included. -
Westcott Designs Bed Rack the 2022-'24 Toyota Tundra. Compatible with both 5.5’ and 6.6’ length beds and features a low profile with just 12” tall towers measured from the top of the bed rails. Perfect height to mount your RTT on while retaining the sleekest profile possible. Constructed out of 11ga. Cold Rolled Mild Steel that is Laser Cut and TIG welded by hand for ultimate strength. Powder coated black for ultimate protection out in the elements. Towers feature tie-down windows to enable more gear to be carried securely. Optional side mounted Molle Panels enable you to mount even more accessories like *fuel jugs, jacks, shovels and more. Available in 36", 40" and 42" lengths to accommodate all configurations of accessories and bed lengths. All racks come with complete Grade 8 hardware and are easy to install. Made in the USA. *Accessories sold separately *Current lead times on all new orders is 4-6 weeks from date of order to date of shipment* -
Westcott Designs Front Only preload collar lift kit for the all-new 2022-'24 Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 3” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with any preload collar lift kits *Not compatible with AVS equipped rear trucks, see complete kit listing for purchase This kit provides the following lifts:- 2022-'24 Tundra static suspension equipped trucks: 3.0” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Westcott Designs no kickout rock sliders for the all-new 2022-'24 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** Options:- Raw DOM, MIG Welded - $1470 a set.
- Raw DOM, TIG Welded - $1670 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK59) for an additional $275.00 per set.
- Currently experiencing around an 7-8 week lead time on all new slider orders.
-
Westcott Designs preload collar lift kit for the all-new 2022-'24 Toyota Tundra! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks and hard anodized black for a strong, durable finish. This kit gives you 2.5” of lift in the front and 1” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) *Now available for AVS/Air Ride and TRD Sport models, see drop down menu for options!* These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with any preload collar lift kits *Now verified to fit Hybrid models Note: Product photos are of prototype unit, finished product will be hard anodized black as advertised. This kit provides the following lifts:- 2022-'24 Tundra static suspension equipped trucks: 2.5” (front lift) and 1.00” (rear lift)
- 2022-'24 Tundra AVS/Air Ride equipped trucks: 2.0" (front lift) and 7/8" (rear lift)
- Lead times for new orders vary from 3-4 weeks for raw finish kits and 4-5 weeks for black anodize finish kits
-
Westcott Designs rock sliders (With Kickout) for the 2022-'24 Toyota Tundra. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our new Tundra sliders feature a .188 wall main tube along with .120 wall outer tubes for increased reinforcement and exact tolerances in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. *By selecting if you have a Hybrid or Non-Hybrid model this ensures that we ship your new sliders with the correct mounting hardware. **Does NOT fit double cab OR long bed models** Options:- Raw DOM, MIG Welded - $1470 a set.
- Raw DOM, TIG Welded - $1670 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK59) for an additional $275.00 per set.
- Currently experiencing around an 7-8 week lead time on all new slider orders.
-
Westcott Designs TRD preload collar lift kit for the 2022-'24 Toyota Tundra! This conversion kit will fit ALL standard rear coil suspension model Tundra's (SR, SR5, Limited, Platinum & TRD Off-Road). This kit is designed to be used with the optional TRD shocks (#PTR13-34330) and struts (#PTR13-34310) that are available directly from Toyota. There is no need to spend thousands of dollars on this kit from your dealer when you can purchase it here for a fraction of the cost. We offer this kit in (2) different configurations, you can purchase it as a complete kit with shocks or you can purchase just our preload collar kit and source the shocks on your own from your local dealer. This kit features CNC machined lower preload collars, top shim plates, rear billet lift pucks and a brake like relocation bracket. These kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. These kits give you a true 3" of front lift and 1.5" of rear lift and ride better than factory! All kits comes with complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory if not better ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset and our Westcott Designs Tundra Tire Clearance Kit) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Please note, you will need the Toyota TRD red axles in order to make this kit work, those part numbers are 43420-0C020 (Left) and 43410-0C020 (Right) which are available from your local Toyota dealer. *Patent Pending This kit provides the following lift:- 2022-'24 Tundra TRD suspension equipped trucks: 3.0” (front lift) and 1.50” (rear lift)
- This kit fits ALL standard rear coil suspension model Tundra's (SR, SR5, Limited, Platinum, & TRD Off-Road)
- Lead times for new orders vary from 4-5 weeks for raw finish kits and 5-6 weeks for black anodize finish kits
-
Westcott Designs preload collar lift kit for the all-new 2022-'24 Toyota Tundra TRD PRO & 1794 Limited equipped with Fox shocks! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tundra PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 2.5” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! -
Westcott Designs FRONT ONLY preload collar lift kit for the all-new 2022-'24 Toyota Tundra TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tundra PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 2.5” front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset with minor trimming) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with purchase This kit provides the following lifts:- 2022-'24 Tundra Fox PRO suspension equipped trucks: 2.5” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Westcott Designs Front Only preload collar lift kit for the all-new 2023-'24 Toyota Sequoia! This kit features CNC machined lower preload collars, top shim plates and hard anodized black for a strong, durable finish. This kit gives you a full 3” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! Note: These new Sequoia's share a lot of the same suspension components as the new platform Tundra. If you need help figuring out what kit fits your specific model, please watch the link below to learn how to identify what kit you need. WHAT KIT DO I BUY? *Watch This Video* *Patent Pending *No shocks are included with any preload collar lift kits *Not compatible with AVS equipped rear trucks, see complete kit listing for purchase This kit provides the following lifts:- 2023-'24 Sequoia static suspension equipped trucks: 3.0” (front lift)
- Lead times for new orders vary from 4-5 weeks for raw finish kits and 5-6 weeks for black anodize finish kits
-
Full Length Lo-Pro Roof Rack
Westcott Designs full length lo-pro roof rack for the all new 2023-'24 Toyota Sequoia. This lo-profile roof rack has a sleek design that hugs your existing roof line and minimizes additional vehicle height. Features aluminum construction for light weight (46.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 2.5"T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails. *Not compatible with Panoramic sunroof equipped vehicles- Signature bottle openers
- Made in the U.S.A
- All aluminum construction
- Choice of visor height
- Modular model also available, see separate listing
- Currently 4-6 week production lead time
-
Full Length Modular Roof Rack Westcott Designs full length modular roof rack for the all-new 2023-'24 Toyota Sequoia. Designed to accommodate models with the *panoramic sunroof and for users that desire the optional floor inserts to increase your cargo space. The modular rack measures 4.5” tall to allow for full function of the standard and panoramic sunroof. Features aluminum construction for light weight (49.7lbs) with steel mounting brackets for strength and to maximize load capacity. Measures 92"L x 52"W x 4.5” T, includes (10) extrude honed cross bars to accept a wide array of accessories. We carefully designed our rack to minimize wind noise, your choice of hi-cut visor that has minimal wind noise or our full-length visor for no wind noise whatsoever. All racks come with a set of our signature Stainless Steel Westcott Designs bottle openers to help you enjoy your favorite refreshments when out on the trails.- Optional floor inserts available
- Signature bottle openers
- Made in the U.S.A.
- All aluminum construction
- Choice of visor
- Lo-Pro model also available, see separate listing
- Currently 4-6 week production lead time
-
Westcott Designs roof rack floor inserts for 2023-'24 Toyota Sequoia modular roof rack. Laser cut steel panels and powder coated black for a strong durable finish. Designed to be used in conjunction with our Westcott Designs modular roof rack. Includes complete hardware, lifetime warranty, designed and built in the USA. *Not compatible with the Lo-Pro model roof rack -
Westcott Designs preload collar lift kit for the all-new 2023-'24 Toyota Sequoia! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks and hard anodized black for a strong, durable finish. This kit gives you 2.5” of lift in the front and 1” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! Note: These new Sequoia's share a lot of the same suspension components as the new platform Tundra. If you need help figuring out what kit fits your specific model, please watch the link below to learn how to identify what kit you need. WHAT KIT DO I BUY? *Watch This Video* *Patent Pending *No shocks are included with any preload collar lift kits This kit provides the following lifts:- 2023-'24 Sequoia static suspension equipped trucks: 2.5” (front lift) and 1.00” (rear lift)
- 2023-'24 Sequoia AVS/Air Ride equipped trucks: 2.0" (front lift) and 7/8" (rear lift)
- Lead times for new orders vary from 4-5 weeks for raw finish kits and 5-6 weeks for black anodize finish kits
-
Westcott Designs rear hatch ladder for the all new 2023-'24 Toyota Sequoia! Construction is all aluminum to keep it light weight. The uprights are double layered 1/4 aluminum to make them super rigid. We realized with all the ladders on the market they just did not have large enough steps so we took it to the next level. We put in a 1”x 2” step to reassure a solid step ever time. Each step has tracks in it to allow for additional attachment points. This ladder is the most solid mounting ladder on the market! SEQUOIA LADDER MOUNT TEMPLATE How strong is our ladder? Click to see!- Signature bottle opener
- Precision laser cut and welded top plate
- All extrude honed step system
- All black stainless hardware
- Fully Assembled
- FREE Shipping (Within the continental United States)
- Due to high volume of orders, new orders ship within 2-3 weeks of date of order placed.
-
Westcott Designs rock sliders for the all new 2023-'24 Toyota Sequoia. Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in *DOM steel, in either MIG or TIG welded options. The frame plates and tube gussets are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. DOM tubing will give you the ultimate protection when out on the trails and will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK59 black powder coat finish. Options:- Raw DOM, MIG Welded - $1470 a set.
- Raw DOM, TIG Welded - $1670 a set.
- Top plates are optional for an extra $180.00. (Top plates are a great option to assist with ease of either entering or exiting the vehicle; especially helpful if you have little ones around).
- Traditional black powder coat (BK59) for an additional $275.00 per set.
- Currently experiencing around an 5-6-week lead time on all new slider orders.
-
Westcott Designs Front Leveling preload collar lift kit for the all-new 2023-'24 Toyota Sequoia TRD PRO! This kit features CNC machined lower preload collars and top shim plates. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. Our Westcott kit gives you additional 2” of front lift using your factory shocks and springs and includes complete hardware for an easy install. This lift kit is designed to level the stance of your ride front to rear and allows you run up to a 35" tire with minor trimming. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. These kits along with all Westcott products have been designed and built here in house Phoenix, AZ in the great USA! https://www.youtube.com/watch?v=r3qOlRBxZDg -
Westcott Designs preload collar lift kit for the all-new 2023-'24 Toyota Sequoia TRD PRO! This kit features CNC machined lower preload collars, top shim plates, and rear billet lift pucks. Kits are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. Our Westcott kit gives you additional 3” of lift in the front and *1.00” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire without a Body Mount Chop (37” tires are compatible if used with the correct wheel size & offset along with our clearance kit and BMC) These kits along with all Westcott products have been designed and built here in house in Phoenix, AZ in the great USA! *Patent Pending *No shocks are included with purchase This kit provides the following lifts:
- 2023-'24 Sequoia Fox PRO suspension equipped trucks: 3” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 4-5 weeks for raw finish kits and 5-6 weeks for black anodize finish kits
-
Westcott Designs Bed Stiffeners for the all new 2024 Tacoma! Reduce wear and tear on your bed when out on the trails with a set of our Bed Stiffeners. Laser cut and proudly hand welded by our skilled craftsmen right here in the good ol’ USA! Powder coated black and include complete hardware including the stainless steel badging to add a little "bling" to your bed! -
Westcott Designs rock sliders for the all new 2024 Toyota Tacoma Short Bed (2WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit 4WD models, see separate listing) -
Westcott Designs rock sliders for the all new 2024 Toyota Tacoma Short Bed (4WD Only). Our sliders are laser cut, hand built, and hand welded which make them some of the best on the market. Our sliders are all .120 wall tubing and offered in both *HREW and *DOM steel, in either MIG or TIG welded options. The frame plates are also laser cut out of .188 *HRPO steel and feature a true bolt on install with supplied hardware. No matter what variation you select our sliders in, they will offer you excellent protection. For ultimate protection when out on the trails, our DOM tubing option will provide you with the most robust impact resistance along with the confidence of the longest lasting and highest quality materials. We have different options for angle of approach (0 degree & 20 degree), with or without top plates and a durable BK08 black powder coat finish. A new feature for these sliders with the optional top plates is our bottle opener plate that comes comes with a satin black powder coated stainless steel top plate and an additional accent plate in raw stainless steel that you can either leave raw finish or you can paint them to match your ride! We primer coat all our sliders first to prevent corrosion from forming no matter what the weather conditions they are put through. (Will not fit 2WD models, see separate listing)
-
Ditch Light Brackets
Westcott Designs A-pillar ditch light brackets for the all new 2024 Tacoma! CAD designed, laser cut & bent and powder coated black for a durable finish. Easy install, no drilling, cutting or modification needed and uses OEM mounting hardware. This low profile designed mount not only makes for a cleaner installed look but also reduces wind noise. Choose from a variety of light options to suit your specific needs*. *Lights not included. -
Now Available! Westcott Designs preload collar lift kit for the all-new 2024 Toyota Tacoma! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with the proper offset wheel. -
Westcott Designs rear lift pucks for the new 2024 Tacoma that give you 3/4" of rear only lift. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. Price per pair. *Do NOT attempt to stack pucks for more lift, you will damage other rear suspension components and it is extremely unsafe* -
Westcott Designs roof rack for the all new 2024 Tacoma! New features include optional side panel cutouts for accessory light mounts or can be used as a grab handle to aid in accessing your gear, our newly designed yet still signature bottle openers, and now you have the option to have the bottle openers with or without the "truck" logo! Other features include industry standard Series 10 extrude honed cross bars and your choice of front visor to accept lighting options of your choice*. The rack is constructed of aluminum for light weight with steel mounting brackets for strength and to maximize load capacity. All racks come with complete hardware and are a true "no-drill" install. Lastly, our rack measures 65" x 47" and features a low profile installed height of just 3.5”. *Lights sold separately. *Please note, we engineer all of our roof racks with little to no wind noise however some users have reported slight amount of wind noise with the side panels that have the handle cutouts. If wind noise at highway speeds is a concern for you, you would be best served with our standard design side panels.- No cut out visor
- Single row 40-inch light bar cut out
- Rigid Adapt light bar cut out
- (10) light 4” cut out
- Signature bottle openers with or without the truck logo
- Currently 4 week production lead time
-
Westcott Designs preload collar lift kit for the all-new 2024 Toyota Tacoma TRD PRO! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. From the factory the new Tacoma PRO comes with 1.1" of front lift. Our Westcott kit gives you additional 1.75” of lift in the front and .75" in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with the proper offset wheel. -
Westcott Designs rear lift pucks for 4th & 5th Generation Toyota 4Runner. Gives you 1.25" of rear lift only on standard rear coil suspension equipped 4Runner. CNC machined billet aluminum, offered in both standard raw finish or optional black anodized finish. Made in the U.S.A and come with a lifetime warranty. -
Now Available! ALL NEW 2024 Lexus GX 550 Preload Lift Kit from Westcott Designs! This kit features all new CNC machined components and are available in both raw aluminum and hard black anodized finishes for that true "like factory" look. This kit gives you 2.50” of lift in the front and .75” in the rear using your factory shocks and springs and includes complete hardware for an easy install. This is NOT your traditional spacer lift kit, you retain your factory ride quality, factory suspension geometry and still able to align the vehicle to factory specs after install. It does NOT require new UCA’s, and you can run up to a 35” tire with the proper offset wheel.
-
Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:- 4Runner: 3” (front lift) and 1.25” (rear lift)
- Tacoma: 3” (front lift) and 1” (rear lift)
- Tundra: 3” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Bilstein 5100’s are only adjustable to 2.3”. With our Westcott Designs kit you can adjust them over 3” and run 285/70R17 on the 4Runner (295/70R18 on the Tundra & 285/75R16 on the Tacoma) without rubbing. This is not your typical spacer lift that you hear horror stories about. Our kit will not limit your suspension or bottom out prematurely. It works the same way a coil over works just without being adjustable. You will still retain the factory suspension geometry. Our preload kits are all built out of billet aluminum and CNC milled to make them the highest quality as possible. We then hard anodized them to make them look better than factory. With our kit you don’t have to max out your 5100 and can retain a great ride. We make everything in house to make sure our quality is at the level our customers deserve. This kit provides the following lifts:
- 4Runner: 3” (FRONT ONLY)
- Tacoma: 3” (FRONT ONLY)
- Tundra: 3” (FRONT ONLY)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Westcott Designs Bilstein TRD PRO preload collar lift kit for model years 2015-2018, 4Runner, Tacoma, or Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
This is for a Bilstein TRD PRO (FRONT ONLY) (2015 - 2018), available for a 4Runner, Tacoma, or Tundra. This is not a spacer lift. This kit does not change the geometry of the factory suspension. This kit will not limit your factory travel or extend the travel pass factory. The ride quality is not compromised in anyway. This kit includes everything you will need. You will not need to replace the upper control arms. You can run up to a 33” tire with out a body chop. This kit provides the following lifts:
- 4Runner (2015 - 2018): 1.5” (front lift) and 1.25” (rear lift)
- Tacoma (2015 - 2016): 1.5” (front lift) and 1” (rear lift)
- Tundra (2015 - 2017): 1.5” (front lift) and 1” (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and 2-3 weeks for black anodize finish kits
-
Cooler 1" ratchet strap with snap hooks and soft tie made by SpeedStrap. Cushion grip ratchet and "S" hook with integrated retention clip. Includes a floating D-Ring on the opposite end to create an additional loop if needed. These ratcheting tie downs feature a sewn in soft tie for easy safe attachment. -
Cooler/Work Top Pans And Hardware -
Out of stock
With adjustability and durability, the 2-bike hitch rack stands up to your daily (and extraordinary) life.Built to fit a wide range of bikes
Go ahead—toss any bike in your stable on here. This rack holds tires up to 4.8 in. wide. Also, the articulated front cradle has 3 points of adjustability so you can get the handlebar and seatpost clearance you need. -
Full Length Modular Roof Rack
Westcott Designs FJ Cruiser modular roof rack. Features extrude honed cross bars and your choice of front valance to accept lighting options of your choice*. We carefully designed our rack to minimize wind noise with all light configurations by following the contour of the roof line. Features aluminum construction for light weight with steel mounting brackets for strength and to maximize load capacity. Our rack features a low profile installed height of just 3.5”. *Lights sold separately.- (6) light 6” cut out
- (10) light 4” cut out
- Single row 40-inch light bar cut out
- No cut out visor
- Currently 4-6 week production lead time
-
The FJ Cruiser spare tire relocation mount kit. It’s designed to allow the FJ to run up to a 35” spare tire and no have and clearance issues. It is built with high quality made parts all built in house. We take pride in making sure our products are to the highest quality. -
Westcott Designs preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. After install your truck or SUV will sit level front to rear. This kit includes everything you will need, NO replacement Upper Control Arm (UCA) needed and you can run up to a 33” tire with out a body mount chop (BMC). *Please note, NO shocks are included with this kit. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift) 1.25" (rear lift)
- Tacoma (2017-2019): 1.5” (front lift) 1.0" (rear lift)
- Tundra (2018-2021): 1.5” (front lift) 1.0" (rear lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and around 2-3 weeks for black anodize finish kits
-
Westcott Designs (FRONT ONLY) preload collar lift kit for Factory Fox TRD PRO equipped, 4Runner, Tacoma, and Tundra. This is NOT a spacer lift, this kit retains your factory ride quality, factory suspension geometry, you can still align it to factory specs and does not effect your suspension travel. This kit is designed to be utilized in conjunction with an aftermarket rear spring, leaf pack or Add-A-Leaf (AAL) accordingly depending on your build preferences. This kit provides the following lifts:- 4Runner (2019-2020*): 1.5” (front lift)
- Tacoma (2017-2019): 1.5” (front lift)
- Tundra (2018-2021): 1.5” (front lift)
- Lead times for new orders vary from 1-2 weeks for raw finish kits and around 2-3 weeks for black anodize finish kits
-
Out of stock
Grill Mount for Universal Hitch Mounted Rear RackKey Features
- Digital Elite controller keeps the preset temperature within +/- 20 degrees Fahrenheit for reliable cooking
- E-Z drain grease management system draws all of your excess liquids into a bucket underneath
- Versatile grill allows you to smoke, grill, bake, roast or braise for multiple cooking options
- Large capacity hopper allows you to hold up to 8 lbs of pellets at once
-
Note: all tabs and plates are all laser cut to give our customer the highest quality and most precise of parts as possible. We are a full fab shop and a full production shop. Please give use a call on your small or large projects. You won't be disappointed you did. In house 3K fiber table laser. In house 3K fiber tube laser. In house Robotic welder We have some of the top fabricators and welders in the country.
-
Steel hammock mounting poles. Our accessory Hammock Mount Kit works on all of our rack configurations. We recommend the single or double mask hammock from ENO. Product Dimensions: 16.5" top and 10.5"bottom piece This Hammock Mount has a 1.5" insert. -
SETTLE IN FOR SOME ME-TIME. Don't feel like sharing? The SingleNest understands. Pull the SingleNestout of its soft-ball-sized stuff sack, clip it to your handy-dandy Atlas Straps, and settle in for some me-time. Light enough to make the backpacker's cut, but robust enough for backyard luxury, the SingleNest is the go-to for any occasion.- 400lb Capacity
- Aluminum Wiregate Carabiners
- Heavy Duty Triple Stitched Seams
